3
General information
1. Suspended air handling units are manufactured in accordance with the Ukrainian and European
technical standards and regulations.
2. Skystar units must be installed and used only in accordance with this documentation.
3. For damage caused by improper use of the equipment, the manufacturer is not responsible, the
entire risk of the equipment accepts the buyer.
4. The installation and operating documentation must be available to maintenance personnel and
service organization. It is recommended to place it near the installation of ventilation and air-
conditioning.
5. When handling, installation, electrical connection, commissioning, and repair and maintenance of
equipment, you must follow applicable safety rules, regulations and generally accepted technical
rules. First of all, it is necessary to use personal protective equipment (gloves) because the
installation contains sharp edges and corners. All connected equipment must comply with
current standards and safety regulations.
6. Replacement and repair of individual system components, which could affect the safety and proper
operation of the equipment is strictly prohibited.
7. It is strongly recommended to read and strictly observe the instructions and recommendations
provided in the following sections before installation and use .
8. Installation and commissioning of the equipment in operation can only be carried out staff
specialized firm having approval from the manufacturer according to the applicable rules and
regulations.
9. Properly designed and installed ventilation system will not give effect, if it is not for the proper care.
10. After the installation , ventilation system must be checked, adjusted in accordance with the project
and in a totally proper and prepared for the operation of state commissioned to service personnel.
11. When checking must verify that the actual performance of the fan, heat output heaters specified in
the project
Note!
-The design of installations may be amended, without impairing its consumer
properties and not addressed in this guide.
Application and operating conditions
SkyStar units are designed for comfort ventilation and air conditioning in small spaces.
Available in various sizes in the flow range from 500 to 4700 m3/h,maximum fan pressure up
to 1000 Pa. The design is identical to the settings at their internal and external use. SkyStar
units are designed to supply air without solid, fibrous, sticky, aggressive, respectively
explosive impurities. The air must not contain substances that contribute to corrosion or
decomposition of zinc, steel or aluminum. Operating temperature range in the standard
version from -30 ° C to + 40 ° C.
