10
(2) Schedule Motion Detection Record: Suitable to record, when there are
severe image changes. Motion detection triggers schedule recording, but it
will only start recording when the variation exceeds the alarm limitation value.
For more information, please refer to【6.4 Motion Detection】and【6.5 Manual
Record & Schedule Record】.
(3) Schedule Continuous Record: Suitable for few constant frame recording or
on long-term continuous recording. For more information, please refer to【6.5
Manual Record & Schedule Record】.
(4) Schedule Alarm Record:Suitable for external alarm recording. When alarm
schedule been setup, alarm icon will be shown on the display status bar
(alarm triggered recording is setup).
2. Stop Record:
Manual Record Press《 /》/《MENU/ OK》button, or stops manual recording
when entering playback mode.
Schedule Record Enter playback mode, all kinds of recordings (Alarm/ Motion
Detection/ Continuous) under schedule recording will be
stopped.
To continue recording, please follow the methods below to restart recording.
Manual Record Repress《REC》button.
Schedule Record Stop playback and the system will auto re-check the record
schedule setup again.
3. System recording is determined according to the recording priority order (Record
Priority: Manual/Alarm/ Motion Detection/ Continuous).
4. Different recording modes may have different kinds of setups. Basic setup: video
size, recording frames, video quality, and audio recording. When different
recording modes are triggered, the system starts recording according to the
different setup. This kind of design provides flexibility to ensure efficient
recording time and quality. Example: Work hour from 8:00am to 6:00pm, setup
「Schedule Record」to low video quality with less recording frames to extend the
recording time. And off work hour, setup 「Motion Detection Record/ Alarm
Record」to enable high video quality with the highest recording frames, when an
event occurs.
5. When video input is interrupted, recording automatically stops.
6. Video or audio may be recorded into the SD card (SD card is purchased
separately).
Do not withdraw the SD card while recording. It may destroy the data stored within the SD card.
Power loss during recording results incomplete videos or errors.
5.4 Playback Mode
Selectable Playback format: Normal Playback and Search and Playback.
(1) Normal Playback: Press《/》button to first playback the final recorded data, and then
according to the SD card file recording order.
Advance Security
www.surveillance-spy-cameras.com
866-720-0779 or 618-257-1810
