Aerpro AM9X Manuel utilisateur
Android Auto, Google Play, Android, are registered trademarks of
Google, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Apple, Apple Car Play, Apple iPhone, Apple Music and Siri are registered
trademarks of Apple, Inc.
Android Auto and Apple CarPlay is not owned or controlled by any car manufacturer and are not
responsible for the privacy practices of third parties or the terms and conditions under which they offer
such products. We strongly encourage you to read the Android Auto or Apple CarPlay privacy policies
and terms and conditions to make sure they are acceptable to you.
MULTIMEDIA RECEIVER
Wireless Apple CarPlay & Android AutoTM
USER MANUAL
AM9XAM10X
INCLUSIONS: Head unit, GPS antenna, microphone, wiring harness,
audio-video lead & screws
DISCLAIMER: We recommend using an Authorised Dealer that offers an installation service
to install this product. Never cut or modify a harness as this could damage the head unit and
vehicle, as well as void the warranty of the product.
INTERFACE ICONS
FEATURES
Internal Microphone
Reset
ON / OFF (Hold)
MUTE (Tap)
SiRI / GOOGLE Voice
Volume Increase
Volume Decrease
Home
• Large touchscreen LCD (1024 x 600)
• Works with Apple CarPlay (wireless or wired)
• Supports Android Auto (wireless or wired)
• Built-in Bluetooth (A2DP, AVRCP, HFP, PBAP)
• AM / FM Tuner with RDS & presets (18FM/12AM)
• Reverse camera input (AHD 720P compatible)
• Rear A/V input
• 4V / 5CH RCA Preout
• MP3 / AAC / FLAC / MPEG 1,2,4 Media formats
• Rear USB input (1.5A max charging)
• 8 Band graphic EQ
• 8 EQ Presets
• Time alignment capabilities
• Subwoofer level control
• 40W x 4 Max built-in amplifier
• Shallow 2-DIN chassis mounting design
• Steering wheel control ready
• External microphone included
2
RADIO MODE
To enter Radio Mode, touch “Radio” icon on the Main Menu
Seek down
Home screen/back button
Radio frequency
Seek up
AF and TA settings
Display On/Off
FM Band button
AM Band button
Auto Store button
EQ Mode button
Keypad button
or
or
4 5
7
6
8
12
10
12
11
3
9
11
Auto Tuning
Press the seek icon ( ) on the TFT Monitor screen to increase / decrease the
tuning frequency one step at 0.05MHz increments for FM and 9KHz increments for AM.
Press and hold the seek icon ( ) on the TFT Monitor screen to seek the available
channel by increasing or decreasing the tuning frequency.
FM and AM
Touch the “FM1” or “AM1” on the screen to change among the following bands: FM1,
FM2, FM3 or AM1 and AM2.
Preset Stations
Six(6) stored stations for the current band appear on the screen, touch the preset directly
for use or press the number buttons located on the head unit.
Storing a Station
1. Select a station. (Example: FM1 103.6MHz)
2. Touch and Hold the desired preset number for 3 seconds to store the Radio station.
Recalling a Stored Station
1. Select a Band (If needed).
2. Touch the preset button on which the corresponding radio station is stored or press the
number button on the Radio panel.
3
Preset station list
MEDIA PLAYING MODE
1
6
2
3
4
5
9
This operation allows you to play various compatible formats.
/
10
8
7
11
12
13
14
Touch the icon to return to previous track or press and hold the icon to fast rewind
Touch the icon to play or pause the track
Touch the icon to go to next track or press and hold the icon to fast forward
Touch the end of the progress bar line and drag it left or right to the desired track time
Touch the icon to repeat a folder or track
Touch the icon to activate / deactivate the track in random mode
Touch the icon to show the track list
Touch the icon to display the equalizer settings
Playing track ID3 info (needs media file support)
Touch to go back to previous folder
Touch for music list
Touch for video list
Touch for keypad for quick search
File List
4
BLUETOOTH MODE
7
89
10
1234 556
5555
11
8
When the phone connects to the unit successfully, all of the phone’s Bluetooth enabled
options will be active.
This unit can be paired with 5 mobile phones, but only one can be active at a time.
The unit Bluetooth name is AERPRO
Touch the icon to enter pairing mode
Touch the icon to keypad
Touch to open the phone book
Touch to open the phone interface
Touch the icon to enter Bluetooth music
Touch the icon to enter Bluetooth
settings
Touch to go to connected device screen
Touch “Refresh” to search for bluetooth
devices
Auto connect to your previously paired
bluetooth device
Auto answer for incoming calls
Sync Call logs and Contacts
Microphone gain volume control
> Some mobile phones may not
support the download function.
> Depending on the music player
you are using, streaming may not
be supported.
5
8
12
NOTE: Bluetooth mode can only be accessed when not connected to Android Auto
or Apple Carplay. Press icon to go to connected devices screen.
5
•
•
•
CONNECTED DEVICES SCREEN
Touch the icon to access the connected devices screen
This screen displays paired devices and allows the user to turn Android Auto/Apple Carplay
or other bluetooth features on or off. (If applicable to the device)
2 3 4 5
7
1
6
Paired devices
Apple Carplay activate/deactivate
Android Auto activate/deactivate
Bluetooth calling activate/deactivate
Bluetooth music activate/deactivate
Remove paired device
Add a new compatible device
NOTE: Only one device can be active at any given time
Bluetooth Calling and Bluetooth Music is deactivated on this screen when using
Apple Car Play however Bluetooth Calling and Music work through Apple Car Play
as intended.
Android Auto requires Bluetooth Calling and Bluetooth Music to be connected and
activated for Android Auto to function correctly.
6
SETUP MENU
Setting Options Functions
Date Day / Month / Year Select to adjust calendar date
Time Hour / Minutes
Time 12 Hour / 24 HourTime 12 Hour / 24 Hour
Select to adjust time
Beep On / Off
Car Life
On / Off
•
Setup menu allows you to change the settings within unit, General, Display, Audio and
Others
Touch “General” on the Setup Menu
display for general settings
General
On / OffRadio Region On / Off Select your radio region
Time Format 12 Hour / 24 Hour Choose clock mode 12H/24H
Beep On / Off Activation / Deactivation of touch screen beep
Reverse Lines On / Off
Internal Mic On / Off
Adds reversing lines to the reverse camera
On uses internal Mic / Off uses external Mic
On / OffRight hand Drive On / Off Changes indicator bar to left or right of display
7
SETUP MENU
Setting Options Functions
Equalizer Balance and EQ setting
Subwoofer On / Off
Subwoofer Gain
0 to -10
Heavy bass increases and decreases
Audio
• Touch “Audio” on the Setup Menu
display for audio adjustment settings
-
Loudness
Subwoofer Gain
Reversing volume
Subwoofer
Filter
Time Alignment
On / Off
0 to -10
On / Off / Half
On / Off
-Sub filter settings
Sound boost
Heavy bass increases and decreases
Controls music volume when reversing
Bass switch
Default / Presets / Reset Speaker delay
8
SETUP MENU
Others
Touch “Others” on the Setup Menu
display, then select for information and
factory reset.
Setting Options Functions
- Touch to manually adjust SWC functions
Version - Software version of the radio.
Steering Wheel Controls
Factory Default No / Yes Touch to return to the factory setting
Open Source License - Displays license information
Setting
Options
Functions
Brightness 0 to 20 Touch the desired screen brightness
Dimmer Mode
Auto / Day / Night
Touch the desired screen preset
(Auto changes brightness when headlights on*)
Display
•
•
Touch “Display” on the Setup Menu
display, then select a feature you want
to adjust.
System Version - Software version of the radio
9
* Requires an illumination wire to be present in the vehicle (Usually orange wire in ISO harness needs
to have a connection)
Wired & Wireless CarPlay Operation
Wireless connection
1. Before using Apple CarPlay wirelessly, turn on the Bluetooth and WiFi function on the
compatible device
2. Navigate to the Bluetooth settings on your compatible device and select Aerpro for
pairing
3. A pair message and a pairing request code may appear on your compatible device and
head unit. Click allow to accept
4. Apple CarPlay automatically displays on screen, if not press the home button,
press icon and press the Apple CarPlay icon
10
Wired connection
NOTE: We recommended that the wired connection method be used for new devices.
The park brake needs to be connected for Apple CarPlay to function.
1. Turn on Bluetooth and WiFi on your compatible device
2. Connect an Apple CarPlay compatible device to this unit via USB.
3. A pair message and a pairing request code may appear on your compatible device
and head unit. Click allow to accept
4. An ‘Allow CarPlay with Aerpro while phone is locked’ message may appear on your
device. Click allow to accept
5. Click to enable wireless CarPlay or use USB only option
6. Once connection is enabled for wireless carplay, connection via the USB connection is
no longer required and wireless connection will be automatic
7. The Apple CarPlay automatically displays on screen, if not press the home button,
press icon and press the Apple CarPlay icon
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Aerpro Récepteur de voiture
