ADTRAN MX2810 M13 Manuel utilisateur

Product Features

■Affordable DS3 bandwidth

consolidation

■Built-in 1:1 redundancy

■Hot-swappable controller

cards and power

supplies

■SNMP and Telnet management

■TL1 alarming and provisioning

support

■Backhaul multiple service

types (T1/E1)

■Smallest M13 form factor

available

■Dual redundant load sharing

DC power supplies

■M13 and C-Bit signaling

support

■Industry-standard CSU and

NIU loopback codes

■NEBS Level 3 compliant

■Industry-leading, 10-year

warranty

Backhaul consolidation of T1 remains an

important function in network operations.

With central office space at a premium,

carriers need an M13 device that provides

cost efficiency, compact size, and built-in

intelligent redundancy. ADTRAN®has

applied its industry-leading expertise in

developing carrier class products to the

MX2810TM M13 multiplexer. The MX2810

offers bandwidth consolidation at a low price

and in the smallest footprint available in the

industry. Measuring only 1U high in 19-inch

or 23-inch rackmount configurations, this

compact device gives ILECs a powerful tool

for consolidating 28 T1 signals or 21 E1

signals into a T3 circuit.

The MX2810 houses two hot-swappable

controller cards capable of combining inde-

pendent T1s, E1s, or T1s and E1s on the same

DS3. The two controller cards also provide

built-in 1:1 redundancy for the DS1 and DS3

signals, as well as built-in BERT (Bit Error

Rate Testing) capabilities. When a T1 failure is

detected, the MX2810 will not swap to the

secondary board until it determines that the

failure is hardware-oriented and not a line

failure. This intelligent redundancy feature

minimizes unnecessary hits to the line that

other M13 units may allow.

Like all ADTRAN products, the MX2810

offers comprehensive management options,

including full management and GUI support

from ADTRAN’s Total Access®EMS. It features

a VT100 terminal interface for local configura-

tion. To support SNMP and Telnet

management, the MX2810 has an integrated

10Base-T Ethernet port. It has an RS-232 port

for network management, as well as an

RS-485 port for daisy chaining multiple units.

TL1 alarming and provisioning are also

supported.

The MX2810 meets the most stringent

NEBS Level 3 requirements. In addition, the

product is backed by an industry-leading

10-year warranty.

M13 Multiplexer

MX2810 M13 Multiplexer

Specifications are subject to change without notice. MX2810 is a trademark and

ADTRAN and Total Access are registered trademarks of ADTRAN, Inc. All other

registered trademarks and trademarks mentioned in this publication are the prop-

erty of their respective owners.

ADTRAN, Inc.

901 Explorer Boulevard

Huntsville, AL 35806

P. O. Box 140000

Huntsville, AL 35814-4000

256 963 8000 voice

256 963 8030 fax

877 457 5007 fax back

General Information

800 9ADTRAN

[email protected]

www.adtran.com

Pre-Sales

Technical Support

888 5ADTRAN

[email protected]

www.adtran.com/support

Where to Buy

800 827 0807

www.adtran.com/where2buy

Post-Sales

Technical Support

800 726 8663

[email protected]

www.adtran.com/support

Regional Offices

Dallas, TX

972 830 9070

Denver, CO

303 471 9150

Irvine, CA

949 260 3500

Kansas City, KS

800 471 8649

Newark, NJ

800 471 8656

Ontario, Canada

416 290 0585

Quebec, Canada

877 923 8726

San Antonio, TX

888 223 7671

International Inquiries

+1 256 963 8716 voice

+1 256 963 6300 fax

[email protected]

www.adtran.com/international

ADTRAN is a

TL 9000 registered company.

ADTRAN is an

ISO 9001:2000 registered company.

Product Specifications

Mechanical

■Dimensions: 1.7 in. H x 17 in. W x 7.86 in. D

(4.32 cm H x 43.18 cm W x 19.96 cm D)

■Weight: 5.5 lb (2.495 kg) (fully redundant)

Interfaces

DS3 Network Interface

■Channelized DS3

■Line build out: Short (0 to 50 feet), and

Normal (50 to 450 feet)

■Framing format: M13 and C-bit parity

■Line rate: 44.736 Mbps

■Line interface: 75 ohm BNC coax female connectors

DSX-1 Interface

■Line build out: 0 to 655 feet

■Line rate: 1.54 Mbps

■Line code: AMI or B8ZS

■Line interface(s): Dual 64-pin Amp connectors

Clocking

■Network: Receive from DS3 network

■Local: Internally generated

Diagnostics

DS3 Network

■ANSI T1.107 compatible loopbacks

■Line loopbacks

DSX-1 Ports

■Local and network loopbacks

■CSU and NIU loopbacks

Performance Monitoring

Local Network Port Statistics

■Current 15 minute, 24 hour (96 15-minute intervals),

total for 24 hours and cumulative

DSX Ports

■BP

■LOS

■AIS (loop and carrier)

MX2810 M13 Multiplexer

Electrical

■Power: 48 VDC, 30 W

Regulatory Standards

■NEBS Level 3

■FCC Part 15, Class A

■NRTL Safety Listed

Management

VT100 Craft Interface

■DB-9 physical connector

■EIA-232, PC serial port

SNMP/Telnet

■Integrated 10Base-T Ethernet

TL1 Alarming/Editing

■RS-232 X.25 port

■Ethernet

RS-485 Port

■Allows the daisy-chaining of units

Alarms

■External alarm contacts for Critical, Major, and Minor

alarms

■Normally open pinout

■Alarm cutoff switch

Environmental

■Operating temperature: –40ºC to 65ºC

■Storage temperature: –20ºC to 70ºC

■Relative humidity: Up to 95 percent, noncondensing

Ordering Information

Equipment Part #

MX2810 Multiplexer Chassis 1185001L1

MX2810 DS3 Controller Card 1185002L2

MX2810 DC Power Supply Unit 1185003L1

MX2810 Test Access Module 1185005L1

MX2810 Redundant System 4185001L5

MX2810 Nonredundant System 4185001L8

6118500xL1-8C February 2004

M13 Multiplexer

Network DS3 28 T1s/21 E1s

MX2810

Table des matières

Autres manuels ADTRAN Multiplexeur

ADTRAN

ADTRAN T3SU 300 Manuel utilisateur

ADTRAN

ADTRAN ISU 512 Manuel utilisateur

ADTRAN

ADTRAN 1200 Manuel utilisateur

ADTRAN

ADTRAN Total Access 1248 Mode d’emploi

ADTRAN

ADTRAN TDU 120e Manuel utilisateur

ADTRAN

ADTRAN OC-3 Instructions d'installation

ADTRAN

ADTRAN Total Access 3000 Mode d’emploi

ADTRAN

ADTRAN MX2820 Guide de l'utilisateur

ADTRAN

ADTRAN 1200287L1 Manuel utilisateur

ADTRAN

ADTRAN T3SU 300 Manuel utilisateur

ADTRAN

ADTRAN Frameport 768 Manuel utilisateur

ADTRAN

ADTRAN MX2820 Manuel utilisateur

ADTRAN

ADTRAN TOTAL ACCESS MX2800 Manuel utilisateur

ADTRAN

ADTRAN TSU 120 Manuel utilisateur

ADTRAN

ADTRAN MX3216 Manuel utilisateur

ADTRAN

ADTRAN ISU 512E Manuel utilisateur

ADTRAN

ADTRAN TSU LT Manuel utilisateur

ADTRAN

ADTRAN OPTI-6100 LMX Manuel utilisateur

ADTRAN

ADTRAN TSU 610 Manuel utilisateur

ADTRAN

ADTRAN Total Access 3000 Mode d’emploi

ADTRAN

ADTRAN 1202076L1 Manuel utilisateur

ADTRAN

ADTRAN TSU 600 Instructions d'installation

ADTRAN

ADTRAN MX2820 M13 MUX Manuel du propriétaire

ADTRAN

ADTRAN MX2800 M13 Manuel utilisateur

Manuels Multiplexeur populaires d'autres marques

Campbell

Campbell AM416 Manuel utilisateur

Paradyne

Paradyne SIM2000 Manuel utilisateur

Panasonic

Panasonic WJFS616 - SWITCHER Manuel utilisateur

Lanex

Lanex TM-77 Manuel utilisateur

Bosch

Bosch VSS8394/01T Manuel utilisateur

Quark-Elec

Quark-Elec QK-A035 Manuel utilisateur

Elo TouchSystems

Elo TouchSystems E247 Manuel utilisateur

Paradyne

Paradyne Hotwire 8786 Manuel utilisateur

RFL Electronics

RFL Electronics 9508D UCC Manuel utilisateur

Miranda

Miranda AMX-101i Mode d’emploi

ShipModul

ShipModul MiniPlex-AIX NMEA-0183 Manuel utilisateur

GE StoreSafe SDVR-10 Manuel utilisateur

Pickering

Pickering 40-613 Manuel utilisateur

Pickering

Pickering 40-667C Manuel utilisateur

American Fibertek

American Fibertek MTX-8410C Manuel utilisateur

ADC

ADC HiGain ELU-319 5E Manuel utilisateur

Paradyne

Paradyne Hotwire 8774 Manuel utilisateur

American Fibertek

American Fibertek MTX-8810C-SL Manuel utilisateur