ADInstruments AD8660 Series Manuel utilisateur

AD INSTRUMENTS

AD8660 Series Fully Numerical Control

Dual Channel Function/Arbitrary Waveform Generator

User’s Manual

Rev1.0 May,2019

AD INSTRUMENTS

AD8660 Series User’s Manual I

Guaranty and Declaration

Declaration

● AD INSTRUMENTS reserves the right to modify or change parts of or

all the specifications and pricing policies at company’s sole decision.

● Information in this publication replaces all previously corresponding material.

● AD INSTRUMENTS shall not be liable for losses caused by either

incidental or consequential in connection with the furnishing, use or

performance of this manual as well as any information contained.

●Any part of this document is forbidden to be copied or photocopied or

rearranged without prior written approval of AD INSTRUMENTS.

If you have any problem or requirement when using our products or this

manual, please contact AD INSTRUMENTS.

Tel： 0034 916613037 E-mail：info@adinstruments.es

Website：www.adinstruments.es

AD INSTRUMENTS

II AD8660 Series User’s Manual

Contents

Guaranty and Declaration .................................................................................... I

Product Introduction ........................................................................................... 4

Quick Start ........................................................................................................... 7

General Inspection .......................................................................................... 7

Front Panel Overview ...................................................................................... 8

Back Panel Overview .................................................................................... 10

Power On and Inspection .............................................................................. 11

User Interface ................................................................................................ 12

Appearance and Dimensions .......................... ¡Error! Marcador no definido.

Front Panel Operations ..................................................................................... 15

Waveform Output .......................................................................................... 15

Select Output Channel ............................................................................................ 15

Select Waveform ..................................................................................................... 16

Set Frequency ......................................................................................................... 17

Set Amplitude .......................................................................................................... 18

Set Offset ................................................................................................................ 19

Set Duty Cycle (Rectangle)&Set pulse wave pulse width (Adj-Pulse) ................. 20

Set Phase ................................................................................................................ 21

Enable Output ......................................................................................................... 22

Example：Output Sine Waveform .......................................................................... 23

Burst .......................................................................................................... 25

Modulation Function .................................................................................. 25

Frequency Meter/Counter ............................................................................. 27

Enable the Counter ................................................................................................. 27

Set the Counter ....................................................................................................... 28

Sweep ........................................................................................................... 29

Sweep Object .......................................................................................................... 29

Sweep Start Position ............................................................................................... 30

Sweep End Position ................................................................................................ 31

VCO (Voltage Control Output) Sweep ..................................................................... 32

Sweep Type ............................................................................................................. 33

Enable Sweep Function .......................................................................................... 34

System Configuration and Auxiliary Functions .............................................. 35

Save and Load ........................................................................................................ 36

Configuration ........................................................................................................... 37

Uplink ...................................................................................................................... 38

Synchronization ....................................................................................................... 39

Troubleshooting ................................................................................................ 40

Technical Specification ..................................................................................... 41

Appendix ............................................................................................................ 46

AD INSTRUMENTS

AD8660 Series User’s Manual III

AD INSTRUMENTS

4 AD8660 Series User’s Manual

Product Introduction

This manual applies to each model of AD8660series Function/Arbitrary

Waveform Signal Generator.

AD8660 Dual-channel Function / Arbitrary waveform generator is a set of

Function Signal Generator, Arbitrary Waveform Generator, Pulse Generator,

Analog / Digital modulator, VCO, Sweep, Counters and Frequency Meter and other

functions in a high Performance, cost-effective, multi-function signal generator.

Abundant shortcut keys and graphical user interface simplifies every operation.

Users do not have to spend a lot of time to learn and familiar with the operation of

the instrument, you can be skilled use. For education, research and development,

production, testing, maintenance and other industries to provide a new choice.

The instrument adopt the Direct Digital Synthesizer (DDS) technology and

provide stable, precise, pure and low distortion signals. Surface mounting

technology improves interference immunity and operational life span. Can output

up to 97 groups of functions / arbitrary waveform, contains 33 groups of preset

waveforms and 64 groups of user-defined waveforms. Preset waveforms: Sine,

Square, Rectangle (Duty Cycle adjustable), Pulse (Pulse width and cycle time can

be set accurately), Triangle/Ramp, CMOS(0~12V), Four channels TTL,

Exponential Rise, Exponential Fall, Noise, ECG, DC etc.

AD INSTRUMENTS

AD8660 Series User’s Manual 5

Main Features:

u Adopt the Direct Digital Synthesizer (DDS) technology and provide stable,

precise, pure and low distortion signals.

u 2.4 inch TFT Color LCD with 320×240 resolution, displaying parameters and

graphics of the two channels at the same time.

u The instrument uses 14-bit high-speed D/A converter chip (5Vpp output

quantization error is less than 1mV), 250MSa/s sample rate, 14bits vertical

resolution.

u Can output up to 97 groups of functions / arbitrary waveform, contains 33

groups of preset waveforms and 64 groups of user-defined waveforms. Preset

waveforms: Sine, Square (Duty Cycle adjustable), Pulse (Pulse width and

cycle time can be set accurately), Triangle/Ramp, CMOS(0~12V), Four

channels TTL, Exponential Rise, Exponential Fall, Noise, ECG, DC etc.

u Enable to store 64 arbitrary waveform data files, each one of waveform storage

depth 8192 points * 14bits;

u Various modulation types: AM, FM, PM, ASK, FSK and PSK modulations.

u Sweep Function: It can sweep 4 properties of signals including frequency,

amplitude, offset and duty cycle; It has Linear and Logarithm two sweep types;

0.01S~999.99S sweep time; Up, Down and roundtrip sweep directions.

u VCO Function (Voltage Control Output): Can be achieved by an external input

signal: voltage controlling frequency, voltage controlling amplitude, voltage

controlling offset, voltage controlling duty cycle and PWM modulations.

u Burst Output Function: There has Manual Trigger, internal CH2 Trigger, and

External Trigger for your options. It can output 1~1048575 pulse trains.

u 100M Frequency meter function: It can measure frequency, period, pulse width

and duty cycle. Max. frequency workable is 100MHz and Min. frequency

workable is 0.01 Hz.

u Counter Function: It has 2 coupling measure modes including DC coupling and

AC coupling. This design can solve inaccuracy problem of AC coupling.

u Standard dual full functional channels which are equivalent to two independent

generators.

u Channel SYNC Function: Support waveform copy and state copy between

channels.

u Support two or more signal generators connected to achieve multi-channel

output, the maximum support 16-channel synchronous output, the phase

between each channel can be adjusted.

AD INSTRUMENTS

6 AD8660 Series User’s Manual

u Precisely adjust the phases of the two channels, Precision can be 0.01°.

u Minimum amplitude resolution can be up to 1 mV. Amplitude range is 0~20Vpp.

u Duty-cycle of each channel can be adjusted independently0.01%-99.99%, the

adjusting resolution is 0.01%.

u -12V~+12V DC Offset function. Resolution 0.001V.

u Save function: It can save 20 sets user-set parameters and can be loaded at

any time.

u Communicating function: All functions can be controlled by PC program and

the communication protocol is open for secondary development.

u Output short-circuit protection: All channels can work more than 60 seconds

when the load is short-circuited.

u Provide powerful waveform editing PC software. Users can download arbitrary

waveform to this instrument after edit through PC program which is included

in user CD.

u Adopt ABS plastic shell with table type design. Use 100-240V (AC) wide range

voltage power supply.

AD INSTRUMENTS

AD8660 Series User’s Manual 7

Quick Start

General Inspection

Please follow the items below when you receive a new AD8660series

Function/Arbitrary Waveform Generator.

．

Inspect the shipping container for damage

Keep the damaged shipping container or cushioning material until the

contents of the shipment have been checked for completeness and the

instrument has passed both electrical and mechanical tests. The consigner or

carrier shall be liable for the damage to instrument resulting from shipment.

．

Inspect the instrument

In case of any damage, or defect, or failure, notify your AD INSTRUMENTS

sales representative.

．

Check the accessories

Please check the accessories according to the Appendix C ( packing lists). If

the accessories are incomplete or damaged, please contact your AD

INSTRUMENTS sales representative.

AD INSTRUMENTS

8 AD8660 Series User’s Manual

Front Panel Overview

The front panel is divided into several function areas for easy operation.

Item

Function

Description

LCD

2.4 inch TFT（320×240）color LCD. Operation instruction please

check chapter “User Interface”.

Manu

Buttons

F1~F5 buttons are matched with Manu displayed on the LCD. Press

corresponding button to activate submenu represented

Function

Buttons Area

— Press this buttons to switch waveforms among Sine,

Square,Rectangle, Triangle and so on.

— Press this button to switch between frequency meter

and counter to measure frequency, period, duty cycle and

pulse width of external signal output.

— Both DC and AC are workable.

— Gate Time can be 1S, 10S or 100S.

— Dual channels output and measurement function can

work together at same time.

— Can sweep Sine, Square, Arbitrary and so on.

— Can sweep frequency, amplitude, offset and phase.

— 2 sweep types: Linear, Logarithm.

— VCO voltage controls parameters of signal output

available (for example: voltage controlled oscillator).

— Auxiliary functions and system configuration setting.

— Can save 20 sets waveform parameters including

frequency, amplitude, offset, phase and so on.

— System Language has English and Chinese for

user’s option.

— Buzzer can be turned on/off in this manu.

— Set multimachine uplink.

— Switch Master-Slave status

— Set default status of dual channels at start-up.

— Trigger and modulation function button

— Set definite amount of pulse string to output.

— Set modulation mode: ASK, FSK, PSK

Table des matières

Manuels Générateur portable populaires d'autres marques

Kohler

Kohler 20EORZ Mode d’emploi

Powerhorse

Powerhorse 83171 Manuel utilisateur

HURST

HURST ML-630-SI Manuel utilisateur

ETQ

ETQ TG4000 Manuel utilisateur

Briggs & Stratton

Briggs & Stratton 40265 Guide de configuration

ConMed

ConMed 7550 Manuel utilisateur

Owon

Owon Waveform Generator Manuel utilisateur

evertz

evertz 7700 Series Manuel utilisateur

Power Stroke

Power Stroke PS906025 Manuel utilisateur

Firefly

Firefly Cygnus CYG2400/460/24 Manuel utilisateur

Draper

Draper PG950S Mise à jour du firmware

PowerBoss

PowerBoss PowerBoss Manuel utilisateur

SDMO

SDMO SH 4000 Manuel utilisateur

EINHELL

EINHELL STE 5500 Manuel utilisateur

Wanco

Wanco WI3000P Manuel utilisateur

Full Boar

Full Boar FBT-3300 Manuel utilisateur

Dwyer Instruments

Dwyer Instruments ASG Manuel utilisateur

Westinghouse

Westinghouse WH1000i Series Manuel utilisateur