Advanced Air ID-200 Manuel utilisateur
Installation & Operation
Manual
Model: ID-200
All Models: 24V AC | Fuse: 500mA
IMPORTANT: READ THIS MANUAL CAREFULLY FOR PROPER
INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS.
www.AirMadeBeer.com
PLEASE REGISTER YOUR WARRANTY AT: www.airmadebeer.com/warranty-registraon
LIMITED 3 YEAR WARRANTY
For warranty service, please contact your Independent HVAC or Electrical Contractor for the address of the nearest service center
or email: customercare@airmadebeer.com
WHAT IS COVERED BY THIS WARRANTY
Advanced Air hereby warrants to the consumer that the product purchased under this warranty be free from defects in material
and workmanship under normal use when installed, operated and maintained in accordance with the manufacturer’s instrucons.
In the event of a product defect, failure or malfuncon, Advanced Air will, for a period of three (3) years from the date of purchase, repair or replace at its discreon the
defecve, failed or malfunconing product purchased under this Warranty. Installaon and/or removal labor costs or charges are not covered under this warranty.
INSTALLATION AND MAINTENANCE REQUIREMENTS
This warranty is expressly condioned upon proper installaon, operaon, cleaning and maintenance, all in accordance with this Installaon and Operaon Manual. Failure to
meet any of these requirements will void this warranty. Servicing of your Advanced Air BiPolar Ionizaon product by pares other than our authorized representaves and/or
using parts other than genuine Advanced Air parts will also void this warranty.
WHAT IS NOT COVERED BY THIS WARRANTY
Ordinary wear and tear shall not be considered a defect in workmanship or material. These warranes do not apply for loss or damage caused by accident, shipping, re,
abuse, misuse, improper installaon, leaking, modicaon, misapplicaon, or by any repairs other than those provided by our authorized Service Center. This warranty is
non-transferable.
EXCLUSION OF OTHER WARRANTIES AND CONDITIONS
EXCEPT AS PROVIDED HEREIN, WE MAKE NO REPRESENTATION OR WARRANTY OF ANY KIND. ALL OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, ARE HEREBY
EXPRESSLY DISCLAIMED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
LIMITATION OF LIABILITY FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
WE SHALL NOT IN ANY CASE BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM BREACH OF EXPRESSED OR IMPLIED WARRANTIES,
CONDITIONS, GUARANTEES OR REPRESENTATIONS, BREACH OF CONTRACT, NEGLIGENCE, INSTALLATION OR ANY OTHER LEGAL THEORY. Such excluded damages include, but
are not limited to, loss of prots or revenue, and loss of the use of the products, and any loss caused by leaks or other water damage.
FOR U.S. APPLICATION ONLY
This warranty gives you specic legal rights, and you may also have other rights which vary from state to state. Some states do not allow limitaons on warranes, or on
remedies for breach. In such states, the above limitaons may not apply to you.
FOR CANADIAN APPLICATION ONLY
Exclusion of Subsequent Owners: Except as otherwise required by applicable legislaon, this warranty is not transferable. This warranty gives you specic legal rights and you
may also have other rights which vary from province to province. Some provinces and territories do not allow limitaons on warranes, or on remedies for breach. In such
provinces or territories, the above limitaons may not apply to you. If any provision of this warranty or part thereof is held by a court of competent jurisdicon to be invalid,
illegal, or unenforceable, the validity, legality and enforceability of the remaining provisions or parts thereof will not in any way be aected or impaired within the jurisdicon
of that court. This enre warranty shall connue to be valid, legal and enforceable in any jurisdicon where a similar determinaon has not been made.
SERVICE
For service quesons or inquiries please contact us at: customercare@airmadebeer.com
3 YEAR WARRANTY
MAINTENANCE
Advanced Air BiPolar Ionizaon Systems are designed for connuous operaon without requiring replacement parts. It is recommended that the device is mounted
downstream from the lter to ensure the carbon bre brushes remain as clean as possible.
Cleaning Interval: Advanced Air BiPolar Ionizers are designed for low maintenance. The devices should be checked semi-annually to conrm the brushes are clean for
maximum performance. If the carbon bre brushes get dirty, please follow the instrucons below for proper cleaning and maintenance.
1. Disconnect the power to the BiPolar unit.
2. Remove any dust from the brushes with either compressed air or gently brushing the emier brushes with a small so bristle brush.
3. Reconnect the power to the BiPolar unit. Page 1 of 2
BiPolar ID-200
SAFETY WARNINGS
DISCLAIMER
Manufacturer is not responsible for any issues, injuries or damages caused as a result of:
• Misuse or improper applicaon of the product.
• Placement of the product in a locaon or in a manner which is not contained in this manual.
• Improper installaon or products installed in a manner which does not follow the installaon instrucons contained in this manual.
• Any installaon not performed by a licenced Mechanical, HVAC or Electrical contractor.
• Use of replacement parts not manufactured or supplied by Advanced Air.
CAUTION
RISK OF ELECTRIC SHOCK! Disconnect power at breaker or fuse panel before installing this device or performing any service/replacement of parts. Also, disconnect
power to the unit before performing any service, maintenance or parts replacement.
*Always follow OHSA electrical lockout safety requirements to prevent accidental exposure to electrical energy during installaon or service/repair.
WARNING
• Keep all wires away from the carbon bre brushes, allowing at least one inch (2”) of spacing between the carbon bre brushes and anything metal or grounded.
• Never touch the ion needles or carbon brushes while operang.
• Only install this product in a dry locaon away from water or moisture. Only install this product indoors on a metal surface in an HVAC handler or duct, and away from
extreme heat or cold.
MECHANICAL INSTALLATION
WARNING: Do not connect to power before installaon is complete.
1. Mount the BiPolar Ionizaon unit downstream of the lter and before
the cooling/heang coil. For best results avoid locaons directly
downstream of the cooling/heang coil or humidier.
2. Mount the BiPolar unit at or near the fan inlet on a metal surface in the
air handler or internal wall duct ensuring the airstream ows over the
two brushes simultaneously. See Figure 1
3. Aach using the magnet provided to a metal surface. If mounng the
unit on the fan housing, ensure the unit is secured well from fan vibraon.
If mounng using screws, (not included) in applicaons where there is high
velocity air streams or excessive vibraon, use self tapping short length
screws, so they do not impair fan operaon or cause damage to equipment.
4. The ps of the carbon brushes should be at least 2” away from any
metallic or grounded object.
FIGURE 1
ELECTRICAL INSTALLATION
WARNING: Do not connect to power before installaon is complete. Always
disconnect power from the unit before handling the ionizer.
1. All eld wiring to be done in accordance with NEC and Authories Having
Jurisdicon (AHJ).
2. Connect power to the BiPolar Ionizer using appropriate voltage of 24V AC.
See Figure 2.
3. Wires: RED: Posive / Hot ; BLACK: Negave
4. For best results, interlock the BiPolar Ionizer with fan power.
5. Keep power wires away from ps of the units brushes.
6. Apply power to unit. Green light indicates the ionizer is funconing properly. IN LINE
500mA FUSE
FIGURE 2
RED - 24V AC
Positive / Hot Wire
BLACK - 24V AC
Negative Wire
+—
Hardware Provided: 1-BiPolar Ionizaon unit | 1-Securing Magnet | 1 - 500mA Fuse.
Hardware Required by Installer: Electrical Connectors | Mounng Screws (if needed)
POWER LED
(+)
(—)
EMMITER BRUSHES (+/-)
Fastening Bracket for
Screws (if needed)
Page 2 of 2
Phoenix, AZ USA
Phone: 602-975-8396
Email: customercare@airmadebeer.com
www.AirMadeBeer.com
© 2022 Advanced Air
OPERATION
1. When power is supplied to the ionizer, the green power/operaon light will illuminate indicang the ionizer is acve and working.
2. The BiPolar ionizer is self balancing and does not require any adjustments.
EPA
Est. Reg. No.
99880-CHN-1
Made in China
CONFORMS TO:
• UL STANDARD 867
• UL STANDARD 2998
• CSA STANDARD
C22.2 No 187-M1986
• RoHS Direcve (EU) 2015/863
• REACH
E521171
SPECIFICATIONS
Model Voltage Current Fuse Airow
Capacity
ID-200 24VAC 10mA 500mA 2000cfm
Table des matières
Autres manuels Advanced Air Électricité industrielle
Manuels Électricité industrielle populaires d'autres marques
Murata
Murata GJM0335C1E4R4BB01 Series Manuel utilisateur
Stahl
Stahl 8575/12 Manuel utilisateur
SI
SI Pegasus Manuel utilisateur
Murata
Murata GRM1555C1H2R7CA01 Seies Manuel utilisateur
Murata
Murata GRM0225C1E6R4BA03 Series Manuel utilisateur
Cooper Power Systems
Cooper Power Systems VXE15 Manuel utilisateur
S&C
S&C Vista SD Manuel utilisateur
Murata
Murata GRM0335C2A7R3CA01 Series Manuel utilisateur
Siemens
Siemens 3VA9988-0BM10 Manuel utilisateur
Siemens
Siemens SITRANS LVS100 Manuel utilisateur
Murata
Murata GRM32ER60G227ME05 Series Manuel utilisateur
Siemens
Siemens SENTRON SUPERSWITCH 3KL82 Series Manuel utilisateur