Advantech TREK-668 Manuel utilisateur

User Manual

TREK-668/TREK-303

In-Vehicle Hybrid MDT/

Surveillance Smart Display

TREK-668/303 User Manual ii

The documentation and the software included with this product are copyrighted 2013

by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right

to make improvements in the products described in this manual at any time without

notice. No part of this manual may be reproduced, copied, translated or transmitted

in any form or by any means without the prior written permission of Advantech Co.,

Ltd. Information provided in this manual is intended to be accurate and reliable. How-

ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-

ments of the rights of third parties, which may result from its use.

Acknowledgements

TI and AM37x are trademarks of Texas Instruments..

Microsoft Windows and MS-DOS is registered trademarks of Microsoft Corp.

All other product names or trademarks are properties of their respective owners.

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its products will be

free from defects in materials and workmanship for two years from the date of pur-

chase.

This warranty does not apply to any products which have been repaired or altered by

persons other than repair personnel authorized by Advantech, or which have been

subject to misuse, abuse, accident or improper installation. Advantech assumes no

liability under the terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous testing, most of

our customers never need to use our repair service. If an Advantech product is defec-

tive, it will be repaired or replaced at no charge during the warranty period. For out-

of-warranty repairs, you will be billed according to the cost of replacement materials,

service time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For example, CPU

speed, Advantech products used, other hardware and software used, etc.) Note

anything abnormal and list any onscreen messages you get when the problem

occurs.

2. Call your dealer and describe the problem. Please have your manual, product,

and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return merchandize

authorization) number from your dealer. This allows us to process your return

more quickly.

4. Carefully pack the defective product, a fully-completed Repair and Replacement

Order Card and a photocopy proof of purchase date (such as your sales receipt)

in a shippable container. A product returned without proof of the purchase date

is not eligible for warranty service.

5. Write the RMA number visibly on the outside of the package and ship it prepaid

to your dealer.

Part No. Edition 1

Printed in Taiwan February 2013

iii TREK-668/303 User Manual

Declaration of Conformity

This product has passed the CE test for environmental specifications. Test conditions

for passing included the equipment being operated within an industrial enclosure. In

order to protect the product from being damaged by ESD (Electrostatic Discharge)

and EMI leakage, we strongly recommend the use of CE-compliant industrial enclo-

sure products.

FCC Class B

Note: This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installa-

tion. This equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful inter-

ference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interfer-

ence to radio or television reception, which can be determined by turning the equip-

ment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Technical Support and Assistance

1. Visit the Advantech web siteat http://support.advantech.com where you can find

the latest information about the product.

2. Contact your distributor, sales representative, or Advantech's customer service

center for technical support if you need additional assistance. Please have the

following information ready before you call:

–Product name and serial number

–Description of your peripheral attachments

–Description of your software (operating system, version, application software,

etc.)

–A complete description of the problem

–The exact wording of any error messages

TREK-668/303 User Manual iv

Warnings, Cautions and Notes

Document Feedback

To assist us in making improvements to this manual, we would welcome comments

and constructive criticism. Please send all such - in writing to: support@advan-

tech.com

Packing List

Before setting up the system, check that the items listed below are included and in

good condition. If any item does not accord with the table, please contact your dealer

immediately.

TREK-668 series In-Vehicle Hybrid MDT/Surveillance Computing Box

USB/Audio cable clip

Warranty card

Power cord: DC power inlet cable (180 cm - for TREK-668 only)

Video in/CAN cable

"Drivers, Utilities and User Manual" CD-ROM

End User License Agreement (XPE and WinCE model), please download driver

and related document from http://support.advantech.com

Warning! Warnings indicate conditions, which if not observed, can cause personal

injury!

Caution! Cautions are included to help you avoid damaging hardware or losing

data. e.g.

There is a danger of a new battery exploding if it is incorrectly installed.

Do not attempt to recharge, force open, or heat the battery. Replace the

battery only with the same or equivalent type recommended by the man-

ufacturer. Discard used batteries according to the manufacturer's

instructions.

Note! Notes provide optional additional information.

v TREK-668/303 User Manual

Ordering Information

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Use a damp

cloth. Do not use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near the equip-

ment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting

it fall may cause damage.

7. Do not leave this equipment in an environment unconditioned where the storage

temperature under -30° C (-22° F) or above 70° C (158° F), it may damage the

equipment. Operating temperature: 50° C

8. The openings on the enclosure are for air convection. Protect the equipment

from overheating. DO NOT COVER THE OPENINGS.

9. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

10. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.The voltage and current rating of the cord should be greater

than the voltage and current rating marked on the product.

11. All cautions and warnings on the equipment should be noted.

12. If the equipment is not used for a long time, disconnect it from the power source

to avoid damage by transient overvoltage.

13. Never pour any liquid into an opening. This may cause fire or electrical shock.

14. Never open the equipment. For safety reasons, the equipment should be

opened only by qualified service personnel.

15. If one of the following situations arises, get the equipment checked by service

personnel:

The power cord or plug is damaged.

Liquid has penetrated into the equipment.

The equipment has been exposed to moisture.

The equipment does not work well, or you cannot get it to work according to

the user's manual.

The equipment has been dropped and damaged.

The equipment has obvious signs of breakage.

P/N Description

TREK-668-GWB7A0E Intel Atom N2600 1.6 Ghz, GPS, GPRS,Wlan,BT, 16G CF, Win7

TREK-668-GHB7A0E Intel Atom N2600 1.6 Ghz , GPS, HSDPA,BT,16G CF, Win7

TREK-668-00A0E Intel Atom N2600 1.6 Ghz, Barebone

TREK-303D-HA0E 7" vehicle display system, 800 x 480 resolution, with 4 wire resis-

tive touch screen, 2-watts speaker x 2

1700018342 2-meter Cable

TREK-668/303 User Manual vi

16. CAUTION: The computer is provided with a battery-powered real-time clock cir-

cuit. There is a danger of explosion if battery is incorrectly replaced. Replace

only with same or equivalent type recommended by the manufacture. Discard

used batteries according to the manufacturers instructions.

17. THE COMPUTER IS PROVIDED WITH CD DRIVES COMPLY WITH APPRO-

PRIATE SAFETY STANDARDS INCLUDING IEC 60825.

18. This device complies with Part 15 of the FCC rules. Operation is subject to the

following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

19. CAUTION: Always completely disconnect the power cord from your chassis

whenever you work with the hardware. Do not make connections while the

power is on. Sensitive electronic components can be damaged by sudden

power surges.

20. CAUTION: Always ground yourself to remove any static charge before touching

the motherboard, backplane, or add-on cards. Modern electronic devices are

very sensitive to static electric charges. As a safety precaution, use a grounding

wrist strap at all times. Place all electronic components on a static-dissipative

surface or in a static-shielded bag when they are not in the chassis.

21. CAUTION: Any unverified component could cause unexpected damage. To

ensure the correct installation, please always use the components (ex. screws)

provided with the accessory box.

22. Caution text concerning lithium batteries:

23. "Rack Mount Instructions - The following or similar rack-mount instructions are

included with the installation instructions:

A) Elevated Operating Ambient - If installed in a closed or multi-unit rack

assembly, the operating ambient temperature of the rack environment may be

greater than room ambient. Therefore, consideration should be given to install-

ing the equipment in an environment compatible with the maximum ambient

temperature (Tma) specified by the manufacturer.

B) Reduced Air Flow - Installation of the equipment in a rack should be such that

the amount of air flow required for safe operation of the equipment is not com-

promised.

C) Mechanical Loading - Mounting of the equipment in the rack should be such

that a hazardous condition is not achieved due to uneven mechanical loading.

D) Circuit Overloading - Consideration should be given to the connection of the

equipment to the supply circuit and the effect that overloading of the circuits

vii TREK-668/303 User Manual

might have on over current protection and supply wiring. Appropriate consider-

ation of equipment nameplate ratings should be used when addressing this con-

cern.

E) Reliable Earthing - Reliable earthing of rack-mounted equipment should be

maintained. Particular attention should be given to supply connections other

than direct connections to the branch circuit (e.g. use of power strips)."

Safety Precaution - Static Electricity

Follow these simple precautions to protect yourself from harm and the products from

damage.

To avoid electrical shock, always disconnect the power from your system chas-

sis before you work on it. Don't touch any components on the main board or

other cards while the system is on.

Disconnect power before making any configuration changes. The sudden rush

of power as you connect a jumper or install a card may damage sensitive elec-

tronic components.

European Contact Information:

Advantech Europe GmbH Kolberger Straße 7

D-40599 Düsseldorf, Germany

Tel: 49-211-97477350

Fax: 49-211-97477300

Warning! 1. Input voltage rated: 9 ~36 Vdc.

2. Transport: carry the unit with both hands and handle with care.

3. Maintenance: to properly maintain and clean the surfaces, use only

approved products or clean with a dry applicator.

4. CompactFlash: Turn off the power before inserting or removing

CompactFlash storage cards.

TREK-668/303 User Manual viii

ix TREK-668/303 User Manual

Contents

Chapter 1 General Information ............................1

1.1 Introduction ...............................................................................................2

1.2 General Specifications ..............................................................................3

1.3 Dimensions ...............................................................................................4

Figure 1.1 TREK-668dimensions.................................................4

Chapter 2 System Setup.......................................5

2.1 A Quick Tour of the TREK-668 Computing Box........................................6

Figure 2.1 Front view of TREK-668.............................................6

Figure 2.2 Rear view of TREK-668..............................................6

Figure 2.3 Side view of TREK-668 ..............................................6

Figure 2.4 Bottom view of TREK-668..........................................6

Figure 2.5 Top view of TREK-668 ...............................................7

2.2 Installation Procedures..............................................................................7

2.2.1 Connecting the Power Cord..........................................................7

Table 2.1: Pin Definition of Power Cord ......................................7

2.2.2 Power Connector (12/24V; 9 ~ 32V).............................................8

Table 2.2: Power Connector........................................................8

Figure 2.6 Power connector photo..............................................8

2.3 Running the BIOS Setup Program............................................................9

2.4 Installing the Drivers for Win XP ...............................................................9

Chapter 3 Hardware & Peripheral Installation..11

3.1 Overview of Hardware Installation & Upgrading .....................................12

3.2 Installing the Storage Device and Memory .............................................12

3.3 Installing Optional Accessories...............................................................12

3.3.1 Installing TREK-668 Peripheral Modules....................................12

Figure 3.1 Install peripheral in the system.................................12

3.3.2 Installing the MiniPCI Type WWAN, SIM, WLAN, CF Card, SIM

Card and HDD ............................................................................13

Figure 3.2 Mini PCI type WWAN module view ..........................13

3.3.3 Installing CF Card.......................................................................13

Figure 3.3 Installing CF Card.....................................................13

Figure 3.4 Install USB cable clip................................................13

3.3.4 GPS Module................................................................................14

3.4 Paired with TREK-303 Specifications .....................................................14

Chapter 4 Jumper Settings and.........................15

Chapter 4 Connectors.........................................15

4.1 Setting Jumpers and Switches................................................................16

4.1.1 Locations of the Jumpers and Connector...................................16

Figure 4.1 Locations of jumpers and connectors on top side the

motherboard.............................................................16

Figure 4.2 Locations of jumpers andconnectors on bottom side of

the motherboard.......................................................17

4.1.2 Jumpers......................................................................................17

TREK-668/303 User Manual x

Table 4.1: Jumpers on Motherboard......................................... 17

4.1.3 Connectors ................................................................................. 17

Table 4.2: Connectors on Motherboard..................................... 17

4.2 Jumper Settings...................................................................................... 18

4.2.1 CMOS Clear for External RTC (J1) ............................................ 18

Table 4.3: Clear CMOS / External RTC (JP1).......................... 18

4.2.2 CAN bus termination selection (CN16)....................................... 18

Table 4.4: CAN bus termination selection (CN16) ................... 18

4.2.3 Pin 9 of COM9 Function Selection (CN20)................................. 19

Table 4.5: Pin 9 of COM9 Function Selection (CN20).............. 19

Table 4.6: ................................................................................. 19

4.2.4 Mini-PCIe Socket Function Selection (SW2).............................. 19

Table 4.7: Mini-PCIe Socket Function Selection (SW2)............ 19

4.2.5 Mini-PCIe Socket Voltage Adjustment Level (SW3)................... 19

Table 4.8: Mini-PCIe Socket Function Selection (SW3)............ 19

4.2.6 WWAN Socket Voltage Adjustment Level (SW4)....................... 19

Table 4.9: Mini-PCIe Socket Function Selection (SW4)............ 19

4.2.7 COM Port Interface..................................................................... 20

Table 4.10:Serial Port Function.................................................. 20

Table 4.11:Serial Port Settings................................................... 20

Chapter 5 Pin Assignments...............................21

5.1 Front Side Connectors............................................................................ 22

5.2 Rear Side Connectors............................................................................. 22

5.3 LED Indicator .......................................................................................... 22

5.4 Power Connector (12/24V; 9 ~ 32V)....................................................... 23

Table 5.1: Power Connector...................................................... 23

5.5 CAN/J1708 Connector............................................................................ 24

Table 5.2: CAN/J1708 Connector ............................................. 24

5.6 CAN / Video-In Connector ...................................................................... 24

Table 5.3: CAN / Video-In Connector........................................ 24

5.7 HDC (High Density Connector) (CN27) .................................................. 25

Table 5.4: High Density Connector ........................................... 25

5.8 Smart Display Connector........................................................................ 26

Table 5.5: Smart Display Connector ......................................... 26

5.9 VGA & RS-232 Connector (CN24).......................................................... 27

Table 5.6: RS232 Connector(COM9)........................................ 27

Table 5.7: VGA Connector........................................................ 27

5.10 Video Input Connector (CN25)................................................................ 28

Table 5.8: Video Input Connector 1........................................... 28

Table 5.9: Video Input Connector 2........................................... 29

5.11 Back USB Connector (CN23) ................................................................. 29

Table 5.10:USB Connector ........................................................ 29

5.12 Front USB Connector (CN21)................................................................. 30

Table 5.11:USB Connector ........................................................ 30

Chapter 6 Software Demo Utility.......................31

Chapter 6 Setup..................................................31

6.1 Introduction............................................................................................. 32

6.1.1 Execute J1939 Demo Utility........................................................ 32

Figure 6.1 IMC demo utility........................................................ 32

Figure 6.2 J1939 test - 1............................................................ 33

Figure 6.3 J1939 test - 2............................................................ 33

6.1.2 Execute CAN Demo Utility.......................................................... 34

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Advantech Système de sécurité

Advantech

Advantech TREK-60 Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur