Agilent Technologies AIC 5000 Manuel utilisateur

EZChrom Elite

Agilent Instrument

Controller Installation

Guide

Notices

2009.

No part of this manual may be

reproduced in any form or by any

means (including electronic storage

and retrieval or translation into a

foreign language) without prior

agreement and written consent from

Agilent Technologies, Inc. as

governed by United States and inter-

national copyright laws.

Manual Part Number

G6783-90003

Edition

Document Revision 3.3.2

March, 2009

Agilent Technologies, Inc.

6612 Owens Dr.

Pleasanton, CA 94588-3334

Warranty

The material contained in this

document is provided “as is,” and is

subject to being changed, without

notice, in future editions. Further, to

the maximum extent permitted by

applicable law, Agilent disclaims all

warranties, either express or

implied, with regard to this manual

and any information contained

herein, including but not limited to

the implied warranties of merchant-

ability and fitness for a particular

purpose. Agilent shall not be liable

for errors or for incidental or

consequential damages in

connection with the furnishing, use,

or performance of this document or

of any information contained herein.

Should Agilent and the user have a

separate written agreement with

warranty terms covering the

material in this document that

conflict with these terms, the

warranty terms in the separate

agreement shall control.

Technology Licenses

The hardware and/or software

described in this document are

furnished under a license and may

be used or copied only in

accordance with such license.

Restricted Rights Legend

If software is for use in the

performance of a U.S. Government

prime contract or subcontract,

Software is delivered and licensed

as "Commercial computer software"

as defined in DFAR 252.227-7014

(June 1995), or as a "commercial

item" as defined in FAR 2.101(a) or

as "Restricted computer software"

as defined in FAR 52.227-19 (June

1987) or any equivalent agency

regulation or contract clause. Use,

duplication or disclosure of Software

is subject to Agilent Technologies’

standard commercial license terms,

and non-DOD Departments and

Agencies of the U.S. Government

will receive no greater than

Restricted Rights as defined in FAR

52.227-19(c)(1-2) (June 1987). U.S.

Government users will receive no

greater than Limited Rights as

defined in FAR 52.227-14 (June

1987) or DFAR 252.227-7015 (b)(2)

(November 1995), as applicable in

any technical data.

AIC Installation and Configuration iii

Contents

1Using This Guide ................................................................................. 1

Introduction ............................................................................................................ 1

Who Should Read This Guide? ...........................................................................1

2About the AIC ...................................................................................... 3

3AIC 5000 Installation and Configuration.......................................... 5

Before You Begin .................................................................................................. 5

AIC 5000 Configuration ........................................................................................ 7

Step 1. Copy EZChrom Elite folders to the USB memory stick............ 7

Step 2. Preliminary setup ........................................................................... 8

Step 3. Set up the IP address on the AIC..............................................10

Step 4. Add the AIC to the domain.........................................................10

Step 5. Add domain user to the AIC local Administrators group......11

Step 6. Run DCOMServerSettings ..........................................................11

Step 7. Add one or more network printers............................................12

Step 8. Change the administrator’s password .....................................13

Step 9. Set time, date, and regional settings........................................13

Step 10. Enable screen lock.....................................................................14

Step 11. Set data system enterprise settings.......................................14

Install an A/D Converter....................................................................................15

Install the SS420x................................................................................................15

Configure the SS420x .........................................................................................16

iv AIC Installation and Configuration

Connect Instruments ..........................................................................................17

Test the AIC..........................................................................................................19

Notes on Using the AIC 5000............................................................................19

4Update Procedure for AIC 5000 .......................................................20

5Replacing an AIC Revision A or Revision B...................................22

AIC 5000 Specifications .....................................................................................23

6AIC Revision B Installation and Configuration..............................26

Before You Begin ................................................................................................26

AIC Revision B Installation................................................................................26

Step 1. Set up the AIC Rev B ....................................................................27

Step 2. Setup the IP address on the AIC Rev B ...................................28

Step 3. Add the AIC Rev B to the domain .............................................28

Step 4. Add a domain user to the AIC local Administrators group ..29

Step 5. Run DCOMServerSettings ..........................................................29

Step 6. Add one or more network printers............................................30

Step 7. Change the administrator’s password .....................................31

Step 8. Set time, date, and regional settings........................................31

Step 9. Enable screen lock .......................................................................31

Step 10. Set data system enterprise settings.......................................32

Install an A/D Converter....................................................................................32

Install the SS420x .......................................................................................33

Configure the SS420x.................................................................................33

Connect Instruments ..........................................................................................34

AIC Installation and Configuration v

Test the AIC..........................................................................................................35

Notes .....................................................................................................................35

7Updating the AIC Rev B Software .................................................. 37

Rev B Specifications...........................................................................................39

8Revision A Installation and Configuration..................................... 40

Before You Begin ................................................................................................40

AIC Configuration Steps.....................................................................................40

Setup the IP Address on the AIC .............................................................41

Add the AIC to the Domain .......................................................................42

Add a Domain User to the AIC Local Administrators Group ..............43

Add One or More Network Printers ........................................................45

Changing the Administrator’s Password................................................45

Setting Time, Date, and Regional Settings ............................................46

Enable Screen Lock ....................................................................................46

Data System Enterprise Settings .............................................................46

Configure the SS420x .........................................................................................47

Testing the AIC ....................................................................................................49

Updating the AIC Image .....................................................................................50

Update Procedure................................................................................................51

Notes .....................................................................................................................53

Rev A Specifications...........................................................................................53

9Using VNC for Troubleshooting....................................................... 56

AIC 5000 Installation and Configuration 1

1Using This Guide

Introduction

Use this guide to learn how to install and configure the Agilent

Instrument Controller (AIC) for use with the EZChrom Elite data

system. The AIC is a network appliance that controls instruments

and acquires data digitally. Be sure to refer to the section of this

guide that corresponds with the AIC version you have. See the next

chapter, “About the Agilent Instrument Controller”, for details.

Who Should Read This Guide?

This document is designed for the system administrator who will

install the AIC.

AIC 5000 Installation and Configuration 3

2About the AIC

The AIC is a device that controls instruments and acquires data

digitally. It is for use in client/server environments only. Each AIC

can control and acquire digital data from up to 4 GC or LC

instruments, or up to 16 analog channels of data (A/D required), up

to 2 photodiode array detectors (PDA) or combinations of the

above.

Please see the Agilent Technologies Website www.Agilent.com and

browse for Technical Support for Life Sciences and Chemical

Analysis for information on EZChrom Elite software version

support for AICs.

Note

There are three versions of the AIC: The

AIC 5000 is black in color and has

“Instrument Controller 5000”stenciled on

the front of the unit. Revision B is silver

in color and is marked with a “Revision

B” sticker on the rear. Revision A has

limited instrument support for versions

after EZChrom Elite Revision 3.2.1. It is

black in color and is marked with a

“Revision A” sticker on the rear or has no

sticker. AIC Rev A is not covered in this

document.

Note

The AIC is shipped with a USB memory

stick, which is required for software

installation and updates. Please keep this

in a safe place for future use.

Table des matières

Autres manuels Agilent Technologies Contrôleurs

Agilent Technologies

Agilent Technologies M9405A Manuel

Agilent Technologies

Agilent Technologies 11896A Manuel

Agilent Technologies

Agilent Technologies X3501-64003 Manuel utilisateur

Agilent Technologies

Agilent Technologies G2743A Mode d’emploi

Agilent Technologies

Agilent Technologies ETC 60 Manuel utilisateur

Agilent Technologies

Agilent Technologies TwisTorr Medium-TMP Rack Manuel utilisateur

Agilent Technologies

Agilent Technologies XGS-600 Manuel utilisateur

Agilent Technologies

Agilent Technologies Turbo-V 1000HT Manuel utilisateur

Agilent Technologies

Agilent Technologies 6850 GCs Mode d’emploi

Agilent Technologies

Agilent Technologies Agilent 35900E Manuel utilisateur

Agilent Technologies

Agilent Technologies TwisTorr 74 FS PCB 24 Manuel utilisateur

Agilent Technologies

Agilent Technologies 929-0196 Manuel utilisateur

Agilent Technologies

Agilent Technologies TV70 Navigator Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 929-0022 Manuel utilisateur

Agilent Technologies

Agilent Technologies 4UHV Manuel utilisateur

Agilent Technologies

Agilent Technologies RS-232 Manuel utilisateur

Agilent Technologies

Agilent Technologies PCG-750 Manuel utilisateur

Agilent Technologies

Agilent Technologies 4UHV Manuel utilisateur

Agilent Technologies

Agilent Technologies Turbo-V 81-AG Manuel utilisateur

Agilent Technologies

Agilent Technologies 969-9871 Manuel utilisateur

Agilent Technologies

Agilent Technologies TwisTorr Medium-TMP X3501-64016 Manuel utilisateur

Agilent Technologies

Agilent Technologies Eyesys Mini-B/A Manuel utilisateur

Agilent Technologies

Agilent Technologies Turbo-V 550 Manuel utilisateur

Agilent Technologies

Agilent Technologies 78581B Instructions d'installation et d'entretien

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur