Advantech CompactPCI MIC-3021/8 Manuel utilisateur
MIC-3021/8
6U/7U
CompactPCI ® Industrial
Computer for Rackmounting
MIC-3021/8 User's Manual
Part No. 2003302100 1st Edition
Printed in Taiwan April 1999
Copyright Notice
This document is copyrighted, 1999. All rights are reserved. The
original manufacturer reserves the right to make improvements to the
products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the original
manufacturer assumes no responsibility for its use, nor for any
infringements upon the rights of third parties which may result from its
use.
Acknowledgements
PICMG, CompactPCI and the PICMG, CompactPCI logos are
trademarks of the PCI Industrial Computers Manufacturers Group
All other product names or trademarks are properties of their
respective owners.
Preface and Table of Contents
Product warranty
Advantech warrants to you, the original purchaser, that each of its
products will be free from defects in materials and workmanship for
one year from the date of purchase.
This warranty does not apply to any products which have been
repaired or altered by persons other than repair personnel authorized
by Advantech, or which have been subject to misuse, abuse, accident
or improper installation. Advantech assumes no liability under the
terms of this warranty as a consequence of such events.
Because of Advantechs high quality-control standards and rigorous
testing, most of our customers never need to use our repair service. If
an Advantech product is defective, it will be repaired or replaced at no
charge during the warranty period. For out-of-warranty repairs, you
will be billed according to the cost of replacement materials, service
time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For
example, CPU speed, Advantech products used, other hardware
and software used, etc.) Note anything abnormal and list any on-
screen messages you get when the problem occurs.
2. Call your dealer and describe the problem. Please have your
manual, product, and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return
merchandize authorization) number from your dealer. This allows us
to process your return more quickly.
4. Carefully pack the defective product, a fully-completed Repair and
Replacement Order Card and a photocopy proof of purchase date
(such as your sales receipt) in a shippable container. A product
returned without proof of the purchase date is not eligible for
warranty service.
5. Write the RMA number visibly on the outside of the package and
ship it prepaid to your dealer.
MIC-3021/8 User's Manual
Packing List
Before installing your board, ensure that the following materials have
been received:
1 MIC-3021/8 Compact PCI enclosure with backplane
1 box of accessories
1 warranty certificate
This user's manual
If any of these items are missing or damaged, contact your distributor
or sales representative immediately.
Technical Support and Sales Assistance
If you have any technical questions about the MIC-3021/8 or any
other Advantech products, please visit our support website at:
http://support.advantech.com.tw
For more information about Advantech's products and sales informa-
tion, please visit:
http://www.advantech.com
Preface and Table of Contents
Contents
Chapter 1: General Information ..................... 7
1.1 Introduction ...................................................................... 8
1.2 Features ............................................................................ 9
1.3 Specifications .................................................................... 9
1.4 Dimensions ..................................................................... 11
Chapter 2: Installation ...................................13
2.1 Initial inspection ............................................................. 1 4
2.2 The MIC-3021/8 Chassis ............................................. 1 5
2.3 Installation Procedures ................................................. 1 7
2.3.1 Card Installation and Removal ............................ 1 7
2.3.2 Before Operating the System .............................. 1 9
2.3.3 Installing Peripherals ............................................ 2 0
2.3.4 Replacing the Fan Tray and Air Filter ................ 2 2
MIC-3021/8 User's Manual
Figures
Figure 1-1: MIC-3021/8 dimensions .......................................... 11
Figure 2-1: Front view of MIC-3021/8 ...................................... 1 5
Figure 2-2: Rear view of MIC-3021/8 ....................................... 1 6
Figure 2-3: Installing a card into the chassis ........................... 1 8
Figure 2-4: Install a device on the top tray .............................. 2 0
Figure 2-5: Attaching the mounting brackets to a 5.25" device
.................................................................................... 2 1
Figure 2-6: Attaching mounting brackets to a half-height
device for mounting in device space next to the fan
tray module ............................................................... 2 2
Chapter 1 General Information 7
1
General Information
CHAPTER
8MIC-3021/8 User's Manual
1.1 Introduction
The MIC-3021/8 is an 8-slot 6U/7U-sized CompactPCI enclosure for
rack or panel mounting. It has eight 6U card slots, and has a device
bay which can accommodate devices and peripherals such as floppy
disk drives and hard disk drives. Its rugged construction and flexible
modular design allows users to configure it to meet the requirements
of individual applications.
The MIC-3021/8 comes in two versions: 6U high without a fan tray or
7U high with a fan tray. The 1U high fan module provides forced air
cooling in the system. Two 88-CFM high-speed fans are mounted in a
hot-swappable tray directly underneath the card slots. The fan's
tachometer output enables the alarm module to monitor the speed of
the fans. Tachometer signals are transmitted to the system through a
6-pin connector on the fan backplane. A protective circuit has been
designed into the fan backplane to reduce electrical spikes and noise
while hot swapping. This design allows users to replace fans safely
without turning the system off. The 7U high design also provides an
additional space beneath the device bay to install a 5.25" device.
The device bay itself accommodates up to five 5.25" or 3.5" devices, or
three devices when an ATX power supply unit is installed. It accepts
standard HDDs and FDDs; there is no need for expensive special
devices. Devices can be removed through the device bay front without
the need for disassembling the enclosure, providing the shortest
MTTR for device replacement. A lockable door prevents unauthorized
access to the devices and to the power on/off switch.
Chapter 1 General Information 9
1.2 Features
Eight 6U card slots
Easy rackmount or panelmount installation
Accepts an ATX power supply, or two CompactPCI plug-in power
modules (optional)
Device bay accommodates up to 5 devices, secured by a lockable
door
Front removable devices
Hot-swappable fan tray
Optional fault detection and alarm module
1.3 Specifications
1.3.1 General
Construction: Aluminum frame and galvanized sheet steel
Device bay: Accommodates up to five 5.25" or 3.5" devices (or three
devices when an ATX power supply is installed), front removable
12-slot space (48 TE), incl. 7 CompactPCI slots and one system slot.
"Hot swappable platform complies with PICMG 2.1 R 1.0 Hot Swap
Specification
Dimensions (W x H x D, mounting flanges not included):
7U: 440 x 311 x 254 mm (17.3" x 12.25" x 10")
6U: 440 x 267 x 254 mm (17.3" x 10.5" x 10")
Weight: 12 kg
Operating temperature: 0 ~ 50° C (32 ~ 122° F)
Storage temperature: -20° C ~ 70° C (-4 ~ 158° F)
Relative humidity: 10 ~ 95% @ 40° C, non-condensing
Operating altitude: 0 to 10,000 feet (3048 meters)
10 MIC-3021/8 User's Manual
Storage/transit altitude: 0 to 40,000 feet (12,190 meters)
Shock: 10 G (operating); 30 G (storage/transit)
Random vibration:1 Grms (operating)
1.3.2 Fan Tray Module
Air flow:Two 88-CFM fans, providing 176 CFM in total
Power Consumption: 0.37 A @ 12 V per fan, 0.74 A total
Rated fan speed: 2200 rpm
Life expectancy: 50,000 hours @ 25° C
1.3.3 ATX Power Supply
Input: 90 ~ 135 or 180 ~ 265 VAC @ 47 ~ 63 Hz, switchable
Output: +3.3 V @ 15 A, +5 V @ 26 A, +12 V @ 9 A, -12 V @ 0.8 A
Minumum load: +3.3 V @ 0.3 A, + 5V @ 2 A, +12 V @ 1 A
Max output: 250 W total, 170 W for 5 V and 3.3 V
MTBF: 50,000 hours @ 70% load
Safety: UL/CUL/CE
Autres manuels pour CompactPCI MIC-3021/8
2
Table des matières
Autres manuels Advantech PC industriel
Advantech
Advantech SOM-5993 Manuel utilisateur
Advantech
Advantech DLoG DLT-V72 Series Manuel d'installation et d'exploitation
Advantech
Advantech IPC-242 Manuel utilisateur
Advantech
Advantech ARK-2121F Manuel utilisateur
Advantech
Advantech ARK-5260 Manuel utilisateur
Advantech
Advantech UBC-DS31 Manuel utilisateur
Advantech
Advantech IDK-1107WP Series Manuel utilisateur
Advantech
Advantech EIS-S232 Manuel utilisateur
Advantech
Advantech IPC-610 Manuel utilisateur
Advantech
Advantech UTC-315 Series Manuel utilisateur
Advantech
Advantech UNO-2184G Manuel utilisateur
Advantech
Advantech POC-S176 Series Manuel utilisateur
Advantech
Advantech MIC-720AI Manuel utilisateur
Advantech
Advantech TPC-5212W-633AE Manuel utilisateur
Advantech
Advantech PPC-3151-650AE Manuel d'installation et d'exploitation
Advantech
Advantech IPC-100 Manuel d'installation et d'exploitation
Advantech
Advantech Valor ANA-D8060 Series Manuel d'installation et d'exploitation
Advantech
Advantech UNO-2484G Manuel utilisateur
Advantech
Advantech TPC 51T 3BE Series Manuel utilisateur
Advantech
Advantech DLT-V83 SERIES Manuel utilisateur
