AGI WRX Series Manuel utilisateur
LOOKING FOR PARTS?
Check out our online
Parts Catalog!
Read this manual before using product. Failure to
follow instructions and safety precautions can
result in serious injury, death, or property
damage. Keep manual for future reference.
Part Number: 31060 R3
Revised: January 2022
Original Instructions
WRX Series
Portable Grain Auger
Operator’s Manual
This manual applies to:
Westfield, AGI, Hutchinson, Mayrath
8-31, 8-36, 8-41, 8-46, 8-51, 8-56, 8-61, 8-71, 8-76
10-31, 10-36, 10-41, 10-51, 10-61, 10-71
This product has been designed and manufactured to meet general engineering standards. Other local
regulations may apply and must be followed by the operator. All personnel must be trained in the correct
operational and safety procedures for this product. Use the sign-off sheet below to record initial and periodic
reviews of this manual with all personnel.
Date Employee Name and Signature Employer Name and Signature
WRX SERIES – PORTABLE GRAIN AUGER
31060 R3 3
CONTENTS
1. Introduction ............................................................................................................................................ 5
1.1 Serial Number Location............................................................................................................. 5
1.2 Intended Use ............................................................................................................................. 6
1.2.1 Misuse ........................................................................................................................ 6
2. Safety....................................................................................................................................................... 7
2.1 Safety Alert Symbol and Signal Words...................................................................................... 7
2.2 General Safety Information....................................................................................................... 7
2.3 Rotating Flighting Safety ........................................................................................................... 8
2.4 Overhead Power Lines .............................................................................................................. 8
2.5 Upending ................................................................................................................................... 8
2.6 Rotating Parts Safety................................................................................................................. 8
2.7 Work Area Safety ...................................................................................................................... 9
2.8 Guards Safety .......................................................................................................................... 10
2.9 Raising and Lowering the Auger ............................................................................................. 10
2.10 Hand Winch Safety................................................................................................................ 10
2.11 Hydraulic Winch Safety ......................................................................................................... 11
2.12 Positioning the Auger............................................................................................................ 11
2.13 Towing the Auger .................................................................................................................. 11
2.14 Drives and Lockout Safety..................................................................................................... 12
2.14.1 Gas Engine Safety................................................................................................... 12
2.14.2 Electric Motor Safety.............................................................................................. 13
2.14.3 PTO Driveline Safety............................................................................................... 13
2.14.4 Hydraulic Power Safety .......................................................................................... 14
2.15 Tire Safety.............................................................................................................................. 15
2.16 Battery Safety ........................................................................................................................ 15
2.17 Personal Protective Equipment............................................................................................. 16
2.18 Safety Equipment .................................................................................................................. 17
2.19 Safety Decals ......................................................................................................................... 17
2.19.1 Decal Installation/Replacement............................................................................. 17
2.19.2 Safety Decal Locations and Details ........................................................................ 17
3. Features................................................................................................................................................. 28
4. Transport............................................................................................................................................... 29
4.1 Transport Safety ...................................................................................................................... 29
4.2 Transport Preparation............................................................................................................. 30
4.3 Connect the Auger to the Towing Vehicle.............................................................................. 30
4.3.1 Enclosed Hopper ...................................................................................................... 31
5. Placement ............................................................................................................................................. 32
5.1 Placement Safety..................................................................................................................... 32
5.2 Positioning the Auger.............................................................................................................. 32
5.3 Hand Winch Operation............................................................................................................ 33
5.4 Hydraulic Winch Operation..................................................................................................... 34
6. Operation .............................................................................................................................................. 35
6.1 Operation Safety ..................................................................................................................... 35
6.2 Start-up and Break-in .............................................................................................................. 35
6.3 Operation - Electric Motor Models......................................................................................... 36
WRX SERIES – PORTABLE GRAIN AUGER
4 31060 R3
6.4 Operation - Gas Engine Models .............................................................................................. 36
6.5 Operation - PTO Drive ............................................................................................................. 36
6.6 Operation - Hydraulic Motor Models ..................................................................................... 37
6.7 Emergency Shutdown ............................................................................................................. 38
6.8 Restarting with a Full Tube ..................................................................................................... 38
6.9 Bin Level Indicators ................................................................................................................. 38
6.10 Use of Grain Spreaders ......................................................................................................... 38
6.11 Shutdown .............................................................................................................................. 39
6.12 Operating the Auger with Fertilizer ...................................................................................... 39
6.13 Storage................................................................................................................................... 39
7. Maintenance ......................................................................................................................................... 40
7.1 Maintenance Safety ................................................................................................................ 40
7.2 Maintenance Schedule............................................................................................................ 40
7.3 Visually Inspect the Equipment............................................................................................... 41
7.4 Inspect Hydraulic Hoses and Fittings ...................................................................................... 42
7.5 Lubricate the Equipment......................................................................................................... 42
7.5.1 PTO Driveline............................................................................................................ 42
7.6 Apply Oil to the Motor Mount ................................................................................................ 43
7.7 Check the Gearbox Oil............................................................................................................. 43
7.8 Change the Gearbox Oil .......................................................................................................... 43
7.9 Adjust the Upper Drive Chain ................................................................................................. 44
7.10 Grease the Intake Bushing and Upper Drive Chain .............................................................. 44
7.11 Clean and Wash the Equipment ........................................................................................... 45
7.12 Tension the Drive Belts ......................................................................................................... 45
7.13 Align the Drive Belts.............................................................................................................. 46
7.14 Replace the Drive Belts ......................................................................................................... 46
7.15 Repack the Wheel Bearings with Grease.............................................................................. 46
7.16 Inspect and Service the Hand Winch and Lift Cable............................................................. 47
7.17 Inspect and Service the Hydraulic Winch and Lift Cable ...................................................... 48
8. Troubleshooting.................................................................................................................................... 49
9. Specifications ........................................................................................................................................ 53
10. Appendix ............................................................................................................................................. 56
10.1 Bolt Torque............................................................................................................................ 56
10.2 Installing the EMD on the Right-Hand side........................................................................... 57
10.3 Installing the PTO-BD on the Left-Hand side ........................................................................ 61
11. AGI Limited Warranty......................................................................................................................... 63
31060 R3 5
1. Introduction
Thank you for your purchase. Follow the instructions in this manual for safe use of this auger.
Following proper operation and maintenance will help to keep the auger running in optimal condition.
Keep this manual handy for frequent reference and to review with new personnel. A sign-off form is
provided on the inside front cover for your convenience. If any information in this manual is not
understood or if you need additional information, please contact AGI or your representative for
assistance.
This manual should be regarded as part of the equipment.
1.1. Serial Number Location
The serial number location for your auger is shown in the figure below. Have the serial number ready when
ordering parts or requesting service or other information. Record information in the table below for easy
reference.
Model Number
Serial Number
Date Received
WRX SERIES – PORTABLE GRAIN AUGER 1. INTRODUCTION
6 31060 R3
1.2. Intended Use
The auger is intended for use as listed below and described throughout this manual. Use in any other way is
considered contrary to the intended use and is not covered by the warranty.
Intended use for the auger:
• Handling grain, pulse crops, treated seeds, or other similar materials.
1.2.1 Misuse
Do not install/use the auger for/with:
• transferring material other than dry, free-flowing food-grains.
• lifting or using as a hoist or crane.
1. INTRODUCTION WRX SERIES – PORTABLE GRAIN AUGER
31060 R3 7
2. Safety
2.1. Safety Alert Symbol and Signal Words
This safety alert symbol indicates important safety messages in this manual. When you see
this symbol, be alert to the possibility of injury or death, carefully read the message that
follows, and inform others.
Signal Words: Note the use of the signal words DANGER,WARNING,CAUTION, and NOTICE with the safety
messages. The appropriate signal word for each message has been selected using the definitions below as a
guideline.
Indicates an imminently hazardous situation that, if not avoided, will result in serious injury or
death.
Indicates a hazardous situation that, if not avoided, could result in serious injury or death.
Indicates a hazardous situation that, if not avoided, may result in minor or moderate injury.
Indicates a potentially hazardous situation that, if not avoided, may result in property damage.
2.2. General Safety Information
Read and understand all safety instructions, safety decals, and manuals and follow them when operating or
maintaining the equipment.
• Owners must give instructions and review the information initially and annually with
all personnel before allowing them in the work area. Untrained users/operators
expose themselves and bystanders to possible serious injury or death.
• Use for intended purposes only.
• Do not modify the auger in any way without written permission from the manufacturer and is not covered
by the warranty.
• Follow a health and safety program for your worksite. Contact your local occupational health and safety
organization for information.
• Follow applicable local codes and regulations.
WRX SERIES – PORTABLE GRAIN AUGER 2. SAFETY
8 31060 R3
2.3. Rotating Flighting Safety
• KEEP AWAY from rotating flighting.
• DO NOT remove or modify flighting guards, doors, or covers.
Keep in good working order. Have replaced if damaged.
• DO NOT operate the auger without all guards, doors, and
covers in place.
• NEVER touch the flighting. Use a stick or other tool to
remove an obstruction or clean out.
• Shut off and lock out power to adjust, service, or clean.
2.4. Overhead Power Lines
• When operating or moving, keep auger away from overhead
power lines and devices.
• The auger is not insulated.
• Electrocution can occur without direct contact.
2.5. Upending
• Anchor intake end and/or support discharge end to prevent
upending.
• Intake end must always have downward weight. Do not
release until attached to tow bar or resting on ground.
• Do not raise intake end above tow bar height.
• Empty the auger and fully lower before moving.
2.6. Rotating Parts Safety
• Keep body, hair, and clothing away from rotating pulleys,
belts, chains, and sprockets.
• Do not operate with any guard removed or modified. Keep
guards in good working order.
• Shut off and lock out power source before inspecting or
servicing machine.
2. SAFETY WRX SERIES – PORTABLE GRAIN AUGER
31060 R3 9
2.7. Work Area Safety
• Have another trained person nearby who can shut down the auger in case of accident.
• Do not allow any unauthorized persons in the work area.
• Keep the work area clean and free of debris.
Figure 1. Work Area
Support Discharge End
UNDER AUGER AND
UNDERCARRIAGE AREA
HAZARD
KEEP AWAY
AUGER INTAKE AREA
HAZARD
KEEP AWAY
Wheel Chocks Wheel Chocks
HAZARD AREA
KEEP AWAY
WORK AREA!
AUTHORIZED PERSONNEL ONLY
Gravity Wagon
or Truck
Walking Surface
Is it slippery?
Are There Things To Trip You?
OVERHEAD WIRES
KEEP AWAY
WRX SERIES – PORTABLE GRAIN AUGER 2. SAFETY
10 31060 R3
2.8. Guards Safety
• Keep guards in place. Do not operate with guard removed.
• Do not walk on, step on, or damage guards.
• Lock out power before removing a guard.
• Ensure all guards are replaced after performing maintenance.
2.9. Raising and Lowering the Auger
• Before raising/lowering/moving/adjusting the auger, make sure the area around the auger is
clear of obstructions and/or untrained personnel. Never allow anyone to stand on or
beneath the auger when it is being placed.
• Lower the auger to its lowest position when not in use.
• Empty the auger before raising or lowering.
• Do not get on or beneath the auger when raising or lowering.
• Raise and lower auger on reasonably level ground only.
• Never attempt to increase height of the auger by positioning wheels on lumber, blocks, or by
any other means. To do so will result in damage to auger and/or serious injury.
• Do not raise the auger in high winds.
2.10. Hand Winch Safety
When Equipped:
• Inspect lift cable before using. Replace if frayed or damaged. Make sure lift cable is seated
and tracking properly and cable clamps are secure.
• Tighten brake lock by turning winch handle clockwise at least two clicks after lowering the
auger.
• Lower the auger fully before towing, then rotate winch handle until cable has light tension.
• Do not lubricate winch brake discs.
2. SAFETY WRX SERIES – PORTABLE GRAIN AUGER
Autres manuels pour WRX Series
1
Table des matières
Autres manuels AGI Outils
AGI
AGI W13 Manuel utilisateur
AGI
AGI UTX Series Manuel utilisateur
AGI
AGI GRAINMAXX 7400 Series Manuel utilisateur
AGI
AGI Westfield MKX16 Manuel utilisateur
AGI
AGI MKX2 Series Manuel utilisateur
AGI
AGI W13 Manuel utilisateur
AGI
AGI GrainMaxx 5300 Series Manuel utilisateur
AGI
AGI MKX16 Series Manuel utilisateur
AGI
AGI MK8 Series Manuel utilisateur
AGI
AGI W13 Manuel utilisateur
