4/70
2 Safety and dangers
ÂMake sure that the device is not used without instructions.
ÂMake sure that the device is used exclusively according to the instructions.
ÂMake sure that the safety settings are not disabled.
ÂMake sure that indication labels and caution labels are not removed.
ÂDo not open the device with tools (screwdriver etc.).
ÂMake sure that the device is not converted or modified.
ÂAvoid using accessories of other producers that are not recommended by Agatec.
ÂMake sure that the device is not used carelessly:
Îwhen working on scaffolds
Îwhen climbing ladders
Îwhen measuring near running machines
Îwhen measuring on open machine parts or installations
ÂAvoid aiming directly at the sun.
ÂAvoid blinding other persons intentionally (also in darkness).
ÂMake sure that the measuring position is secured sufficiently (e.g. in streets, on construction
sites, etc.).
ÂMake sure that the device is in proper and flawless condition.
ÂDo not use a defective device.
3 Correct ways of employment
Îmeasuring of distances
Îcalculation of functions
e.g. areas and volumes
ÎUse the device exclusively in an atmosphere that is permanently inhabitable by humans.
4 Foreseeable misuse
ÂDo not use the device as a laser pointer.
ÂDo not use the device in explosive or aggressive environments.
5 Areas of responsibility
5.1 Area of responsibility of the manufacturer of the original
equipment
Agatec SAS, Le Mesnil Le Roi, 78600 France (hereafter Agatec):
ÎAgatec is responsible for the safety-related flawless delivery of the device, including the
operating instructions.
ÎAgatec is not responsible for accessories produced by other manufacturers.
Agatec DM100.book Page 4 Thursday, April 1, 2010 12:48 PM
