Aerotech MX Series Manuel utilisateur
Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | sales@artisantg.com | www.artisantg.com
SM
View
Instra
MX MULTIPLIER BOARD
OPTION MANUAL
P/N: EDO108 (V1.3a)
AEROTECH, Inc. •101 Zeta Drive •Pittsburgh, PA. 15238-2897 •USA
Phone (412) 963-7470 •Fax (412) 963-7459
Product Service: (412) 967-6440; (412) 967-6870 (Fax); (412) 967-6427 (BBS)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
MX Multiplier is a product of Aerotech, Inc.
The MX Multiplier Board Option Manual Revision History:
Rev 1.0 April 24, 1996
Rev 1.1 November 07, 1996
Rev 1.2 June 16, 1997
Rev 1.3 January 26, 1998
Rev 1.3a February 16, 2000
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
MX Multiplier Option Manual Table of Contents
Version 1.3 Aerotech, Inc. iii
TABLE OF CONTENTS
CHAPTER 1: DESCRIPTION AND CONFIGURATION....................................... 1-1
1.1. Introduction........................................................................................ 1-1
1.2. Multiplier Signals............................................................................... 1-2
1.3. Multiplier Board Setup....................................................................... 1-3
1.4. Hardware Configurations.................................................................... 1-3
1.4.1. Fault Circuitry (JP1)........................................................... 1-3
1.4.2. Marker Pulse Jumper (JP4)............................................... 1-3
1.4.3. Pulse Width Jumpers (JP2 & JP3)...................................... 1-4
1.4.4. Test Points............................................................................ 1-5
1.4.5. Connectors (J1 & J2)............................................................ 1-5
1.4.6. Potentiometers...................................................................... 1-7
1.4.7. The RCN Resistor Network ................................................. 1-8
1.5. Output Pulse Clock Speed.................................................................. 1-8
1.6. MX Multiplier Board Specifications................................................ 1-10
1.7. Physical Dimensions......................................................................... 1-11
1.8. Part Number and Ordering Information............................................ 1-11
APPENDIX A: WARRANTY AND FIELD SERVICE POLICY............................A-1
INDEX
∇∇∇
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Table of Contents MX Multiplier Option Manual
iv Aerotech, Inc. Version 1.3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
MX Multiplier Option Manual List of Figures
Version 1.3 Aerotech, Inc. v
LIST OF FIGURES
Figure 1-1. MX Multiplier Board................................................................................. 1-1
Figure 1-2. MX Multiplier Board Configuration ......................................................... 1-2
Figure 1-3. Plot of Input and Output Signals ............................................................... 1-2
Figure 1-4. MX Multiplier Board Hardware Locations ............................................... 1-4
Figure 1-5. MX Encoder Cable Pinouts....................................................................... 1-7
Figure 1-6. RCN Resistor Network.............................................................................. 1-8
Figure 1-7. Count Spacing ........................................................................................... 1-9
Figure 1-8. MX Multiplier Dimensions...................................................................... 1-11
∇∇∇
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
List of Figures MX Multiplier Option Manual
vi Aerotech, Inc. Version 1.3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
MX Multiplier Option Manual List of Tables
Version 1.3 Aerotech, Inc. vii
LIST OF TABLES
Table 1-1. Settings for Pulse Width Jumpers (Rev A and Later)................................. 1-4
Table 1-2. MX Multiplier Board Test Points...............................................................1-5
Table 1-3. Pinouts for Connectors (J1 & J2)................................................................ 1-6
Table 1-4. MX Multiplier Board Potentiometers......................................................... 1-7
Table 1-5. MX Multiplier Board Models and Specifications..................................... 1-10
Table 1-6. MX Multiplier Board and Resistor Network Part Numbers ..................... 1-12
∇∇∇
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
List of Tables MX Multiplier Option Manual
viii Aerotech, Inc. Version 1.3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
MX Multiplier Option Manual Description and Configuration
Version 1.3 Aerotech, Inc.1-1
CHAPTER 1: DESCRIPTION AND CONFIGURATION
In This Section:
•Introduction...................................................... 1-1
•Multiplier Signals............................................. 1-2
•Hardware Configurations ................................. 1-3
•Output Pulse Clock Speed................................ 1-8
•MX Multiplier Board Specifications.............. 1-10
•Physical Dimensions ...................................... 1-11
•Part Number and Ordering Information ......... 1-11
1.1. Introduction
The MX multiplier board is designed to be used with sine wave encoders to increase the
resolution of the encoder. There are four models available in the MX series, each
providing different multiplication factors. Depending on the model, the user can get
times 5, times 10, times 25, and times 50 multiplication. When used with an appropriate
controller, the quadrature of the output signals provides an additional times 4 factor to
yield the effective multiplication of times 20, times 40, times 100, and times 200. An MX
multiplier board is shown in Figure 1-1.
Figure 1-1. MX Multiplier Board
The MX multiplier board connects between the encoder and the appropriate axis
controller. Refer to Figure 1-2 for an example configuration. This connection does not
affect Hall effect or limit signals, it is a simple add-in that uses mostly standard cables.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Ce manuel convient aux modèles suivants
4
Table des matières
Manuels Multiplexeur populaires d'autres marques
ADTRAN
ADTRAN Frameport 768 Manuel utilisateur
Elo TouchSystems
Elo TouchSystems E247 Manuel utilisateur
Paradyne
Paradyne Hotwire 8786 Manuel utilisateur
RFL Electronics
RFL Electronics 9508D UCC Manuel utilisateur
Miranda
Miranda AMX-101i Mode d’emploi
ShipModul
ShipModul MiniPlex-AIX NMEA-0183 Manuel utilisateur
