Advantech PWS-1419 Manuel utilisateur

PWS-1409/1419 User’sManual

PWS-1419/1409

9-slot 14.1”TFT LCD Portable Worstation

AdvantechPortableWorkstation

User’sManual

PWS-1409/1419 User’sManual

Theinformation containedinthisdocumentisbelievedtobeaccurate.However,no

responsibilityisassumedforitsuse,norforanyinfringementsofpatentsorotherrights

ofthirdpartywhichmay resultfromitsuse.Thisinformation issubjecttochangewithout

anynotice.

SafetyInstructions

1.Read thesesafetyinstructionscarefully.

2.Keep thisUser'sManualforlaterreference.

3.DisconnectthisequipmentfromanyACoutletbeforecleaning.Useadampcloth.Donotuseliquidor

spraydetergentsforcleaning.

4.Forplug-inequipment, the poweroutletsocketmustbe located nearthe equipmentand mustbe

easilyaccessible.

5.Keep thisequipmentawayfromhumidity.

6.Putthisequipmenton areliablesurfaceduring installation.Dropping itorlet-tingitfall maycause

damage.

7.The openingson the enclosureareforairconvection.Protectthe equipmentfromoverheating.DO

NOTCOVERTHEOPENINGS.

8.Makesurethe voltage ofthe powersourceiscorrectbeforeconnecting the equipmenttothe power

outlet.

9.Position the powercordsothatpeoplecannotstep on it. Donotplaceanything overthe powercord.

10.All cautionsand warningson the equipmentshouldbe noted.

11.If the equipmentisnotused foralong time,disconnectitfromthe powersourcetoavoiddamage by

transientovervoltage.

12.Neverpouranyliquidintoan opening.Thismaycausefireorelectricalshock.

13.Neveropen the equipment. Forsafetyreasons,the equipmentshouldbe opened onlybyqualified

servicepersonnel.

14.If one ofthe following situationsarises,getthe equipmentchecked byservicepersonnel:

a.The powercordorplug isdamaged.

b.Liquidhaspenetrated intothe equipment.

c.The equipmenthasbeen exposed tomoisture.

d.The equipmentdoesnotworkwell,oryou cannotgetittoworkaccordingtothe user'smanual.

e.The equipmenthasbeen dropped and damaged.

f. The equipmenthasobvioussignsofbreakage.

The sound pressurelevelatthe operator'sposition according toIEC704-1:1982 isno more

than 70dB(A).

DISCLAIMER:Thissetofinstructionsisgiven according toIEC704-1.Advan-techdisclaimsall re

sponsibilityforthe accuracy ofanystatementscontained herein.

PWS-1409/1419 User’sManual

Chapter2PWS-1409 Construction

1-1 Specification 7

1-2 Before You Start 8

1-3 Precautions 8

1-3-1 Power Connections 8

1-3-2 Non-Autosensing Power Supply 8

1-3-3 ATX Power Switch 8

1-3-4 Ventilation 9

1-3-5 Care for the LCD 9

1-4 Tools and Supplies Needed 9

1-5 Subassembly Contents 9

1-6 Parts Contents 9

1-6-1 Optional Slim FDD, CD ROM 10

1-6-2 Optional Slim FDD kit 10

1-6-3 Optional ROM Kit 10

1-7 Identifying Parts and Controls 11

1-7-1 Opening the Side Access Covers 11

1-7-1-a PWS1419 11

1-7-1-b PWS1409 11

1-7-2 Side View 12

1-7-2-a PWS1419 12

1-7-2-b PWS1409 12

1-7-3 Front View 13

1-7-3-a PWS1419 13

1-7-3-b PWS1409 14

1-8 Detaching the Keyboard 15

1-8-1 PWS1419 15

1-8-2 PWS1409 15

1-8-2-a The Standard Keyboard 16

.1-8-2-b The Optional Industrial Silicon Rubber Keyboard 16

Chapter1Getting Started

2-1 Opening The Chassis 17

2-1-1 Removing the Back Cover 17

2-1-2 Removing the Card Stabilizers 17

2-2 Identifying the Internal Parts 17

2-3 Removing the CD ROM Cage 18

2-4 Removing the Hard Driver and Slim Floppy Drive Cage 18

2-5 Installing the Backplane 18

2-6 Installing the Standoffs 18

PWS-1409/1419 User’sManual

Chapter 4 Using The System Controls

Chapter3PWS-1409 Construction

2-7 Connecting the Power Connector 20

2-8 Installing the Slim CD ROM to the CD ROM Cage 20

2-9 Installing the CD ROM Cage 22

2-10 Installing Drives in the Drive Cage 22

2-11 Installing the Hard Drive 23

2-12 Installing the Slim Floppy Disk Drive 23

2-13 Installing the Drive Cage into the Case 25

2-14 Installing the SBC 26

2-14-1 Setting your SBC Jumpers 26

2-15 Installing the Add-on Cards 27

2-16 Installing the Card Stabilizers 27

2-17 Preparing to Start the System 28

2-17-1 Connecting the Video and Input Devices 28

2-17-2 Closing the Back Cover 29

3-1 Opening The Chassis 31

3-1-1 Removing the Back Cover 31

3-2 Removing the Card Stabilizers 31

3-3 Identifying the Internal Parts 31

3-4 Removing the Drive Cage 31

3-5 Installing the Backplane 32

3-5-1 Installing the Standoffs 32

3-6 Connecting the Power Connector 34

3-7 Installing the Drives to the Drive Cage 34

3-8 Insttalling the Driver Cage into the Case 36

3-9 Installing the SBC 37

3-9-1Setting your SBC Jumpers 37

3-10 Installing the Add-on Cards 38

3-11 Installing the Card Stabilizers 38

3-12 Preparing to Start the System 39

3-12-1 Connecting the Video and Input Devices 39

3-13 Closing the Back Cover 40

PWS-1409/1419 User’sManual

AppendixA. Troubleshooting

4-1 Starting your System 42

4-1-1 Systems with ATX Power Supply 42

4-2 OSD Controls 43

4-2-1 Adjusting the OSD Parameters 43

4-3 Changing Filter for the internal Fan 43

4-3-1 PWS-1419 43

4-3-2 PWS-1419 44

A-1 Trouble Shooting Techniques 46

A-1-1 No screen after pressing front power switch 46

A-1-1-a Power supply fan not spinning: 46

A-1-1-b Power supply fan is spinning and LCD has no backlight 46

A-1-1-c Power supply fan is spinning and LCD has backlight and

power LED is on: 46

A-1-2 LCD screen shows garbage or bad characters or vertical

horizontal color lines or bar: 46

A-1-3 LCD screen works fine in Windows but acted funny when

running certain programs or games: 47

A-1-4 The display is not on the LCD center 47

A-2 Keyboard and pointing device not responding 47

AppendixB:LCDVIDEOController

B-1 Introduction 49

B-2 Safety Precautions 50

B-3Configuring Your Controller 50

B-3-1 LCD with TTL Interface 50

B-3-2 LCD wits LVDS Receiver Interface 50

B-4 OSD Controls 50

B-4-1 Adjusting the OSD Parameters 51

PWS-1409/1419 User’sManual

1-1 Specification 7

1-2 Before You Start 8

1-3 Precautions 8

1-3-1 Power Connections 8

1-3-2 Non-Autosensing Power Supply 8

1-3-3 ATX Power Switch 8

1-3-4 Ventilation 9

1-3-5 Care for the LCD 9

1-4 Tools and Supplies Needed 9

1-5 Subassembly Contents 9

1-6 Parts Contents 9

1-6-1 Optional Slim FDD, CD ROM 10

1-6-2 Optional Slim FDD kit 10

1-6-3 Optional ROM Kit 10

1-7 Identifying Parts and Controls 11

1-7-1 Opening the Side Access Covers 11

1-7-1-a PWS1419 11

1-7-1-b PWS1409 11

1-7-2 Side View 12

1-7-2-a PWS1419 12

1-7-2-b PWS1409 12

1-7-3 Front View 13

1-7-3-a PWS1419 13

1-7-3-b PWS1409 14

1-8 Detaching the Keyboard 15

1-8-1 PWS1419 15

1-8-2 PWS1409 15

1-8-2-a The Standard Keyboard 15

.1-8-2-b The Optional Industrial Silicon Rubber Keyboard 15

Chapter1Getting Started

PWS-1409/1419 User’sManual

Supportpassivebackplane formfactorplatforms.

14.1”High resolution colormatrixTFT LCD display

Built-inanalog todigitalVGAsignalconversion board

Add-on cardretention system.

Shock mountprotection forthe harddisk driver

Detachable104/105-keys keyboard(water-resistantoptional).

Built-inkeyboardpointing device.

Built-inspeakerwithamplifier

200WATXpowersupply(optionalDC powersupply)

Carrying casewithwheel.

Environment

Operating temperature:-8Cto60C,10-80%humidity

Storage temperature:-20Cto60C,5-95%humidity

Chapter1Getting Started

PWS-1409

Dimensions:15.7”/399mm (W)

13.2”/335mm(H)

10.4”/264mm (D)

Weight: 18lbsSKD;approx.22lbssystem

Dimensions&Weight

PWS-1419

Dimensions:16.6”/421mm (W)

12.1”/282mm(H)

9.1”/230mm(D)

Weight: 21lbsSKD;approx.26lbssystem

1-1GeneralFeatures

All aluminumconstructed chassis.(forPWS-1419 only)

Rubberbumperprotected corners.(forPWS-1419 only)

ABS plastichousing withaluminuminternalchassis.(forPWS-1409 only)

3mm Impact-resistantLCD screen w/tempered glass(forPWS-1419 only)

PWS-1409/1419 User’sManual

1-2BeforeYou Start

Themajorcomponentofthesubassemblyisthechassis,whichcomes intwomod-

els—8x ISA/1CPUslotor4xPCI/ 4ISA/1CPUslotPassive Backplane.Thechassis

comes pre-assembledwithanactive matrixLCD,LCD controller,powersupply,

keyboard,ventilation fansand internalspeaker.To completethesystem,you mustadd a

systemboard,CPUand peripheraldevices.

Beforeadding thesedevices,itisimportanttofollowcertainbasicsafetyprecautions.You

shouldbecomefamiliarwiththe chassisbothexternallyand internally.And you shouldalso

havethe righttoolsavailabletoyou.

1-3 Precautions

1-3-1 Power Connections

The major component of the subassembly is the chassis, which comes in two models—8x

ISA/ 1 CPUslot or 4 x PCI/ 4 ISA/1 CPU slot Passive Backplane. The chassis comes pre-

assembled with an active matrix LCD, LCD controller, power supply, keyboard, ventilation fans

and internal speaker. To complete the system, you must add a system board, CPU and periph-

eral devices.

Use Supplied Power Cord

The subassembly is shipped with a power cord compatible with the AC wall outlet in your

region.

1-3-2 Non-Autosensing Power Supply

Before plugging in the power cord, examine the power supply to see if you have an

autosensing or non-autosensing power supply.

Autosensing power supplies automatically adjust to the AC constructed of metal and provide

front impact protection for outlet voltage. If your subassembly is shipped with a non-

autosensing power supply, there will be a voltage selector switch located near the AC power

connector. Make sure it’s set to the appropriate voltage setting for your power outlet.

1-3-3 ATX Power Switch

The power supply shipped with the ATX chassis may or may not have an ON/OFF switch. To

power up your system where the power supply has an ON/OFF switch, you must first press the

switch to the ON position and then press the ATX power up/down switch located on the front to

start your system.

The ATX power switch found on the front of the chassis DOES NOT turn off the AC

power. To remove AC power from your system, you must unplug the AC power

cord from the AC outlet or the chassis.

PWS-1409/1419 User’sManual

1-3-4 Ventilation

The chassis comes with three intake fans and one power supply exhaust fan providing

cooling and air flow. When operating the system, never block any ventilation openings. Always

leave enough room around the chassis to allow adequate air flow.

1-3-5 Care for the LCD

The chassis comes with a pre-assembled active matrix LCD. Liquid crystal displays are

made of glass which will break or crack if mishandled. During system assembly, keep the

keyboard latched to the chassis. The keyboard housing is constructed of metal and provides

front impact protection for the LCD during transportation.

1-4 Tools and Supplies Needed

Before beginning your work, make sure you have the following tools and supplies available:

ƒÜ #2 Phillips (cross head) screwdriver.

ƒÜ An anti-static wrist strap (recommended).

1-5 Subassembly Contents

ƒÜ The subassembly consists of,

ƒÜ This subassembly guide.

ƒÜ Chassis with pre-assembled LCD, LCD controller, power supply, cooling fans, internal

speaker and keyboard with integrated pointing device.

ƒÜ Power cord.

ƒÜ Carrycase.

ƒÜ Parts for installing motherboard and drives.

ƒÜ See Appendix for technical specifications.

1-6 Parts Contents

The subassembly parts kit contains the following hardware for installing boards and drives.

1. Round head screw 2Ö long (for securing CD ROM interface board)

2. Round head screw (for securing backplane on the standoff, interface board).

3. Metal washer (use with the flat head and round head screws for mounting the drives)

4. Insulating washer (when installing the motherboard use it with the round head screw 4).

5. Flat head screw (for securing hard driver).

6. Black round head screw (securing driver cage to side of case, CD ROM cage to the case)

7. Black flat screw (securing driver cage to the bottom of the case, back cover)

8. Round head screw 2.5Ö (for securing slim floppy disk)

9. Motherboard Standoff

10.Round head screw 2Ö short (for securing slim CD ROM)

PWS-1409/1419 User’sManual

1-6-1OptionalSlimFDD,CD ROM

OptionalSlimFloppyDisk Kit

1.Floppydisk powercable

2.Floppyinterfaceboard

3.Floppydisk signalcable

(frominterfacetodisk)

4.Slimfloppydisk

1-6-2OptionalSlimCD ROMDisk

1.SlimCD ROMinterfaceboard

2.CD ROMpowercable

(interfacetopowersupply)

3.Audiocable

(interfaceboardtosound cardor

SBCAudioout)

4.SlimCD ROM

1-6-3OptionalSlimFDD +SlimCD ROMDisk

1.Floppydisk signalboard

(frominterfacetodisk)

2.Floppyinterfaceboard

3.PowercableforSlimfloppydisk and CD ROM.

(powersupplytoFloppydisk and slimCD ROM

4.Slimfloppydisk

5.Audiocable

(interfaceboardtosound cardorSBCAudioout)

6.SlimCD ROMinterfaceboard

7.SlimCD ROM

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Advantech Ordinateur de bureau

Advantech

Advantech ARK-3400 Manuel utilisateur

Advantech

Advantech MR6550 Manuel utilisateur

Advantech

Advantech iHealthcare POC-W213L Manuel d'instructions

Advantech

Advantech ARK-3382 Manuel utilisateur

Advantech

Advantech USC-360 Manuel utilisateur

Advantech

Advantech UTC-318 Series Manuel utilisateur

Advantech

Advantech ARK-1221L Manuel utilisateur

Advantech

Advantech UNO-2362G Series Manuel utilisateur

Advantech

Advantech POC-621-02 Series Manuel utilisateur

Advantech

Advantech PPC-415 6 Series Manuel utilisateur

Advantech

Advantech ARK-7060 Manuel utilisateur

Advantech

Advantech ARK-2230 Manuel utilisateur

Advantech

Advantech ITA-5831 Series Manuel d'installation et d'exploitation

Advantech

Advantech ARK-1220F Manuel utilisateur

Advantech

Advantech IPC-690 Manuel utilisateur

Advantech

Advantech ARK-1250L Manuel utilisateur

Advantech

Advantech UNO-2272G Manuel utilisateur

Advantech

Advantech PPC-415 TGL Manuel utilisateur

Advantech

Advantech DLoG DLT-V72 Series Manuel utilisateur

Advantech

Advantech ARK-6310 Manuel utilisateur

Advantech

Advantech TPC-5212W Series Manuel utilisateur

Advantech

Advantech ECU-4574 Series Manuel utilisateur

Advantech

Advantech AIM-35AT Series Manuel d'installation et d'exploitation

Advantech

Advantech ARK-5260 Guide d'installation

Manuels Ordinateur de bureau populaires d'autres marques

HP m9060n - Pavilion - Elite Fiche technique

Asus

Asus E210 Series Manuel utilisateur

Dell

Dell Inspiron 600m Manuel utilisateur

Dell

Dell Inspiron 3662 Manuel utilisateur

TotalFlow

TotalFlow uFLO Manuel utilisateur

HP Presario SV7000 - Desktop PC Manuel utilisateur

HP ProDesk 400 G5 Manuel

Logitech

Logitech MK320 Manuel utilisateur

Dell

Dell XPS 730 H2C Manuel utilisateur

Sony

Sony Vaio Series Manuel utilisateur

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manuel utilisateur

Alto

Alto MD 250 Manuel utilisateur

Lenovo

Lenovo ThinkCentre Edge 72 Manuel

Lenovo

Lenovo ThinkStation D20 Manuel

Arbor Technology

Arbor Technology FPC-7800 Series Manuel utilisateur

Sony

Sony VAIO VGX-TP1 Series Manuel utilisateur

Asus

Asus Eee Box B204 Manuel utilisateur

Dell

Dell Optiplex 9010 All In One Manuel utilisateur