Aewin AW-EM730 Manuel utilisateur

AEWIN Technology Inc.

3.5” Embedded SBC

Model Number AW-EM730

Intel® Pentium® M Embedded SBC with LVDS, LAN, Audio & SSD

User’s Manual

Version 1.3

User’s Manual

Manual Edition 1.3, Mar 2006

This document contains proprietary information protected by copyright. All rights

are reserved; no part of this manual may be reproduced, copied, translated or

transmitted in any form or by any means without prior written permission of the

manufacturer.

The content of this manual is intended to be accurate and reliable; the original

manufacturer assumes no responsibility for any inaccuracies that may be contained

in this manual. The original manufacturer reserves the right to make improvements

to the products described in this manual at any time without prior notice.

Trademarks

IBM, EGA, VGA, XT/AT, OS/2 and PS/2 are registered trademarks of International

business Machine Corporation

Award is a trademark of Award Software International, Inc

Intel is a trademark of Intel

RTL is a trademark of Realtek

VIA is a trademark of VIATechnologies, Inc

Microsoft, Windows, Windows NT and MS-DOS are either trademarks or registered

trademarks of Microsoft Corporation

All other product names mentioned herein are used for identification purpose only

and may be trademarks and/or registered trademarks of their respective companies

Limitation of Liability

While reasonable efforts have been made to ensure the accuracy of this manual, the

manufacturer and distributor assume no liability resulting from errors or omissions in

this manual, or from the use of the information contained herein.

User’s Manual

Table of Contents

Chapter 1. General Information ......................................................................................... 4

1.1 Introduction............................................................................................................... 4

1.2 Specification ............................................................................................................. 4

1.3 Package.....................................................................................................................5

1.4 Precautions................................................................................................................ 6

1.5 Board Layout ............................................................................................................ 7

1.6 Board Dimension...................................................................................................... 8

Chapter 2. Connector/Switch Location and Configuration............................................. 9

2.1 Connector/Jumper Location and Definition.............................................................. 9

2.2 Install Memory........................................................................................................ 11

2.3 Connector and Jumper Setting................................................................................ 13

Chapter 3. BIOS Setup...................................................................................................... 28

3.1 Quick Setup............................................................................................................. 28

3.2 Entering the CMOS Setup Program........................................................................ 29

3.3 Menu Options.......................................................................................................... 30

3.4 Standard CMOS Features Setup ............................................................................. 31

3.5 Advanced BIOS Features Setup.............................................................................. 32

3.6 Advanced Chipset Features Setup........................................................................... 34

3.7 Integrated Peripherals ............................................................................................. 35

3.8 Power Management Setup ...................................................................................... 38

3.9 PNP/PCI Configuration .......................................................................................... 41

3.10 PC Health Status Configuration Setup.................................................................. 43

3.11 Load Fail-Safe Defaults ........................................................................................ 43

3.12 Load Optimized Defaults...................................................................................... 44

3.13 Supervisor/User Password .................................................................................... 45

3.14 Save and Exit Setup.............................................................................................. 46

3.15 Exit Without Saving.............................................................................................. 46

Chapter 4. Software & Driver Utility................................................................................. 47

4.1 Operation System Installation................................................................................. 47

4.2 Device Driver Installation....................................................................................... 47

4.2.1. Intel 82562ET Ethernet................................................................................. 47

4.2.2. CRT and LVDS Driver.................................................................................. 48

Appendix A: Optional Module........................................................................................... 49

1. AC97 Audio Kit (SPK Out, MIC In) ........................................................................ 49

2. +12~24V Power adapter Kit..................................................................................... 51

Appendix B: Optional Cable List...................................................................................... 54

User’s Manual

Chapter 1. General Information

1.1 Introduction

The AW-EM730 3.5” embedded board is based on Intel® architecture with

852GM+ICH4 chipset supporting the Pentium® M Celeron M processor with

400MHz FSB. The memory supports DDR SO-DIMM socket up to 1GB. Through

Intel® 82562ET chipset, it can support one Ethernet port. The built-in 852GM

chipset supports CRT and LVDS panel interface.

Other features include a CompactFlash socket, one mini PCI slot for future

expansion capabilities, four USB2.0 ports, three RS-232 and one RS-232/485 Serial

port, one Parallel port, AC97 audio, watchdog timer and hardware system

monitoring, etc.

1.2 Specification

General Functions

CPU Intel® Celeron® M ULV 600MHz Zero cache processor

BIOS Award® 512KB Flash BIOS

Cache Non on-chip cache

Chipset Intel® 852GM + ICH4

I/O Chipset Winbond® 83627HF-AW

Memory Onboard one DDR SO-DIMM socket can support up to 1GB

Enhanced IDE One 44-pin IDE connector supports Ultra DMA33/66/100 mode

Serial port Three RS-232 and one RS-232/485（4wire/2wire）serial ports

KB/Mouse

connector Supports PS/2 keyboard and mouse

Parallel port Pin header for bi-directional parallel port, supports SPP, ECP and EPP

mode

USB connectors Support four USB2.0/1.1 ports

Battery Lithium battery

Watchdog timer Can generate a system reset, support software selectable timeout

interval

System Built in W83627HF-AW; support temperatures, voltage monitoring

User’s Manual

Monitoring function

PCI expansion One Mini PCI expansion slot

Flat Panel/CRT Interface

Chipset Built-in 852GM chipset

Display type Support CRT and LVDS panel interface

Ethernet Interface

Chipset One Intel 82562ET 10/100Mbps Ethernet controller

Audio Interface (Optional Audio Module)

Chipset Analog Device AD1881 AC97 CODEC

Audio interface Support Mic in, Speaker out

SSD interface One 50-pin CompactFlashTM socket

Mechanical and Environmental

Power supply voltage Single +5V power supply

Operating temperature 32 to 140℉（0 to 60℃）

Board size 5.7”(L) x 4”(W) (145mm x 102mm)

1.3 Package

Please make sure that the following items have been included in the

package before installation.

1. AW-EM730 Embedded SBC

2. Quick Installation Guide

3. Cable: Please refer to Appendix B “Standard Cables”

4. CD-ROM that contains the following folders:

(1) Manual

(2) System Driver

(3) Ethernet Driver

(4) Utility Tools

If any item of above is missing or damaged, please contact your dealer

or retailer from whom you purchased the AW-EM730. Keep the box and

carton when you probably ship or store AW-EM730 in near future. After

you unpack the goods, inspect and make sure the packaging is intact.

Do not plug the power adapter to the main board of AW-EM730 if you

already find it appears damaged.

Note: Keep the AW-EM730 in the original packaging until you start installation.

User’s Manual

1.4 Precautions

Please make sure you properly ground yourself before handling the AW-EM730

board or other system components. Electrostatic discharge can be easily damage

the AW-EM730 board.

Do not remove the anti-static packing until you are ready to install the AW-EM730

board.

Ground yourself before removing any system component from it protective

anti-static packaging. To ground yourself, grasp the expansion slot covers or other

unpainted parts of the computer chassis.

Handle the AW-EM730 board by its edges and avoid touching the components on it.

User’s Manual

1.5 Board Layout

(Rear View)

(Front View)

AW-R031

(Audio Kit) AW-R041

(PowerAdapter Kit)

User’s Manual

1.6 Board Dimension

(Front View)

(Rear View)

User’s Manual

Chapter 2. Connector/Switch Location and Configuration

2.1 Connector/Jumper Location and Definition

User’s Manual

List of Connectors

Connectors Description Connectors Description

CN1 VGA Connector (D-Sub) CN13

CN2 COM1 Connector (D-Sub) CN14 LVDS Connector

CN3 +12V Input CN15 AC97 Connector

CN4 Mini Din CN16 Mini PCI Socket

CN5 CN17 COM2 Pin-Header

CN6 Front Panel Connector CN18 Power Connector

CN7 Inverter Connector CN19 COM3/4 Pin-Header

CN8 USB Connector CN20 IDE Connector

CN9 +5V Fan Connector CN21 LPT Pin-Header

CN10 LAN Connector (RJ45) CN22 Compact Flash Socket

CN11 USB Pin-Header CN23 DDR SO-DIMM

CN12

List of Jumpers

Jumper Description

JP1 Power On/Off Control

JP3 Power Selection for Inverter

JP4 LCD Panel Power Selection

JP5 CMOS Jumper

JP7 RS232/485 Jumper

JP8 RS485 Terminal Jumper

VR1 Adjust the brightness of backlight

JP1 JP3 JP4JP5

JP8JP7

Table des matières

Autres manuels Aewin Ordinateur monocarte

Aewin

Aewin AW-C661 Manuel d'installation et d'exploitation

Aewin

Aewin AW-EM650 Series Manuel utilisateur

Aewin

Aewin AW-P631 Manuel utilisateur

Aewin

Aewin AW-EM751 Series Manuel utilisateur

Aewin

Aewin AW-F703 Manuel utilisateur

Manuels Ordinateur monocarte populaires d'autres marques

WIN Enterprises

WIN Enterprises PL-80910 Manuel utilisateur

AXIOMTEK

AXIOMTEK SBC81206 Series Manuel utilisateur

Embest

Embest SOM-PH8800 Manuel utilisateur

SeaLevel

SeaLevel SBC-R9 Manuel utilisateur

SMART Embedded Computing

SMART Embedded Computing ATCA-8310 Manuel utilisateur

WinSystems

WinSystems PPM-LX800-G Manuel utilisateur

GIGAIPC

GIGAIPC QBiX-PPC Series Manuel utilisateur

OLIMEX

OLIMEX A10S-OLinuXino-MICRO Manuel utilisateur

Commell

Commell FS-978 Manuel utilisateur

GIGAIPC

GIGAIPC QBiP-8665A/ Manuel utilisateur

VersaLogic

VersaLogic Python EBX-11 Manuel utilisateur

Micro Computer Specialists

Micro Computer Specialists IRV-3702 Manuel utilisateur

CompuLab

CompuLab SB-A510 Manuel utilisateur

Boser

Boser HS-7321 Manuel utilisateur

Premier Farnell

Premier Farnell Embest SBC8530 Manuel utilisateur

MicroSys Electronics

MicroSys Electronics miriac SBC-LS1043A2 Manuel utilisateur

Aaeon

Aaeon UP Manuel utilisateur

Portwell

Portwell WUX Series Manuel utilisateur