ADJ 3D VISION PLUS Manuel utilisateur

User Instructions

11/17

3D VISION PLUS

5005510

instructions herein are subject to change without notice. ADJ Products, LLC logo and identifying

product names and numbers herein are trademarks of ADJ Products, LLC. Copyright protection

claimed includes all forms and matters of copyrightable materials and information now allowed by

statutory or judicial law or hereinafter granted. Product names used in this document may be

trademarks or registered trademarks of their respective companies and are hereby acknowledged.

All non-ADJ Products, LLC brands and product names are trademarks or registered trademarks of

their respective companies.

ADJ Products, LLC and all aliated companies hereby disclaim any and all liabilities for property,

equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic

loss associated with the use or reliance of any information contained within this document, and/or as

a result of the improper, unsafe, unsucient and negligent assembly, installation, rigging, and opera-

tion of this product.

Europe Energy Saving Notice

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the enviroment. Please turn o all electrical products when

they are not in use. To avoid power consumption in idle mode, disconnect all electrical equipment from power

when not in use. Thank you!

Date Document

Version

DMX

Channel

Modes

Notes

DOCUMENT VERSION

Please check www.adj.com for the latest revision/update of this guide.

10/19/17 1 3/9/13 Initial Release

ADJ Products, LLC - www.adj.com - 3D Vision Plus User Manual Page 2

3D Vision Plus Table of Contents

Introduction

Features

Warranty Registration

Safety Precautions

DMX Channel Mode

System Menu

Operating Instructions

DMX Control

Master-Slave Conguration

Multiple Unit Power Linking

Pixel Conguration Diagram

Mounting and Grouping

Dimensional Drawings

Fuse Replacement

Warranty

Technical Specications

ADJ Products, LLC - www.adj.com - 3D Vision Plus User Manual Page 3

3D Vision Plus Introduction

Unpacking: Thank you for purchasing the 3D Vision Plus by ADJ Products, LLC. Every 3D Vision Plus has

been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping

carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully

inspect your xture for any damage and be sure all accessories necessary to operate the unit has arrived intact.

In the case damage has been found or parts are missing, please contact our toll free customer support number

for further instructions. Do not return this unit to your dealer without rst contacting customer support.

Introduction: The 3D Vision Plus is a Hexagonal shaped LED panel with stunning 3D visual effects when used

in multiples. This LED panel is controlled via manual control or DMX control. Kling-Net or Art-Net can be used

when used with EZ Kling. Dynamic effects can be played on it, which makes it a great lighting system for DJ’s

and night clubs.

Customer Support: ADJ Products, LLC provides a toll free customer support line, to provide set up help

and to answer any question should you encounter problems during your set up or initial operation. You may

also visit us on the web at www.adj.com for any comments or suggestions. Service Hours are Monday through

Friday 8:00 a.m. to 4:30 p.m. Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: [email protected]

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, doing so

will void your manufactures warranty. In the unlikely event your unit may require service please contact ADJ

Products, LLC.

PLEASE recycle the shipping carton when ever possible.

3D Vision Plus Features

• Multi-Colors

• Electronic Dimming 0-100%

• Built in Microphone

• DMX-512 protocol

• CAT 5 Straight Network Cable included.

• 72 x 5050 SMD 3-in-1 RGB LED’s

• Safety Cable Included

• Three DMX Modes: 3 Channel Mode, 9 Channel Mode, and 13 Channel Mode.

• Multiple Unit Power Linking (See page 13)

3D Vision Plus Warranty Registration

The 3D Vision Plus carries a 2 year limited warranty. Please fill out the enclosed warranty card to

validate your purchase. All returned service items whether under warranty or not, must be freight pre-

paid and accompany a return authorization (R.A.) number. The R.A. number must be clearly written on

the outside of the return package. A brief description of the problem as well as the R.A. number must

also be written down on a piece of paper included in the shipping carton. If the unit is under warranty,

you must provide a copy of your proof of purchase invoice. You may obtain a R.A. number by con-

tacting our customer support team on our customer support number. All packages returned to the

service department not displaying a R.A. number on the outside of the package will be returned to the

shipper.

ADJ Products, LLC - www.adj.com - 3D Vision Plus User Manual Page 4

ADJ Products, LLC - www.adj.com - 3D Vision Plus User Manual Page 5

3D Vision Plus Safety Precautions

• To reduce the risk of electrical shock or re, do not expose this unit rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Do not attempt to operate this unit if the power cord has been frayed or broken. Do not attempt to

remove or break o the ground prong from the electrical cord. This prong is used to reduce the risk

of electrical shock and re in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user serviceable parts inside.

• Never operate this unit when it’s cover is removed.

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6”

(15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product outdoors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to be walked on or pinched by

items placed upon or against them, paying particular attention to the point they exit from the unit.

• Cleaning -The fixture should be cleaned only as recommended by the manufacturer. See page 18

for cleaning details.

• Heat -The appliance should be situated away from heat sources such as radiators, heat registers,

stoves, or other appliances (including amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the fixture.

C. The fixture has been exposed to rain or water.

D. The fixture does not appear to operate normally or exhibits a marked change in performance.

E. The fixture has fallen and/or subjected to extreme handling.

ADJ Products, LLC - www.adj.com - 3D Vision Plus User Manual Page 6

3D Vision Plus 3 Channel Mode

Channel Value Function

1 RED

0 - 255 0% - 100%

2 GREEN

0 - 255 0% - 100%

3 BLUE

0 - 255 0% - 100%

3D Vision Plus 9 Channel Mode

Channel Value Function

1 RED 1

0 - 255 0% - 100%

2 GREEN 1

0 - 255 0% - 100%

3 BLUE 1

0 - 255 0% - 100%

4 RED 2

0 - 255 0% - 100%

5 GREEN 2

0 - 255 0% - 100%

6 BLUE 2

0 - 255 0% - 100%

7 RED 3

0 - 255 0% - 100%

8 GREEN 3

0 - 255 0% - 100%

9 BLUE 3

0 - 255 0% - 100%

ADJ Products, LLC - www.adj.com - 3D Vision Plus User Manual Page 7

3D Vision Plus 13 Channel Mode

Channel Value Function

1 RED 1

0 - 255 0% - 100%

2 GREEN 1

0 - 255 0% - 100%

3 BLUE 1

0 - 255 0% - 100%

4 RED 2

0 - 255 0% - 100%

5 GREEN 2

0 - 255 0% - 100%

6 BLUE 2

0 - 255 0% - 100%

7 RED 3

0 - 255 0% - 100%

8 GREEN 3

0 - 255 0% - 100%

9 BLUE 3

0 - 255 0% - 100%

CHANNEL 13 MODE CONTINUED ON THE NEXT PAGE

ADJ Products, LLC - www.adj.com - 3D Vision Plus User Manual Page 8

3D Vision Plus 13 Channel Mode

Channel Value Function

10 COLOR MACROS

0 OFF

1 - 7 ALL RED (STATIC)

8 - 14 ALL GREEN (STATIC)

15 - 21 ALL BLUE (STATIC)

22 - 28 ALL YELLOW (STATIC)

29 - 35 ALL CYAN (STATIC)

36 - 42 ALL MAGENTA (STATIC)

43 - 49 RGB CHASE

50 - 57 BLUE, CYAN, & MAGENTA CHASE

58 - 64 MAGENTA, YELLOW, & WHITE CHASE

65 - 71 YELLOW & MAGENTA CHASE

72 - 78 BLACK & BLUE CHASE

79 - 85 RGB FADE

86 - 92 RGBYCMW FADE

93 - 99 YELLOW & BLUE CHASE

100 - 106 RED & CYAN CHASE

107 - 113 GREEN & MAGENTA CHASE

114 - 120 ALL COLORS RANDOM

121 - 127 SOUND ACTIVE RED

128 - 134 SOUND ACTIVE GREEN

135 - 141 SOUND ACTIVE BLUE

142 - 148 SOUND ACTIVE YELLOW

149 - 155 SOUND ACTIVE CYAN

156 - 162 SOUND ACTIVE MAGENTA

163 - 169 SOUND ACTIVE RGB CHASE

170 - 177 SOUND ACTIVE BLUE, CYAN, & MAGENTA CHASE

178 - 184 SOUND ACTIVE MAGENTA, YELLOW & WHITE CHASE

185 - 191 SOUND ACTIVE YELLOW & MAGENTA CHASE

192 - 198 SOUND ACTIVE BLACK & BLUE CHASE

199 - 205 SOUND ACTIVE RGB FADE

206 - 212 SOUND ACTIVE RGBYCMW FADE

213 - 219 SOUND ACTIVE YELLOW & BLUE CHASE

220 - 226 SOUND ACTIVE RED & CYAN CHASE

227 - 233 SOUND ACTIVE GREEN & MAGENTA CHASE

234 - 240 SOUND ACTIVE ALL COLORS

241 - 255 NO FUNCTION

CHANNEL 13 MODE CONTINUED ON THE NEXT PAGE

ADJ Products, LLC - www.adj.com - 3D Vision Plus User Manual Page 9

3D Vision Plus 13 Channel Mode

Channel Value Function

11 MACRO SPEED/SOUND SENSITIVITY

0 - 255 MACRO SPEED SLOW - FAST

0 - 255 SOUND SENSITIVITY LESS - MORE

12 STROBING/LEDS ON/OFF

0 - 31 LED OFF

32 - 63 LED ON

64 - 95 STROBING SLOW - FAST

96 - 127 LED ON

128 - 159 PULSE STROBING SLOW - FAST

160 - 191 LED ON

192 - 223 RANDOM STROBING SLOW - FAST

224 - 255 LED ON

13 MASTER DIMMER

0 - 255 0% - 100%

Table des matières

Autres manuels ADJ Équipement d'éclairage

ADJ

ADJ INNO POCKET Z4 Manuel utilisateur

ADJ

ADJ PinPoint Go WW Plus Manuel utilisateur

ADJ

ADJ PINPOINT GO TW Manuel utilisateur

ADJ

ADJ MEGA BEAM BAR Manuel utilisateur

ADJ

ADJ VIZI WASH Z19 Manuel utilisateur

ADJ

ADJ InnoSpotLED Manuel utilisateur

ADJ

ADJ Lightning COB Cannon Manuel utilisateur

ADJ

ADJ Flat Par CWWW9 Manuel utilisateur

ADJ

ADJ HYDRO WASH X19 Manuel utilisateur

ADJ

ADJ ENCORE LB15IP Manuel utilisateur

ADJ

ADJ X-MOVE LED PLUS Manuel utilisateur

ADJ

ADJ COB CANNON LP200 Manuel utilisateur

ADJ

ADJ MEGA PAR PROFILE PLUS Manuel utilisateur

ADJ

ADJ MOD QA60 Manuel utilisateur

ADJ

ADJ Pro Par56 CWWW Manuel utilisateur

ADJ

ADJ Spherion WH LED Manuel utilisateur

ADJ

ADJ ENCORE BURST 100IP Manuel utilisateur

ADJ

ADJ Spherion Tri LED Manuel utilisateur

ADJ

ADJ Vizi Beam Hybrid 2R Manuel utilisateur

ADJ

ADJ FREQ Matrix Manuel utilisateur

ADJ

ADJ QUAD SCAN PRO Manuel utilisateur

ADJ

ADJ INNO POCKET Z4 Manuel utilisateur

ADJ

ADJ INNO POCKET BEAM Q4 Manuel utilisateur

ADJ

ADJ WOLFMIX WMX1 Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur