Adaptec 2230SLP - SCSI RAID Controller Manuel utilisateur

COMMAND LINE UTILITY

USER’SGUIDE

●2

reproduced, stored in a retrieval system, or transmitted in any form or by any

means, electronic, mechanical, photocopying, recording or otherwise, without the

prior written consent of Adaptec, Inc., 691 South Milpitas Blvd., Milpitas, CA

95035.

Trademarks

Adaptec and the Adaptec logo are trademarks of Adaptec, Inc., which may be

registered in some jurisdictions.

Microsoft and Windows are trademarks of Microsoft Corporation in the US and

other countries, used under license.

All other trademarks are the property of their respective owners.

Changes

The material in this document is for information only and is subject to change

without notice. While reasonable efforts have been made in the preparation of this

document to assure its accuracy, Adaptec, Inc. assumes no liability resulting from

errors or omissions in this document, or from the use of the information

contained herein.

Adaptec reserves the right to make changes in the product design without

reservation and without notification to its users.

Disclaimer

IF THIS PRODUCT DIRECTS YOU TO COPY MATERIALS, YOU MUST HAVE

PERMISSION FROM THE COPYRIGHT OWNER OF THE MATERIALS TO

AVOID VIOLATING THE LAW WHICH COULD RESULT IN DAMAGES OR

OTHER REMEDIES.

●3

Software License Agreement

PLEASE READ CAREFULLY: THE USE OF THIS SOFTWARE IS SUBJECT TO

THE SOFTWARE LICENSE TERMS OF ADAPTEC, INC. AND OTHER

LICENSORS WHOSE SOFTWARE MAY BE BUNDLED WITH THIS

PRODUCT.

BY YOUR USE OF THE SOFTWARE INCLUDED WITH THIS PRODUCT YOU

AGREE TO THE LICENSE TERMS REQUIRED BY THE LICENSOR OF THAT

SOFTWARE, AS SET FORTH DURING THE INSTALLATION PROCESS. IF

YOU DO NOT AGREE TO THE LICENSE TERMS APPLICABLE TO THE

SOFTWARE, YOU MAY RETURN THE ENTIRE UNUSED PRODUCT FOR A

FULL REFUND.

In return for acquiring a license to use the Adaptec software, which may include

software from third party licensors and patches made available by Adaptec

(“Software”), and the related documentation, you agree to the following terms and

conditions:

License. This Agreement grants you, the Licensee, a license to:

Use the Software on a single computer system, which is not intended for use by

more than five (5) users; and:

Make one copy of the Software in machine readable form solely for back-up

purposes, provided you reproduce Adaptec's copyright proprietary legends.

Notwithstanding the foregoing, the Software may be used on the home, laptop or

other secondary computer of the principal user of the Software, and an additional

copy of the Software may be made to support such use. As used in this license, the

Software is “in use” when it is either loaded into RAM or installed on a hard disk

or other permanent memory device. The Software may be “in use” on only one

computer at any given time. (Different license terms and fees are applicable for

networked or multiple user applications.) As a specific condition of this license,

you agree to use the Software in compliance with all applicable laws, including

audio or other content using the Software without obtaining all necessary licenses

or permissions from the owner of the content.

Restrictions. You may not distribute copies of the Software to others or

electronically transfer the Software from one computer to another over a network.

You may not post or otherwise make available the Software, or any portion

thereof, in any form, on the Internet. You may not use the Software in a computer

service business, including in time sharing applications. The Software contains

trade secrets and, in order to protect them, you may not decompile, reverse

engineer, disassemble, or otherwise reduce the Software to a human-perceivable

form. YOU MAY NOT MODIFY, ADAPT, TRANSLATE, RENT, LEASE, LOAN,

RESELL FOR PROFIT, DISTRIBUTE, NETWORK OR CREATE DERIVATIVE

WORKS BASED UPON THE SOFTWARE OR ANY PART THEREOF.

Ownership of Software. As Licensee, you own the media upon which the software

is recorded or fixed, but Adaptec and its licensors retain title and ownership of the

Software recorded on the original media and all subsequent copies of the Software,

regardless of the form or media in which or on which the original and other copies

may exist. This license is not a sale of the Software or any copy.

●4

Confidentiality. You agree to maintain the Software in confidence and that you

will not disclose the Software to any third party without the express written

consent of Adaptec. You further agree to take all reasonable precautions to

preclude access of unauthorized persons to the Software.

Term. This license is effective until January 1, 2045, unless terminated earlier. You

may terminate the license at any time by destroying the Software (including the

related documentation) together with all copies or modifications in any form.

Adaptec will have the right to terminate our license immediately if you fail to

comply with any term or condition of this Agreement. Upon any termination,

including termination by you, you must destroy the Software (including the

related documentation), together with all copies or modifications in any form.

Special Terms Applicable to Databases. Where a database is included with the

Software, you acknowledge that it is licensed only in connection with the use of the

Software to perform disc creation, and that the database and all data derived

therefrom must be maintained in confidence in accordance with the provisions of

Section 4. This license does not grant you any rights to distribute or disclose such

database or data.

Limited Warranty. Adaptec and its Licensor warrant only that the media upon

which the Software is furnished will be free from defects in material or

workmanship under normal use and service for a period of thirty (30) days from

the date of delivery to you. ADAPTEC AND ITS LICENSORS DO NOT AND

CANNOT WARRANT THE PERFORMANCE OR RESULTS YOU MAY OBTAIN

BY USING THE SOFTWARE OR DOCUMENTATION. THE FOREGOING

STATES THE SOLE AND EXCLUSIVE REMEDIES ADAPTEC AND ITS

LICENSORS WILL PROVIDE FOR BREACH OF WARRANTY. EXCEPT FOR

THE FOREGOING LIMITED WARRANTY, ADAPTEC AND ITS LICENSORS

MAKE NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT

LIMITED, AS TO NON-INFRINGEMENT OF THIRD PARTY RIGHTS,

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some

states do not allow the exclusion of implied warranties or limitations on how long

an implied warranty may last, so the above limitations may not apply to you. This

warranty gives you specific legal rights and you may also have other rights which

vary from state to state.

The entire liability of Adaptec and its licensors, and your exclusive remedy for a

breach of this warranty, shall be:

The replacement of any media not meeting the above limited warranty which is

returned to Adaptec; or:

if Adaptec or its distributor is unable to deliver replacement media which is free

from defects in materials or workmanship, you may terminate this Agreement by

returning the Software and your money will be refunded.

Limitation of Liability. IN NO EVENT WILL ADAPTEC OR ITS LICENSORS BE

LIABLE TO YOU FOR ANY INCIDENTAL, CONSEQUENTIAL OR INDIRECT

DAMAGES, INCLUDING ANY LOST PROFITS, LOST SAVINGS, OR LOSS OF

DATA, EVEN IF ADAPTEC OR A LICENSOR HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER

PARTY. Some states do not allow the exclusion or limitation of special, incidental,

or consequential damages, so the above limitation or exclusion may not apply to

you.

●5

Export. You acknowledge that the laws and regulations of the United States and

other countries may restrict the export and re-export of the Software. You agree

that you will not export or re-export the Software or documentation in any form

in violation of applicable United States and foreign law.

Government Restricted Rights. The Software is subject to restricted rights as

follows. If the Software is acquired under the terms of a GSA contract: use,

reproduction or disclosure is subject to the restrictions set forth in the applicable

ADP Schedule contract. If the Software is acquired under the terms of a DoD or

civilian agency contract, use, duplication or disclosure by the Government is

subject to the restrictions of this Agreement in accordance with 48 C.F.R. 12.212 of

the Federal Acquisition Regulations and its successors and 49 C.F.R. 227.7202-1 of

the DoD FAR Supplement and its successors.

General. You acknowledge that you have read this Agreement, understand it, and

that by using the Software you agree to be bound by its terms and conditions. You

further agree that it is the complete and exclusive statement of the agreement

between Adaptec and you, and supersedes any proposal or prior agreement, oral or

written, and any other communication between Adaptec and you relating to the

subject matter of this Agreement. No additional or any different terms will be

enforceable against Adaptec unless Adaptec gives its express consent, including an

express waiver of the terms of this Agreement, in writing signed by an officer of

Adaptec. You assume full responsibility for the use of the Software and agree to use

the Software legally and responsibly. This Agreement shall be governed by

California law, except as to copyright matters, which are covered by Federal law.

This Agreement is deemed entered into at Milpitas, California by both parties.

Should any provision of this Agreement be declared unenforceable in any

jurisdiction, then such provision shall be deemed severable from this Agreement

and shall not affect the remainder hereof. All rights in the Software not specifically

granted in this Agreement are reserved by Adaptec.

Should you have any questions concerning this Agreement, you may contact

Adaptec by writing to:

Adaptec, Inc.

Legal Department

691 South Milpitas Boulevard

Milpitas, California 95035

Contents

Getting Started with the Command Line Utility

Installing the Command Line Utility ........................................ 8

Installing on Windows ......................................................... 8

Installing on Linux................................................................ 8

Installing on NetWare .......................................................... 9

Starting the Command Line Utility ........................................... 9

Using the Command Line Utility

ARCCONF Commands ............................................................. 11

HRCONF Commands................................................................ 27

Getting Started with the

Command Line Utility

In this chapter...

Installing the Command Line Utility..................................................8

Starting the Command Line Utility ....................................................9

This chapter explains how your Adaptec product supports the use of

one of these command line utilities:

●ARCCONF - for Adaptec RAID controllers

●HRCONF - for Adaptec HostRAID products

Each utility allows you to:

●Create and delete logical drives

●Display and modify a limited set of configuration settings

●Copy configurations from one computer to another

●Recover from a failed physical drive and rebuild an affected logical

drive

●Flashes new firmware and BIOS onto the controller

●Enables the controller to check the removal and connection of any

disk drives

●Restores the controller configuration (HRCONF only)

●Automatically update Windows drivers (ARCCONF only)

●Provides access to the status and event logs of a controller

(ARCCONF only)

●Isolate problems and determine their causes (ARCCONF only)

Getting Started with the Command Line Utility ●8

Installing the Command Line Utility

Both command line utilities are provided on the Adaptec Storage

Manager CD. The utility (ARCCONF or HRCONF) is automatically

installed in the same directory as Adaptec Storage Manager and must

remain there.

Installing on Windows

To i n s t a l l ARCCONF or HRCONF on Windows systems:

1Start the computer.

2After Windows starts, insert the Adaptec Storage Manager CD.

3When the installation program starts, follow the on-screen

instructions.

Installing on Linux

To i n s t a l l ARCCONF or HRCONF on Linux systems:

1Start the computer.

2After Linux starts, insert the Adaptec Storage Manager CD.

3Mount the Adaptec Storage Manager CD:

Red Hat: mount /dev/cdrom /mnt/cdrom

SuSE: mount /dev/cdrom /media/cdrom

4Change to the cdrom directory:

Red Hat: cd /mnt/cdrom/linux/manager

SuSE: cd /media/cdrom/linux/manager

5Extract the RPM package and install it:

rpm --install ./StorMan*.rpm

6Unmount the Adaptec Storage Manager CD:

Red Hat: umount /mnt/cdrom

SuSE: umount /media/cdrom

Getting Started with the Command Line Utility ●9

Installing on NetWare

To i n s t a l l ARCCONF or HRCONF on NetWare:

You need the latest Support Pack for your operating system so you can

run the supported Java Virtual Machine (JVM). You need JVM version

1.3 or later. To check your JVM version, load JVM, type JAVA -

VERSION.

Note: For the latest updates from Novell, visit www.novell.com.

1Insert the Adaptec Storage Manager CD.

2From the command prompt, type load cdrom and press Enter.

From the command prompt, type:

xx_yy_zz:\netware\manager\install

where xx is the product CD, yy is the version number, and zz is

the release number. For example:

adptcd_v2_01

The installation program starts.

3Follow the on-screen instructions to complete the installation.

Starting the Command Line Utility

To s t a r t ARCCONF or HRCONF, enter one of the following commands:

install_dir*

is the directory where the utility is installed and name

of utility

is ARCCONF or HRCONF

To see a list of available commands, type

ARCCONF

HRCONF at

the

prompt. The utility command functions are detailed in the next

chapter, Using the Command Line Utility.

Windows: c:\<install_dir*>\<name of utility>.exe

Linux: /usr/StorMan/<name of utility>

NetWare: load <name of utility>

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Adaptec Logiciel

Adaptec

Adaptec ICP 5045BL Manuel utilisateur

Adaptec

Adaptec 2130SLP - SCSI RAID Controller Feuille d'instructions

Adaptec

Adaptec ICP 5045BL Manuel utilisateur

Adaptec

Adaptec Storage Manager Manuel technique

Adaptec

Adaptec DuraStor 7220SS Manuel utilisateur

Adaptec

Adaptec RAID 2045 Manuel utilisateur

Adaptec

Adaptec RAID 5405 Manuel utilisateur

Adaptec

Adaptec RAID 3085 Manuel utilisateur

Adaptec

Adaptec ICP 5045BL Manuel utilisateur

Adaptec

Adaptec 1684800 - EZ-SCSI Deluxe Manuel utilisateur

Adaptec

Adaptec CDP-00278-02-A Manuel utilisateur

Adaptec

Adaptec MAN-00005-UG Manuel utilisateur

Adaptec

Adaptec RAID 3085 Manuel utilisateur

Adaptec

Adaptec RAID 51245 Manuel utilisateur

Adaptec

Adaptec CDP-00278-01-A Manuel utilisateur

Adaptec

Adaptec 2130SLP - SCSI RAID Controller Manuel utilisateur

Adaptec

Adaptec Snap Server 700i Series Manuel utilisateur

Adaptec

Adaptec RAID 2810SA Manuel utilisateur

Adaptec

Adaptec Snap EDR Manuel utilisateur

Adaptec

Adaptec Storage Manager Manuel utilisateur

Adaptec

Adaptec GDTSETUP Manuel utilisateur

Adaptec

Adaptec RAID 5405Z Manuel utilisateur

Adaptec

Adaptec CDP-00276-01-A Manuel utilisateur

Adaptec

Adaptec 2130SLP - SCSI RAID Controller Feuille d'instructions

Manuels Logiciel populaires d'autres marques

COMPRO

COMPRO COMPROFM Manuel utilisateur

Muratec

Muratec OFFICEBRIDGE ONLINE Manuel utilisateur

Oracle

Oracle Contact Center Anywhere 8.1 Manuel utilisateur

Adobe

Adobe 65007312 - Photoshop Lightroom Manuel

Avaya

Avaya NULL One-X for RIM Blackberry Manuel utilisateur

HP ProLiant BL420c Manuel utilisateur

PS Audio

PS Audio PowerPlay Manuel du propriétaire

Brady

Brady LOCKOUT PRO 3.0 Manuel de service

Avaya

Avaya Interaction Center Manuel utilisateur

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manuel

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manuel utilisateur

Oracle

Oracle Application 9i Manuel utilisateur

Acer

Acer RDM Manuel utilisateur

Canon

Canon Vixia HF21 Manuel utilisateur

Canon

Canon ZR950 Manuel utilisateur

Samsung

Samsung Auto Backup Manuel utilisateur

Polycom

Polycom Vortex EF2201 Instructions d'installation et d'utilisation

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manuel utilisateur