ADTRAN DS3 Manuel utilisateur

TOTAL ACCESS 4303 DS3 MODULE

DS3 MODULE

CLEI: SLPOCD0C_ _

1200333L1

ONLINE

STATUS

DS3

61200333L1-22B

0310

■ For a complete Installation and Maintenance Practice (P/N 6 200333L -5): 877-457-5007, Faxback Document 860. Please have your fax number ready. ■

C A U T I O NC A U T I O N !

SUBJECT TO ELECTROSTATIC DAMAGE

OR DECREASE IN RELIABILITY.

HANDLING PRECAUTIONS REQUIRED.

FRONT PANEL LEDs

ONLINE ●●Off Blown fuse or no power supplied to the shelf

●Green Online

✷Flashing Green Offline

●Amber Self-test in progress

●Red Module failure

✷Flashing Red Self-test failure

STATUS ●Green Active DS3 Module

✷Flashing Green Standby DS3 - redundancy enabled

✷Flashing Red Standby DS3 - cannot automatically become the active

DS3 while the current active DS3 is installed

DS3 ●●Off DS3/DS1 not configured for use

●Green DS3/DS1 signal present and synchronized; channel is

configured for use

●Amber DS3/DS1 test in progress (includes port self-test)

●Red DS3/DS1 alarm present

✷Flashing Red DS3/DS1 error

NOTE: The Total Access 4303 DS3 Module requires SCU firmware of C.02 or greater.

INSTALLATION

■Insert the module into the desired slot (1through 4only) (hot insertion permissible).

■The module connects to connectors on the backplane. Connecting the BNC Module

(P/N 1200323L1) to the connectors provides two dual BNC connectors (see the BNC

Module Job Aid, 61200323L1-22).

■The Total Access®4303 SCU automatically detects the presence of the module. There

is no need to reboot.

■Once installed, use the terminal menus to configure and control the module (see the

SCU Job Aid, 61200334L1-22).

■Use the arrow keys on the VT100 terminal keyboard to move to the Modules menu;

press ENTER in the Menu column of the appropriate module.

JOBAID

#61200333L1-22B#

SPECIFICATIONS

Specificatio s

Framing M 3 or C-Bit Parity

Line Coding B3ZS (bipolar 3 zero substitution)

Line Build Out 0 to 50 feet (Short)

5 to 450 feet (Long)

Tests Self-test

Local Line and Payload Loopbacks

Remote Line and Payload Loopbacks

Line Rate 44.736 Mbps ± 895 bps

Terminating Impedance 75 ohms ± 5%, unbalanced

Power 2 watts

Compliance FCC Part 5, UL 60950, NEBS Level 3

Temperature Operation: 0ºC to 50ºC

Storage: –40ºC to 70ºC

Relative Humidity To 95% noncondensing

COMPLIANCE

The Total Access 4303 DS3 module is NRTL listed to the applicable UL standards.

The Total Access DS3 is to be installed in a restricted access location and in a Type

“B” or “E” enclosure only.

This device complies with Part 15 of the FCC rules. Operation is subject to the fol-

lowing two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

Changes or modifications not expressly approved by ADTRAN could void the user’s

authority to operate this equipment.

WARRANTY

ADTRAN will replace or repair this product within the warranty period if it does not

meet its published specifications or fails while in service. Warranty information can

be found at www.adtran.com/warranty. U.S. and Canada customer Faxback:

877-457-5007, Document 414.

Code I put Output

Power Code (PC) F C

Telecommunication Code (TC) – –

Installation Code (IC) A –

TOTAL ACCESS 4303 DS3 MODULE

PRICING AND AVAILABILITY 800.827.0807

TECHNICAL SUPPORT 800.726.8663

RETURN FOR REPAIR 256.963.8722

www.adtra .com

61200333L1-22B

Total Access 4303

Module Menu

Part Number

Serial Number

CLEI Code

Board Revision

[Prt]

Rx Alarms

Far End Alarms

CBIT Status (Rx Framing)

[Prt]

Clear Results <+>

Errored Seconds - line

Severely Errored Seconds - line

LOS Seconds - line

Code Violation - path

Errored Sec - path

SEF/AIS Seconds - path

Severely Errored Sec - path

Unavailable Sec - path

DS3 Info

DS3 Alarms

[Prt]

Port Name

Frame Format

DS3 Configurations

LoopBack

DS3 Test

[Prt]

Port Name

State

DS1 Configuration

DS3 Perf Current

DS3 Perf 15 Min

DS3 Perf 24 Hr

M13

CBIT

Clock Source Recovered

Internal

LBO Short

Long

[Prt]

Remote Status

None

Line

None

DS3 Line

DS1 #N Line (where N=1 to 28)

DS1 All Line

Auto

Auto BER

IS AS

OOS

None

2E-7

• • •

9E-7

1E-6

• • •

7E-6

Frame Format

OSS Threshold

IS Threshold

ESF

Auto TXYellow Alarm

Transmit PRMs Off

Remote Device

Ignore

Loopback Accept

Disabled

ADTRAN

Type 1

Type 2

Remote LB

DS1 Alarm & Status

Disabled

Enabled

[Prt]

Clear Results <+>

Errored Seconds

Bursty Errored Seconds

Severely Errored Seconds

Severely Errored Frame Secs

Loss of Frame Count

Controlled Slip Seconds

Unavailable Seconds

Path Code Violations

Degraded Minutes

Test Status

Pattern Status Clear <+>

Pattern Error Inject <+>

DS1 Test

Redundancy

Minimum Switch Time

Switch Count

Clear Switch Count <+>

Force Switchover <+>

Disabled

1E-03

1E-04

1E-05

1E-06

DS1 Perf Current

DS1 Perf 15 Min

DS1 Perf 24 Hr

DS0 Alarms

DS0 Configuratiion

DS0 Map Status

[Prt]

Alarms

Status

BER

DS1 Signal Status [Prt]

None

Line

Payload

Local Loopback

Remote Loopback

None

All Ones

All Zeros

QRSS

QRSS 56k

DALY

3-IN-24

1-IN-8

2-IN-8

[Prt]

DS0 Config

DS0 Not Used Count

Module Redundancy

Test Pattern

Error Threshold

None

ATT Inband

ANSI FDL Line

ANSI FDL Pyld

NIU Inband

[Prt]

MENU TREE FOR THE DS3 MODULE TERMINAL MENUS

Ce manuel convient aux modèles suivants

Autres manuels ADTRAN Carte réseau

ADTRAN

ADTRAN ATLAS 800 Series Module QUAD E1 Manuel utilisateur

ADTRAN

ADTRAN TRACER Protection Switch Manuel utilisateur

ADTRAN

ADTRAN 3192 H2TU-C Manuel utilisateur

ADTRAN

ADTRAN AHT1U Manuel utilisateur

ADTRAN

ADTRAN TRACER 6000 SERIES Guide de l'utilisateur

ADTRAN

ADTRAN 5000 Series Manuel d'utilisation

ADTRAN

ADTRAN NetVanta Internet-Based WAN Backup Manuel utilisateur

ADTRAN

ADTRAN NIU3 Mode d’emploi

ADTRAN

ADTRAN 900 Series Manuel utilisateur

ADTRAN

ADTRAN Type 400 Mode d’emploi

ADTRAN

ADTRAN 239 T1 HDSL4 Mode d’emploi

ADTRAN

ADTRAN ATLAS 800PLUS Manuel utilisateur

ADTRAN

ADTRAN DDM+ H2TU-C Mode d’emploi

ADTRAN

ADTRAN 239 H4R Manuel utilisateur

ADTRAN

ADTRAN AHDSL2 Mode d’emploi

ADTRAN

ADTRAN TSU 600 Manuel utilisateur

ADTRAN

ADTRAN TOTAL ACCESS OPTI-T200 Manuel utilisateur

ADTRAN

ADTRAN NetVanta 1000R Series Manuel d'utilisation

ADTRAN

ADTRAN ATLAS 550 Manuel utilisateur

ADTRAN

ADTRAN U-BR1TE Manuel utilisateur

ADTRAN

ADTRAN 850 DSX-1 Manuel utilisateur

ADTRAN

ADTRAN ATLAS 800 Series Module Nx56/64 Bonding Manuel utilisateur

ADTRAN

ADTRAN Total Access 1500 Mode d’emploi

ADTRAN

ADTRAN NetVanta 8044M Manuel utilisateur

Manuels Carte réseau populaires d'autres marques

FirstComm

FirstComm OBiWiFi5G Manuel utilisateur

Sun Microsystems

Sun Microsystems Interface Adapter Manuel utilisateur

TRENDnet

TRENDnet TU2-ETG Manuel utilisateur

YASKAWA

YASKAWA SI-EN3 Manuel utilisateur

Paradyne

Paradyne BitStorm 2600 IP DSLAM Manuel utilisateur

Belkin

Belkin F5D7050 Manuel utilisateur

3Com

3Com EtherLink 3C509B Manuel utilisateur

TRENDnet

TRENDnet TEG-PCITX Manuel utilisateur

Cisco

Cisco MC16E Manuel utilisateur

Delta Electronics

Delta Electronics Braking Modules VFDB Series Manuel utilisateur

TwinMOS

TwinMOS Booming Manuel utilisateur

Dialogic

Dialogic Media Board DM/V1200BTEPEQ Manuel utilisateur

Buffalo

Buffalo AirStation WLI-PCM-L11GP Manuel utilisateur

National Instruments

National Instruments NI 9234 Manuel utilisateur

Hama

Hama 49276 Manuel utilisateur

Linksys

Linksys WCF54G - Wireless-G Compact Flash Card Manuel d'utilisation

Compaq

Compaq Wireless LAN 100 Manuel utilisateur

Bose

Bose PowerMatch Dante Manuel utilisateur