Adey MagnaCleanse Manuel utilisateur
Advanced Central Heating System Flushing
User Guide for Combination
and Sealed Systems
CAUTION:
MagnaCleanse RapidFlush®filters contain a strong magnet. Keep away from
all electrical devices, bank cards and other magnetic devices.
MagnaCleanse RapidFlush filters contain a strong magnet. Caution should be
taken at all times when handling if you have a pacemaker fitted.
MagnaCleanse RapidFlush filters. Always release pressure before servicing.
MagnaCleanse system will be hot in operation. Handle with care.
A MagnaCleanse RapidFlush filter MUST be used when carrying out a
system flush with a MagnaCleanse.
Installation of MagnaClean®filters and carrying out a system flush with a
MagnaCleanse should only be undertaken by competent installers. If in any
doubt consult a qualified heating engineer.
Monitor the MagnaCleanse system throughout operation.
Check jubilee clips are secure before and during operation
For the most up to date version of the MagnaCleanse User Guide visit adey.
com. Warranty Terms & Conditions can be found at adey.com
Test MaintainProtectMagnaCleanMagnaCleanseClean
Important
MagnaCleanse delivers a fast and effective flushing process for central heating systems.
The process involves ADEY’s proven and award-winning MagnaClean technology.
MaganCleanse system contents, including:
•MagnaCleanse RapidFlush filter
•VibraClean®radiator agitator
•MagnaCleanse adaptor kit
•MagnaCleanse hose-to-valve connector
•Hose lengths (x2)
•Hose clamps (x6)
•Female camlocks (x2)
•Tri-clamps (x2)
•Drain valve
You will also need MagnaClean domestic filter
To achieve the best protection for the boiler, it is important that the flushing process is
carried out with the MagnaCleanse hose-to-valve connector attached to the return pipe of
the system.
For maximum effect it is recommended that cleaner is added for a minimum of 1 hour:
MC3+®- Leave for up to 28 days.
MC5®- Leave for up to 7 days.
The following instructions are designed to assist engineers in the safe and effective
operation of the MagnaCleanse process.
These instructions are for combination/closed heating systems. If the system is an open
vented system, please refer to the MagnaCleanse User Guide for Open Vented systems.
Product Overview
Complete all relevant preliminary
electrical safety checks to boiler and
pipework to confirm safe isolation
and earth path.
Isolate central heating system and
drain.
If a MagnaClean filter is installed,
remove the filter. Do not remove the
valves.
Attach the MagnaCleanse hoses
between the RapidFlush Filter and the
MagnaCleanse HTV connector.
Attach MagnaCleanse HTV connector
to the isolation valve on the pipework,
using the appropriate adaptor.
Ensure drain valve is in lower hose.
N.B. The flow through MagnaCleanse
RapidFlush filter should enter the
bottom right and exit top left.
Turn OFF isolation valves on the
RapidFlush filter. Loosen and remove
the lid assembly from one of the
RapidFlush filter canisters.
Removal of black iron oxide and non-
magnetic material for combination/sealed
systems
1
2
3
4
Step-by-step
Check jubilee clips are secure
before and during operation.
Add a suitable cleaner, such as MC5®,
to the system via the RapidFlush Filter
canisters.
If this has already been added, skip this
step.
Turn ON isolation valves on the
RapidFlush Filter. Re-fill and pressurise
the central heating system ensuring the
radiators are half-full. Check for leaks.
Turn on central heating system. Make
sure all radiator valves are fully open.
The radiators should be hot at the
bottom, cold at the top. Allow system to
reach temperature (over 70°C).
Turn off any bypass valves and all the
radiators, ensuring they are FULLY
closed. Leave the furthest radiator
open. With the system running, use
ADEY Vibraclean tool attached to an
SDS drill, set to hammer only mode with
no rotary action, agitate open radiator
for 15-20 seconds, along the bottom of
the radiator. Repeat process on each
radiator, moving from furthest away
radiator to radiator closest to the boiler.
5
6
7
8
Step-by-step
Remember to monitor the MagnaCleanse throughout operation.
ON
Isolate and clean the RapidFlush filter
as required. Using Personal Protective
Equipment i.e. gloves and paper
towels, wipe off any magnetite into a
bucket. Waste should be bagged and
thrown away. When satisfied, open up
the next radiator, turn off the treated
radiator and repeat the process until all
radiators are clean.
Sludge removal tool available at
adeyspares.co.uk.
Set the boiler control to OFF. Attach a
drain hose to the MagnaCleanse drain
valve and secure with jubilee clip.
Turn OFF the HTV connector isolation
valve 2 on the return pipe to the boiler,
leaving the HTV isolation valve 1 open.
10
11
12
Check jubilee clips are secure
before and during operation.
Step-by-step
Continue the VibraClean radiator
agitation to dislodge any sludge
deposits until the return hose to the
RapidFlush filter runs clear.
9
Turn on the central heating system
and re-set controls to the customer
requirements. Open any bypass valves
previously closed. Commission the
system following the manufacturer’s
instructions. Before leaving the
property, carry out the final job –
service MagnaClean filter ensuring a
final check is carried out for leaks.
Check that all radiators and bypasses
are turned OFF, leaving the furthest
radiator from the boiler open. Turn on
the filling loop and allow the mains
water to flush through the system. Allow
the water to drain out to a convenient
point outside until clear. When
complete, fill and vent the radiator and
allow to circulate. Always open up the
next radiator before turning off the
cleansed radiator. Repeat this process
on each radiator until system flushing is
complete.
13
Turn off the filling loop and HTV
connector isolation valve 1, drain and
remove MagnaCleanse assembly.
All the radiators should now be full.
Reinstall/Install the MagnaClean filter
to system.
N.B Refer to MagnaClean installation
instructions.
14
Add a suitable inhibitor, such as MC1+®,
into the canister. i.e. use the pro-fill
bleed valve or remove canister lid
assembly and dose filter. Open up the
isolation valves and remove any air by
venting using filter air vent.
15
16
Remember to monitor the MagnaCleanse throughout operation.
M01924 LF2-01-03189 v1
Telephone: +44 1242 546717 Email: info@adey.com
adey.com
Produced from recycled material
A carbon neutral company
For the most up-to-date version of installation and serving instructions visit www.adey.com
All ADEY marks are trademarks of Adey Holdings (2008) Limited. Please visit adey.com/trademarks for a list of ADEY marks
Copyright Adey Holdings (2008) Limited © 2019. All rights reserved.
Autres manuels pour MagnaCleanse
1
Table des matières
Autres manuels Adey Système de filtration d'eau
Adey
Adey MagnaClean Professional3 Sense Manuel utilisateur
Adey
Adey MagnaClean Professional3 Sense Manuel utilisateur
Adey
Adey MagnaClean Micro 2 Guide de l'utilisateur
Adey
Adey MagnaClean Atom Manuel utilisateur
Adey
Adey MagnaClean Professional2 Manuel utilisateur
Adey
Adey MagnaClean Professional Guide de l'utilisateur
Adey
Adey MagnaClean Atom Manuel utilisateur
Adey
Adey MagnaClean Professional2XP Manuel utilisateur
Adey
Adey MagnaCleanse Manuel utilisateur
Adey
Adey MagnaClean HP Manuel utilisateur
Adey
Adey MagnaClean Micro3 Sense Manuel utilisateur
Adey
Adey MagnaClean Micro2 Manuel utilisateur
Adey
Adey MagnaClean CMX MIDI PRO ASSIST Manuel utilisateur
Adey
Adey MagnaClean Professional2XP Guide de l'utilisateur
Adey
Adey MagnaClean CMX Manuel utilisateur
Adey
Adey MagnaClean Micro 2 Guide de l'utilisateur
Manuels Système de filtration d'eau populaires d'autres marques
Wisy
Wisy LineAir 100 Manuel utilisateur
Schaffner
Schaffner Ecosine FN3446 Series Manuel d'utilisation
Pentair
Pentair FLECK 4600 SXT Guide de l'utilisateur
H2O International
H2O International H20-500 Manuel utilisateur
Renkforce
Renkforce 2306241 Manuel utilisateur
Neo-Pure
Neo-Pure TL3-A502 Manuel utilisateur
