ADLINK Technology NuPRO-710 Series Manuel utilisateur

NuPRO-710 Series

Full Size Socket-370 All-in-one

PICMG™ Bus Industrial SBC

User’s Guide

Recycled Paper

Manual Rev. 1.00: October 24, 2000

The information in this document is subject to change without prior notice in

order to improve reliability, design and function and does not represent a

commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, special,

incidental,orconsequentialdamagesarisingoutoftheuseorinabilitytouse

the product or documentation, even if advised of the possibility of such

damages.

This document contains proprietary information protected by copyright. All

rights are reserved. No part of this manual may be reproduced by any

mechanical, electronic, or other means in any form without prior written

permission of the manufacturer.

Trademarks

NuPROis registered trademark of ADLINK Technology Inc.

Other product names mentioned herein are used for identification purposes

only and may be trademarks and/or registered trademarks of their respective

companies.

Getting service from ADLINK

♦Customer Satisfaction is always the most important thing for ADLINK

Tech Inc. If you need any help or service, please contact us and get it.

ADLINK Technology Inc.

htt

p://www.

dlink.com.tw

Web Site

http://www.adlinktechnology.com.tw

Sales & Service

[email protected]

Technical NuDAQ [email protected]

Support NuDAM [email protected]

NuIPC [email protected]w

NuPRO [email protected]

Software [email protected]

AMB [email protected]

TEL +886-2-82265877 FAX +886-2-82265717

Address 9F, No. 166, Jian Yi Road, Chungho City, Taipei, 235 Taiwan, R.O.C.

♦Please inform or FAX us of your detailed information for a prompt,

satisfactory and constant service.

Detailed Company Information

Company/Organization

Contact Person

E-mail Address

Address

Country

TEL FAX

Web Site

Questions

Product Model

¨OS:

¨Computer Brand:

Environment to Use

¨M/B:¨CPU:

¨Chipset: ¨Bios:

¨Video Card:

¨Network Interface Card:

¨Other:

Challenge Description

Suggestions for ADLINK

Table of Contents•i

Table of Contents

Chapter 1 Introduction..............................................................1

1.1 FEATURES ......................................................................................................1

1.2 The NUPRO-710 Package ..........................................................................3

1.3 Board Layout, Jumpers and Connectors...............................................4

Chapter 2 Installation................................................................6

2.1 Static Electricity Precautions ...................................................................6

2.2 Installation Steps .........................................................................................7

2.3 CPU Type and BUS Clock Speed Selector .............................................7

2.4 RTC Clear CMOS Memory: JP9.................................................................9

2.5 Set DOC Memory base address...............................................................9

2.6 Watchdog Timer setting...........................................................................10

2.7 System Memory Installations .................................................................11

2.8 Expansion Card installations ..................................................................11

Chapter 3 Connectors.............................................................13

3.1 CPU/CHASSIS FAN Connector.................................................................13

3.2 IRCON Connector .......................................................................................14

3.3 LCD Connector............................................................................................14

3.4 USBP Connector.........................................................................................15

3.5 ATX Connector............................................................................................15

3.6 PS-ON Switch..............................................................................................16

3.7 KEY Lock Connector..................................................................................16

3.8 Speaker Connector ...................................................................................17

3.9 Reset Switch Connector ..........................................................................17

3.10 Power LED Connector...............................................................................18

3.11 SMI LED Connector....................................................................................18

3.12 SMI Switch Connector ..............................................................................19

3.13 IDE_LED........................................................................................................19

3.14 Internal KB Connector...............................................................................20

3.15 Primary, Secondary IDE Connector.......................................................20

3.16 Parallel Printer Connector.......................................................................21

3.17 Floppy drive connector .............................................................................21

3.18 COM2 Connectors......................................................................................22

3.19 COM1 Connector (9-pin female).............................................................22

3.20 PS/2 Mouse Connector (6-pin female)..................................................23

3.21 PS/2 KB Connector (6-pin female).........................................................23

ii •Table of Contents

3.22 VGA Connector ...........................................................................................24

3.23 RT1: Hardware Monitoring connector...................................................24

Chapter 4 BIOS Setup.............................................................25

4.1 UPDATING NUPRO-710 BIOS (Software Flash)...................................25

4.2 Standard CMOS Setup..............................................................................28

4.3 BIOS Features Setup.................................................................................32

4.4 Intel 440BX Chipset Features Setup......................................................35

4.4.1 Cache Features...................................................................................37

4.4.2 PCI and IDE Configuration.................................................................37

4.5 Power Management Setup......................................................................39

4.5.1 PM Timers............................................................................................40

4.5.2 Reload Global Timer Events.............................................................42

4.6 Intel 440BX PnP/PCI Configuration Setup............................................42

4.7 Load BIOS Defaults....................................................................................44

4.8 Load Setup Defaults..................................................................................45

4.9 Integrated Peripherals..............................................................................46

4.10 Setting Supervisor & User Passwords ................................................49

4.11 IDE HDD Auto Detection............................................................................50

4.13 Save and Exit Setup...................................................................................51

Chapter 5 ATI 3D RagePro XL Features...............................52

5.1 General Features........................................................................................52

5.2 Integrated TMDS.........................................................................................53

5.3 Digital Flat Panel Monitor Support..........................................................53

5.4 LCD Panel Control......................................................................................53

5.5 ACPI Power Management........................................................................54

5.6 AGP 2X mode..............................................................................................54

5.7 Floating-Point Set-up Engine ...................................................................55

5.8 125MHz SGRAM..........................................................................................55

5.9 2D Acceleration..........................................................................................56

5.10 3D Acceleration..........................................................................................56

5.11 Motion Video Acceleration.......................................................................58

5.12 Software Features.....................................................................................59

Introduction •1

Introduction

This manual explains how to use this SINGLE-BOARD COMPUTER board and

install upgrades. It has an overview of the design and features of the board

and provides useful information if you want to change the configuration of

the board, or a system it is installed in.

The NUPRO-710 Single-board Computer is designed as an All-In-One

complete system. Plugged into a passive backplane. The NUPRO-710 will

be compatible with PICMG Ver 2.0 PCI/ISA Standard and Intel PCI

Ver.2.0/2.1 compliant.

Upgrading your system with a high performance, without the high cost. For

industrialuserswhoneedmoreprocessingpower,itisperfectasabuilding

blockfortheIPCworkstationusedforfactory automation, data acquisition or

distributed process control.

The perfect choice for building a LAN server, a High-End workstation a

multi-user or industry PC system.

1.1 FEATURES

TheADLINKNUPRO-710iscarefullydesigned forthedemandingIndustrial

PC user who wants great many features in a small package. This

Single-board Computer:

lEasyInstallation:IsequippedwithBIOSthatsupportsautodetectionof

hard drives, PS/2 mouse, and Plug and Play devices to make setup of

hard drives, expansion cards, and other devices virtually automatic.

lIntelProcessor:SupportsoneCeleronPPGACPUandIntelPentiumIII

FC-PGA CPU (Coppermine core) onSocket 370.

lIntelAGPset:FeaturesIntel's440BXAGPsetswithI/Osubsystemsand

Intel's FSB (Front-Side Bus) platform, which boasts a 100/66MHz

internal bus speed.

lUSB Interface:Supports the Universal Serial Bus.

2•Introduction

lIrDA Connector: Supports an infrared port module for wireless

interface.

lATI Rage Pro XL Graphics Controllers (only for NUPRO-710):

On-board64-bitgraphicsaccelerator with support for Digital Flatpanel

monitors and superior support for 3D and motion video, with 8MB

SGRAM.

lDesktopManagementInterface (DMI):SupportsDMIthroughBIOSthat

allowshardwareto communicatewithinastandardprotocolcreatinga

higher level of compatibility.

lVersatile SDRAM Memory Support: Is equipped with three DIMM

sockets to support (8MB, 16MB, 32MB, 64MB, 128MB, 256MB)

SDRAM/EDO 168-pin memory module.

lSuper Multi-I/O (Winbond 83977TF_AW Chipset): Provides two

high-speed UART compatible serial ports and one parallel port with

EPP and ECP capabilities. UART2 can also be directed from COM2 to

the Infrared Module for wireless connections. Two floppy drives of

either 5.25" or 3.5" (1.44MB or 2.88MB) are also supported without an

external card.

lH/W monitoring: Winbond 83781D Chipset, monitoring (+/-)Voltage,

System Temperature and fan speed.

lReady-to-UseConnectors:Is equipped with onboard Parallel(Printer)

Port, Serial Ports (COM1&2), PS/2 Mouse, and PS/2 Keyboard

connectors without the need for extra cables and brackets.

lPCI Bus Master IDE Controller: Comes with an onboard PCI Bus

Master IDE controller with two connectors that supports four IDE

devices in two channels, provides faster data transfer rates, and

supports Enhanced IDE devices such as Tape Backup and CD-ROM

drives. This controller supports UltraDMA/33, PIO Modes 3 and 4 and

BusMasterIDE DMA Mode 2. BIOSnowsupport IDE CD-ROM or SCSI

boot-up.

lPICMGCompatible:32 bitsPCI-ISA CARD EDGE Connector supports

32-bit BusMaster 4 x PCI Expansion slots and 16-bit ISA Expansions

slots.

lWatchdog Timer: The function can generate a system reset. Jumper

configurable to always disable or software programmable

enable/disable. The timer interval is 10-80sec.

lUses I/O ports hex 043and 443 to control the watchdog timer.

lDMA channels: 7

lInterrupt levels: 15

lPhysical Size: 13.33" x 4.8"

lPower Requirement: +5V/4.5AMPS.

Table des matières

Autres manuels ADLINK Technology Ordinateur monocarte

ADLINK Technology

ADLINK Technology NuPRO-841 Manuel utilisateur

ADLINK Technology

ADLINK Technology aTCA-81514PA Manuel utilisateur

ADLINK Technology

ADLINK Technology NuPRO-770 Series Manuel utilisateur

ADLINK Technology

ADLINK Technology LEC-BASE 2.0 Manuel d'utilisation et d'entretien

ADLINK Technology

ADLINK Technology cPCI-6880 Series Manuel utilisateur

ADLINK Technology

ADLINK Technology NuPRO-E340 Manuel utilisateur

ADLINK Technology

ADLINK Technology NuPRO-720 Manuel utilisateur

ADLINK Technology

ADLINK Technology PC/104-Plus Manuel utilisateur

ADLINK Technology

ADLINK Technology NuPRO-796 Series Manuel utilisateur

ADLINK Technology

ADLINK Technology LEC-IMX6R2 Manuel utilisateur

ADLINK Technology

ADLINK Technology NuPRO-851 Manuel utilisateur

ADLINK Technology

ADLINK Technology cPCI-6841 Series Manuel utilisateur

ADLINK Technology

ADLINK Technology CM1-86DX3 Manuel d'utilisation et d'entretien

ADLINK Technology

ADLINK Technology ReadyBoard 620 Manuel utilisateur

ADLINK Technology

ADLINK Technology NuPRO-780 Series Manuel utilisateur

ADLINK Technology

ADLINK Technology LEC-BT Manuel d'utilisation et d'entretien

ADLINK Technology

ADLINK Technology NuPRO-E43 Manuel utilisateur

ADLINK Technology

ADLINK Technology NuPRO-860 Series Manuel utilisateur

ADLINK Technology

ADLINK Technology ReadyBoard 850 Manuel utilisateur

ADLINK Technology

ADLINK Technology cPCI-3600 Series Manuel utilisateur

ADLINK Technology

ADLINK Technology cPCI-6840 Series Manuel utilisateur

ADLINK Technology

ADLINK Technology cPCI-6910VS/M2G Manuel utilisateur

Manuels Ordinateur monocarte populaires d'autres marques

WIN Enterprises

WIN Enterprises PL-80910 Manuel utilisateur

AXIOMTEK

AXIOMTEK SBC81206 Series Manuel utilisateur

Embest

Embest SOM-PH8800 Manuel utilisateur

SeaLevel

SeaLevel SBC-R9 Manuel utilisateur

SMART Embedded Computing

SMART Embedded Computing ATCA-8310 Manuel utilisateur

WinSystems

WinSystems PPM-LX800-G Manuel utilisateur

GIGAIPC

GIGAIPC QBiX-PPC Series Manuel utilisateur

OLIMEX

OLIMEX A10S-OLinuXino-MICRO Manuel utilisateur

Commell

Commell FS-978 Manuel utilisateur

GIGAIPC

GIGAIPC QBiP-8665A/ Manuel utilisateur

VersaLogic

VersaLogic Python EBX-11 Manuel utilisateur

Micro Computer Specialists

Micro Computer Specialists IRV-3702 Manuel utilisateur

CompuLab

CompuLab SB-A510 Manuel utilisateur

Boser

Boser HS-7321 Manuel utilisateur

Premier Farnell

Premier Farnell Embest SBC8530 Manuel utilisateur

MicroSys Electronics

MicroSys Electronics miriac SBC-LS1043A2 Manuel utilisateur

Aaeon

Aaeon UP Manuel utilisateur

Portwell

Portwell WUX Series Manuel utilisateur