AERODYNE SYSTEMS - PO BOX 1616 VERULAM 4340 SOUTH AFRICA
Read the warning on page 3 of this manual and follow the instructions before packing and/or using the product.
2 OPERATING INSTRUCTIONS
2.1 ASSEMBLY
INSPECTION BEFORE PACKING
1. Read and understand this manual and be qualified by proper instruction for sport parachuting
activities.
2. Check both 3-Ring releases to see that they are correctly assembled, and the release handle is
securely velcroed to the main lift web.
3. Check the main container closure for the correct pin position and the correct routing of the bridle.
4. Check the reserve container for correct pin closure and routing of the ripcord. Be sure the reserve
ripcord handle is well seated in its velcro pocket.
5. The main pilot chute must be protected by its pouch, but the handle must be easily visible
and accessible
6. Ensure that the reserve and main canopy size is compatible with the harness-container and
deployment system with which it is to be used.
7. Prior to assembly and/or packing a thorough inspection of the Icon harness and container must
be completed.
- Reserve container
- Main container
- Harness
- All cable housings
- All stitching
- All grommets
- Reserve handle integrity and correct size fitted.
- Cut away housing integrity and correct size fitted.
- Reserve risers and deployment brake system
Take note of any worn, damaged, corroded or incorrectly rigged components, which must be
repaired or replaced before the harness container is packed for use.
For Reserve canopy installation ,read and follow the instructions included in theReserve canopy
instruction manual.
ICON PACKING MANUAL Edition of 02-2004
Page 10/34
