Aeroflex 3550 Manuel utilisateur

Communications

Test Set

3550 / 3550R

RCI Manual

Issue-8

EXPORT CONTROL WARNING: This document contains controlled technical data under the

jurisdiction of the Export Administration Regulations (EAR), 15 CFR 730-774. It cannot be

transferred to any foreign third party without the specific prior approval of the U.S. Department of

Commerce, Bureau of Industry and Security (BIS). Violations of these regulations are punishable

by fine, imprisonment, or both.

All manuals and user guides at all-guides.com

all-guides.com

Subject to Export Control, see Cover Page for details.

RCI MANUAL

COMMUNICATIONS TEST SET

3550 / 3550R

PUBLISHED BY

Aeroflex

transmitted in any form or by any means, electronic, mechanical, photocopying, recording or

otherwise without the prior permission of the publisher.

Original Printing Mar 2013

Issue-2 Aug 2013

Issue-3 Sep 2013

Issue-4 Apr 2014

Issue-5 Oct 2014

Issue-6 Feb 2015

Issue-7 May 2015

Issue-8 Jan 2016

10200 West York / Wichita, Kansas 67215 U.S.A. / (316) 522-4981 / FAX (316) 524-2623

All manuals and user guides at all-guides.com

Subject to Export Control, see Cover Page for details.

Electromagnetic Compatibility:

For continued EMC compliance, all external cables must be shielded and three meters or less in

length.

Nomenclature Statement:

In this manual, 3550 / 3550R, Test Set or Unit refers to the 3550 / 3550R Communications Test Set.

Product Warranty:

Refer to http://ats.aeroflex.com/about-us/quality/standard-hardware-warranty for the Product

Warranty information.

All manuals and user guides at all-guides.com

Subject to Export Control, see Cover Page for details.

THIS PAGE INTENTIONALLY LEFT BLANK.

All manuals and user guides at all-guides.com

Subject to Export Control, see Cover Page for details.

SAFETY FIRST: TO ALL OPERATIONS PERSONNEL

REFER ALL SERVICING OF UNIT TO QUALIFIED TECHNICAL PERSONNEL. THIS UNIT CONTAINS NO

OPERATOR SERVICEABLE PARTS.

WARNING: USING THIS EQUIPMENT IN A MANNER NOT SPECIFIED BY THE ACCOMPANYING

DOCUMENTATION MAY IMPAIR THE SAFETY PROTECTION PROVIDED BY THE EQUIPMENT.

CASE, COVER OR PANEL REMOVAL

Opening the Case Assembly exposes the operator to electrical hazards that can result in electrical shock or

equipment damage. Do not operate this Test Set with the Case Assembly open.

SAFETY IDENTIFICATION IN TECHNICAL MANUAL

This manual uses the following terms to draw attention to possible safety hazards, that may exist when

operating or servicing this equipment.

CAUTION: THIS TERM IDENTIFIES CONDITIONS OR ACTIVITIES THAT, IF IGNORED, CAN RESULT IN

EQUIPMENT OR PROPERTY DAMAGE (E.G., FIRE).

WARNING: THIS TERM IDENTIFIES CONDITIONS OR ACTIVITIES THAT, IF IGNORED, CAN RESULT IN

PERSONAL INJURY OR DEATH.

SAFETY SYMBOLS IN MANUALS AND ON UNITS

CAUTION: Refer to accompanying documents. (This symbol refers to specific CAUTIONS

represented on the unit and clarified in the text.)

AC OR DC TERMINAL: Terminal that may supply or be supplied with AC or DC voltage.

DC TERMINAL: Terminal that may supply or be supplied with DC voltage.

AC TERMINAL: Terminal that may supply or be supplied with AC or alternating voltage.

EQUIPMENT GROUNDING PRECAUTION

Improper grounding of equipment can result in electrical shock.

USE OF PROBES

Check the specifications for the maximum voltage, current and power ratings of any connector on the Test Set

before connecting it with a probe from a terminal device. Be sure the terminal device performs within these

specifications before using it for measurement, to prevent electrical shock or damage to the equipment.

POWER CORDS

Power cords must not be frayed, broken nor expose bare wiring when operating this equipment.

USE RECOMMENDED FUSES ONLY

Use only fuses specifically recommended for the equipment at the specified current and voltage ratings.

INTENDED USE

The 3550 is intended for indoor use only and should not be subjected to conditions which cause water or other

liquids to collect on the Touch Screen Display.

The 3550R is intended for use in both indoor and outdoor environments and remains functional in typical rain

conditions.

INTERNAL BATTERY

This unit contains a Lithium Ion Battery, serviceable only by a qualified technician.

CAUTION: SIGNAL GENERATORS CAN BE A SOURCE OF ELECTROMAGNETIC INTERFERENCE (EMI) TO

COMMUNICATION RECEIVERS. SOME TRANSMITTED SIGNALS CAN CAUSE DISRUPTION AND

INTERFERENCE TO COMMUNICATION SERVICES OUT TO A DISTANCE OF SEVERAL MILES.

USERS OF THIS EQUIPMENT SHOULD SCRUTINIZE ANY OPERATION THAT RESULTS IN

RADIATION OF A SIGNAL (DIRECTLY OR INDIRECTLY) AND SHOULD TAKE NECESSARY

PRECAUTIONS TO AVOID POTENTIAL COMMUNICATION INTERFERENCE PROBLEMS.

All manuals and user guides at all-guides.com

Subject to Export Control, see Cover Page for details.

THIS PAGE INTENTIONALLY LEFT BLANK.

All manuals and user guides at all-guides.com

all-guides.com

PREFACE

Subject to Export Control, see Cover Page for details. i

SCOPE

This Manual contains Instructions for operating the 3550 / 3550R through a remote interface. It is

strongly recommended that the programmer be thoroughly familiar with the operational functions of

the Unit and this manual before attempting to remotely configure the 3550 / 3550R.

ORGANIZATION

The Manual is composed of the following Chapters:

CHAPTER 1 - REMOTE OPERATION CONFIGURATION

Describes how to configure the 3550 / 3550R for remote operation.

CHAPTER 2 - REMOTE OPERATION COMMANDS

Identifies and explains the Remote Operation commands.

All manuals and user guides at all-guides.com

TABLE OF CONTENTS

ii Subject to Export Control, see Cover Page for details.

PARAGRAPH PAGE

CHAPTER 1 - REMOTE OPERATION CONFIGURATION

1-1 General ...................................................................................................... 1-1

1-3 Remote Operation Configuration.................................................................... 1-1

CHAPTER 2 - REMOTE OPERATION COMMANDS

2-1 General ...................................................................................................... 2-1

2-2 Remote Operation Commands ....................................................................... 2-1

AF Counter ............................................................................................. 2-2

AGC....................................................................................................... 2-4

Audio Level Meter.................................................................................... 2-5

C4FSK ................................................................................................... 2-9

Calibration.............................................................................................. 2-25

DCS....................................................................................................... 2-26

Demod ................................................................................................... 2-27

Deviation Meter / Modulation Meter ........................................................... 2-28

Distortion Meter ...................................................................................... 2-31

External Audio Input ................................................................................ 2-34

External Audio Output.............................................................................. 2-35

External RF Power................................................................................... 2-36

Frequency Find ....................................................................................... 2-41

Frequency List ........................................................................................ 2-42

Function Generator.................................................................................. 2-43

Normalize............................................................................................... 2-44

Options .................................................................................................. 2-45

Oscilloscope ........................................................................................... 2-46

Receiver................................................................................................. 2-49

RF Error Meter........................................................................................ 2-50

RF Generator.......................................................................................... 2-52

RF Power Meter ...................................................................................... 2-54

RSSI Meter............................................................................................. 2-58

Screens.................................................................................................. 2-61

Scripting................................................................................................. 2-63

Setup..................................................................................................... 2-66

Signaling................................................................................................ 2-68

Sinad Meter ............................................................................................ 2-77

Speaker.................................................................................................. 2-80

Spectrum Analyzer................................................................................... 2-81

Tracking Generator.................................................................................. 2-84

Upconverter............................................................................................ 2-86

All manuals and user guides at all-guides.com

CHAPTER 1 - REMOTE OPERATION CONFIGURATION

Subject to Export Control, see Cover Page for details. 1-1

1-1. GENERAL

The 3550 / 3550R can be controlled through a serial interface.

1-2. REMOTE OPERATION CONFIGURATION

The 3500 / 3500A can be configured for remote operation using an Ethernet connection.

This is an example configuration for a static address on the PC

utilizing an Ethernet Crossover Cable.

1. On the PC, select the Internet Protocol (TCP/IP). Select ‘Properties.’

All manuals and user guides at all-guides.com

1-2 Subject to Export Control, see Cover Page for details.

2-2. REMOTE OPERATION CONFIGURATION (cont)

2. Select ‘Use the following IP address’ and set the IP Address to “ 10 10 10 1 ” and the

Subnet Mask to “ 255 255 255 0.” Select “OK.”

3. Connect Ethernet Crossover Cable to the 3550 / 3550R ETHERNET Connector and the

Ethernet Connector on the PC.

Ethernet Crossover Cable

All manuals and user guides at all-guides.com

Autres manuels pour 3550

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Aeroflex Équipement de test

Aeroflex

Aeroflex ATC-600A-2 Manuel utilisateur

Aeroflex

Aeroflex IFR 4000 Manuel

Aeroflex

Aeroflex IFR 6000 Manuel de la liste des pièces

Aeroflex

Aeroflex IFR 4000 Manuel de la liste des pièces

Aeroflex

Aeroflex IFR 4000 Manuel utilisateur

Aeroflex

Aeroflex ATC-600A-2 Manuel utilisateur

Aeroflex

Aeroflex 3500 Manuel utilisateur

Aeroflex

Aeroflex PSD60-2R Manuel utilisateur

Aeroflex

Aeroflex RGS-2000NG Manuel utilisateur

Aeroflex

Aeroflex IFR 6000 Manuel utilisateur

Aeroflex

Aeroflex IFR 4000 Manuel utilisateur

Aeroflex

Aeroflex 3900 Series Manuel du propriétaire

Aeroflex

Aeroflex PSD60-2R Manuel utilisateur

Aeroflex

Aeroflex IFR 4000 Manuel utilisateur

Aeroflex

Aeroflex 3500 Manuel utilisateur

Aeroflex

Aeroflex ProLock 2201 Manuel de la liste des pièces

Aeroflex

Aeroflex ATC-601-2 Manuel utilisateur

Aeroflex

Aeroflex 3550 Manuel de la liste des pièces

Aeroflex

Aeroflex 3550 Manuel utilisateur

Aeroflex

Aeroflex 8800 Series Manuel de la liste des pièces

Aeroflex

Aeroflex GPSG-1000 Instructions d'installation et d'utilisation

Aeroflex

Aeroflex ATC-600A-2 Manuel utilisateur

Aeroflex

Aeroflex IFR 6000 Manuel utilisateur

Aeroflex

Aeroflex RGS-2000NG Manuel de la liste des pièces

Manuels Équipement de test populaires d'autres marques

SMART

SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Agilent Technologies

Agilent Technologies BERT Serial Manuel utilisateur

Agilent Technologies

Agilent Technologies N3280A Manuel utilisateur

Vernier

Vernier Go Direct Voltage Manuel utilisateur

Lifeloc

Lifeloc R.A.D.A.R. Manuel utilisateur

Fluke

Fluke T5-600 Instructions d'utilisation et d'installation

Mercury

Mercury TSL01 Manuel utilisateur

MAHA

MAHA MBT Series Manuel utilisateur

Fuji Electric

Fuji Electric P-61 Manuel utilisateur

ETC

ETC SealerAtor Manuel utilisateur

Skyfine

Skyfine ETHYWAY V2 Manuel utilisateur

Appion

Appion G5 Twin Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuel utilisateur

BW Technologies

BW Technologies MicroDock II Manuel utilisateur

Sun Nuclear

Sun Nuclear 1027 Manuel utilisateur

Biomark

Biomark HPR LITE READER Manuel utilisateur

Hioki

Hioki 3169-20 Manuel utilisateur

Ashcroft

Ashcroft ATE-100 Manuel utilisateur