Adiant Mobile LifeBeacon Manuel utilisateur

Mobile PERS (Personal Emergency Response System)

Included In This Package:

•The LifeBeacon Mobile PERS Device

•Black Rubber Wrist Band

•Plastic Pendant-Conversion Inserts

and Post-Removal Tool

•UL-listed AC Charging Cradle

•GSM Enabled SIM Card

•Two 3.7V/450mAH Batteries

•Black Neck Lanyard

•Designer Necklace

Initial Charging of the LifeBeacon

Please Follow Instructions Below For Proper Operation of the LifeBeacon

1. Remove the LifeBeacon, Charging

Cradle and A/C Power Adaptor

from Box

DO NOT TURN ON THE

LifeBeacon YET!

2. Plug A/C Adaptor into the

Charging Cradle and A/C Power

Source.

2. Make sure the LifeBeacon is

Correctly Positioned in the

Charging Cradle with the watch

facing front, the SOS Button

facing up. Proper charging will be

indicated by a blue light turning

on inside the SOS button.

3. When the LifeBeacon is fully

charged, the watch face will show

an image of a full battery and a

caption saying “Charging OK”

Show 2 pictures of

1. adaptor plugged

into back of charger

2. adaptor plugged

into wall outlet

2 pictures: top- show

closeup of correctly

placed device in

charger

Bottom-show

incorrect placement

with an X through it

Show picture of

watch face with that

display

Initial Power Up of the LifeBeacon

Please Follow Instructions Below For Proper Operation of the LifeBeacon

1. Remove the fully charged LifeBeacon

from the Charging Cradle .

2. Take the fully charged LifeBeacon

outside under open sky

2. Press and hold the power button on

the lower left side of the LifeBeacon

for at least 3 seconds

3. You will hear a distinctive musical

chime and an instructions to take it

to a clear sky area. The screen will

display “No Signal”

4. When the satellite location has been

determined, the watch face will show

the correct time and date.

5. Your LifeBeacon is now properly

initialized and ready to operate

Initial Test of the LifeBeacon

Please Follow Instructions Below For Proper Operation of the LifeBeacon

1. When testing the LifeBeacon, press and

hold the SOS Button located on the left

side for 3 seconds

2. Your will hear an audible message say

“SOS alert activated, please wait while

we contact emergency assistance”

while you wait for the operator to call

the LifeBeacon.

3. The operator’s phone number will

display on the watch face and the

operator will talk directly to you

through the LifeBeacon.

4. Tell the operator you are simply testing

and they will confirm a successful test.

5. When the operator hangs up the

LifeBeacon display will return to normal

Normal Operation and Charging of the

LifeBeacon

Please Follow Instructions Below For Proper Operation of the LifeBeacon

1. During normal every day wear, the

LifeBeacon operates as a digital

watch which will display the time

and date.

2. The LifeBeacon battery can last up to

48 hours but should be charged on a

daily basis (suggested during sleep)

to ensure functionality when being

worn.

3. When the LifeBeacon battery gets

too low, an audible reminder

message will say “Your Battery is

low, please place the device in the

charger provided”

4. The SOS alert button can be used

while charging

5. The LifeBeacon can be worn during

all typical daily activities including

normal washing and bathing.

Using the the LifeBeacon in an Emergency

Please Follow Instructions Below For Proper Operation of the LifeBeacon

1. DON’T PANIC - Press and hold the SOS

Button located on the left side for 3

seconds

2. Your will hear an audible message say

“SOS alert activated, please wait

while we contact emergency

assistance”

3. At the same time, a message will be

sent to your emergency contacts

informing them of your alert.

4. The operator’s phone number will

display on the watch face and the

operator will talk directly to you

through the LifeBeacon.

5. Speak clearly to the operator. Explain

the situation. Even if you are unable

to speak, the operator will attempt to

locate your position using GPS and

dispatch emergency response to your

location.

Please Follow Instructions Below For Proper Operation of the LifeBeacon

False alarms result if you accidentally activate your the LifeBeaconas if it were a

real medical emergency.

1. DON’T PANIC

2. WAIT FOR AN OPERATOR

3. Explain it was an accident

False alarms should be avoided, but if they happen,

the LifeBeacon is designed so you can communicate

directly with the operator to avoid accidental

dispatch.

Accidental Activation of the LifeBeacon

Wearing the LifeBeacon(Pendant)

The LifeBeacon easily attaches

to the included lanyard to be

worn as a pendant around the

neck.

Attach the included lanyard to

the LifeBeacon by slipping the

lanyard loop through the

opening located at the top of

the LifeBeacon.

I Wearing the LifeBeacon(Watch)

It is recommended that a loved one or care

giver assist the user to prepare the

LifeBeacon to be worn as a watch.

1. Turn “OFF” the LifeBeacon by pressing

the POWER button on the lower left side

twice and hold for seven seconds or until

you hear a chime and the display goes

blank.

Continued Wearing of the LifeBeacon(Watch)

2. Insert the Post Removal Tool into the

post slots located at the top and

bottom of the LifeBeacon and

firmly press the Post Removal Tool

through the slot openings to push out

the posts

3. Remove the Plastic Blanks located at

the top and bottom of the the

LifeBeacon please keep the plastic

blanks in order to reinstall for the

purpose of wearing the LifeBeacon as

a pendant in the future if need be.

4. Place Long Watch Band into the top

bracket of the LifeBeacon and begin

sliding post through the slot opening

and Long Watch Band . Use the Post

Removal Tool to secure it in place.

5. Repeat step 5 using the Short Watch

Band to secure it to the bottom of the

the LifeBeacon

6. Properly secure the LifeBeacon on to

the wrist to wear it as a watch

Show tool pushing

out posts

Show this picture

Changing Battery of the LifeBeacon

Please Follow Instructions Below For Proper Operation of the LifeBeacon

If the LifeBeacon battery dies and recharging is not

feasible, an extra battery has been provided for such a

situation. It is recommended that you be assisted by a

loved one or care giver to change the battery.

1. Turn the LifeBeacon over so you are

looking at the back and orient it so the

power button is located on the upper

left side and the thumb grip is on the

right side of the battery cover.

2. Place your thumb on the battery

cover and slide the battery cover to

the right.

3. Tilt the top of the battery cover

towards you and remove.

4. Lift the battery out by using the

battery tab on the left side of the

battery.

5. Place charged battery in the battery

slot with the writing on the battery

facing you and the battery tab on the

left. Press battery into place.

6. Replace the battery cover as it was

removed.

7. Take the LifeBeacon outside under an

open sky and follow the directions

found in Initial Power Up of the

LifeBeacon to reinitialize GPS signal.

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur