ADDAC System ADDAC805 Manuel utilisateur
March.2020
ADDAC805 Assembly Guide
ADDAC SYSTEM page 2
ADDAC SYSTEM page 3
ADDAC805 Assembly Guide
STEP 1:
Start by locating the 2 capacitors, notice the orientation printed on the pcb.
Tip: soldering these caps is easy, just place a dab of solder on the pad on your right (left pad if you’re
left handed) and then, with the help of a tweezer, put the capacitor in place and reflow the previously
tinned pad to reflow the solder while pushing the capacitor down. Then solder the other pad.
ADDAC SYSTEM page 4
STEP 2:
Next carefully break the 2 pcbs apart and proceed to locate the male and female pinheaders and solder
them like shown below.
ADDAC805 Assembly Guide
ADDAC SYSTEM
STEP 3:
Next locate and solder the 78L05 regulator like shown below.
STEP 4:
Next locate and solder the 2x5 boxed pinheader like shown below.
page 5
ADDAC805 Assembly Guide
ADDAC SYSTEM
STEP 5:
Next attach the spacer like shown below.
page 6
ADDAC805 Assembly Guide
ADDAC SYSTEM
STEP 6:
Next locate all trim pots and flatten out their legs with the help of some pliers, like shown below.
page 7
ADDAC805 Assembly Guide
ADDAC SYSTEM page 8
STEP 7:
Next locate and place all front panel parts.
ADDAC805 Assembly Guide
ADDAC SYSTEM page 9
STEP 8:
After all parts are in place, fit the frontpanel in and tighten all the nuts.
Before soldering make sure to adjust the height of the pcb keeping it parallel to the front panel.
ADDAC805 Assembly Guide
Keep lines parallel
ADDAC SYSTEM page 10
STEP 9:
Next proceed by soldering all pads in the back.
STEP 10:
For the last step attach the back pcb and place the back screw.
ADDAC805 Assembly Guide
Table des matières
Autres manuels ADDAC System Synthétiseur
ADDAC System
ADDAC System ADDAC812V Manuel utilisateur
ADDAC System
ADDAC System ADDAC207 Manuel utilisateur
ADDAC System
ADDAC System ADDAC307 Heart Sensing Manuel utilisateur
ADDAC System
ADDAC System ADDAC105 Manuel utilisateur
ADDAC System
ADDAC System ADDAC217 Manuel utilisateur
ADDAC System
ADDAC System ADDAC705 Manuel utilisateur
ADDAC System
ADDAC System ADDAC213A Manuel utilisateur
