Neither the software nor the documentation may
be used for real aviation and training purposes. 01<09
page
DA20-100 ‘Katana’ 4X Manual
1.4.2 SETTINGS OPERATION MODE
The aircraft can be operated in three different
modes to fit the different needs of virtual
aviatiors. Some special features will only be
availableinRealisticModeto rewardtheuser
willingtomeetthechallenge.
Simple does not mean that the Katana will
behave like the default aircraft. The systems
need to be operated correctly but there will be
nodamagesandnowear.
The operation mode can be switched for one
flight by a left click or permanently with a right
click. Only one selection is possible without
reloadingorchangingtheaircraft.
The aircraft has to be operated with care and
should be maintained. Damages and wear
may occur and will be stored with other data.
Specialfeaturesareenabled.
Realistic
Simple
Instructor
The aircraft is brand new every time when
loaded. No damages and wear, no special
features.Nodatastored.
The aircraft is brand new every time when
loaded. Damages and wear can occur but will
not be stored. Systems can be influenced with
aspecialuserinterface.
REALISTIC (Default)
Maloperation has consequences.
Wear and damage are simulated.
Aircraft needs maintenance.
INSTRUCTOR
Aircraft is as new every flight.
No wear and damage but
systems need correct handling.
SIMPLE
Aircraft is loaded without damage.
Wear and damage are simulated.
System failures can be triggered.
OPERATION MODE
INTRODUCTION AND DESCRIPTION
NOTE:
!All damage and wear simulation within the Katana should be
considered as effects aside the FSX crash detection. A FSX crash
eventwillnotinfluencetheKatanassystemsasthiswouldmeana
completelydestroyedaircraft.
