ADMETEC Powerlight Butterfly Manuel utilisateur
© 2019-2020 Admetec Solutions ltd. All rights reserved.
PowerLight
Butterfly
Cordless LED light
Instructions for Use
Read this document carefully before using the product.
Table of Contents
2
Table of Contents
Introduction..........................................................................3
Intended Use..................................................................3
About Butterfly................................................................3
Safety Precautions ..............................................................4
Troubleshooting................................................................... 4
Product Overview................................................................5
Battery Charger ..............................................................5
Battery Pack ...................................................................7
Headlight ........................................................................8
Technical Specifications....................................................12
Battery Charger ............................................................ 12
Battery Pack ................................................................. 12
Headlight ...................................................................... 12
Warranty............................................................................13
Warranty Coverage.......................................................13
Exclusions and Limitations ........................................... 13
Butterfly –Instructions for Use
3
Introduction
Intended Use
Butterfly is a cordless headlight system designed to provide
illumination during dental or minor surgical procedures. The
Butterfly is part of the Admetec PowerLight product family.
Using a battery pack gives the user complete portability allowing
unrestricted movement.
About Butterfly
Butterfly is a new generation of cordless dentist and surgeon
head- or loupe-mounted light source featuring:
Narrow, high-power beam
No dazzle effect
Daylight color, ensuring that you see the true color of
teeth and tissues even when natural daylight is not
available
Very light weight
Even light intensity until full battery discharge
Rechargeable Li-Ion-Polymer battery-based battery
packs easily attached to your head light
Easy and fast-changeable batteries connected with
magnets
Low battery audio alert
2 hours of work at maximum light intensity without
switching batteries
3 identical battery packs included in the package –when
one discharges, just switch to the next one
Orange filter to prevent composite curing
The lifetime of the headlight is 10 years
Product overview
4
Safety Precautions
Do not use any third-party chargers with Butterfly Battery
Packs, even if they look identical. Third-party chargers are not
compatible with the battery packs and could damage it.
Prevent battery packs from overheating. Avoid direct sunlight or
heated surfaces.
Prevent battery packs from shock.
Do not use close to explosive or highly flammable materials like
alcohol, methanol, acetone, etc.
Troubleshooting
Issue
Troubleshooting
The light does not work steadily
due to discharged battery
Replace battery pack.
Charge the discharged
battery
Battery does not function
Contact local dealer.
LED failure
Contact local dealer.
Battery overheats or produces
fire during charge.
Contact local dealer.
Battery leakage
Contact local dealer.
Battery swelling
Contact local dealer.
Buttons are stuck
Contact local dealer.
Butterfly –Instructions for Use
5
Product Overview
Figure 1: Butterfly Light Kit
The Butterfly kit includes:
1. Battery Charger
2. Charging cable
3. Charging pad
4. 3 battery packs
5. Headlight
6. External orange filter
7. Screwdriver
Battery Charger
To charge the battery,
Product overview
6
1. Connect Charging pad to charger using the provided
cable.
2. Plug the charger into a wall outlet.
3. Place the battery pack on the charging pad as shown in
Figure 2. It is possible to charge two battery packs
simultaneously.
The charging indicator will light red. The indicator will
change to green, when the battery is fully charged.
Figure 2: Battery Pack connected to Charging pad
Average charging time of an empty battery is 1.5 hours.
Battery packs may remain on the charging pad when not in use. In
this case, the charging pad must be connected to the powered-on
charger.
Butterfly –Instructions for Use
7
Battery Pack
Each Butterfly kit includes 3 battery pack units serving as power
source and control panel for the headlight.
Figure 3: Battery Pack: Top View
Battery packs control –turning the light source ON and OFF. This
function is controlled by touching the area marked in green in
Figure 3.
Figure 3.1: Dimmer
Product overview
8
Dimming the light source in two different intensities is controlled
by touching the area on the right side of the battery, marked in
green on the Figure 3.1.
Figure 4: Connection (Bottom) Panel
Notes
The battery pack supports a constant level of light
intensity during the whole period of discharging. Once
the battery is fully discharged, the light turns off.
Headlight
The headlight is permanently connected to the headlight bracket
that consists of:
headlight cable, connecting the light source to the
battery connection pad
hinge allowing for tilt adjustment of the light direction
battery connection pad
Mechanical connector for mounting the headlight on
frames
Butterfly –Instructions for Use
9
To Use Butterfly:
1. Mount the external orange filter onto the front part of light
source by pushing the outer ring of the filter onto the front
part of the light source as shown in Figure 5.
Figure 5: Mounting External Filter
2. Attach the light source to the mechanical connector on the
loupes frame or on the universal clip as shown in Figure 6
and Figure 7.
Figure 6: Attaching the Headlight Loops Frame
Product overview
10
Figure 7: Light Source Attached To Universal Clip
3. Place the battery pack on the connection pad. The battery
pack must be oriented so that the Butterfly logo faces ahead.
The magnets will align the battery electrodes with the
connection pad.
Note
When attempting to place battery pack in reversed
position, the magnets will not allow it to be attached
to the connection pad.
4. Once the battery pack is aligned, turn your light on.
Figure 8: Butterfly Mounted on Frame
Table des matières
