Adaptec RAID 2810SA Comment utiliser

--------------------------------------------------------------------

Release Notes

Adaptec Serial ATA RAID Controller - 2810SA

Adaptec Storage Manager-Browser Edition

as of November 2003

--------------------------------------------------------------------

Please review this file for important information about issues

and erratas that were discovered after completion of the standard

product documentation. In the case of conflict between various

parts of the documentation set, this file contains the most

current information.

NOTE: The latest firmware and documentation will be available

for download at http://www.adaptec.com.

The following information is available in this file:

1. Software Versions and Documentation on CD

1.1 Controller & Utility Software

1.2 Documentation

2. Installation Instructions

2.1 Software

2.2 Hardware

3. General

4. ACU (Adaptec Configuration Utility)

5. AFU (Adaptec Flash Utility)

6. CLI (Command Line Interface)

7. Adaptec Storage Manager-Browser Edition

8. Operating Systems

8.1 Linux (General)

8.2 Red Hat Linux

8.3 Windows

9. Motherboards and System-Specific Compatability

9.1 BBS (BIOS Boot Specification)

9.2 ASUS

9.3 HP

9.4 IBM

9.5 Microstar

9.6 Tyan Trinity 400

9.7 SOYO KT333 Dragon Ultra

9.8 SuperMicro

--------------------------------------------------------------------

1. Software Versions and Documentation on CD

1.1. Controller & Utility Software

- Firmware Version: 7211

- ACU Version: 7211

- Storage Manager Version-Browser Edition: 1.23.006

1.2. Documentation

- Serial ATA RAID 2810SA Quick Installation Guide (printed)

- Serial ATA RAID 2810SA Installation and User's Guide

(see file on CD: AAR-2810SA_IUG.PDF)

- Serial ATA RAID 2810SA RAID Command Line Interface (CLI)

Software Reference Guide (see file on CD: RAIDSWRG.PDF)

- Adaptec Storage Manager-Browser Edition Online Help

--------------------------------------------------------------------

2. Installation Instructions

2.1. Software

The storage management software distributed with the Adaptec

2810SA is Adaptec Storage Manager-Browser Edition. Install

Adaptec Storage Manager-Browser Edition on Windows or

Linux platforms as detailed in the product documentation

provided on the CD in PDF format.

2.2. Hardware

Hardware installation instructions are also detailed in the

product documentation.

--------------------------------------------------------------------

3. General

- The Adaptec 2810SA allows you to import arrays or

legacy volumes created using the Adaptec 1210SA and 2410SA

RAID controllers.

- Although the Adaptec management utilities allow the creation

of RAID-50's with the Adaptec 2810SA, this RAID level is not

supported at this time.

- RAID 10 with 16k stripe size is not supported. An attempt to

create a RAID 10 with a 16k stripe size results in an error.

- RAID 10 with two or more degraded legs will rebuild the legs

sequentially, not simultaneously.

- When morphing a RAID 1 or RAID 5 to a RAID 0, and the original

array had a spare drive attached, the RAID 0 that results after

the morphing operation continues to have the spare drive

attached.

- The Adaptec 2810SA does not support PCI-Hotplug.

- Adaptec recommends that you do not run Adaptec Storage Manager-

Browser Edition and CLI (Command Line Interface) at the same

time.

- After pulling a hot spare and successfully building it into a

redundant array, information about the hot spare drive may not

display as expected. Adaptec Storage Manager-Browser Edition

may continue to display it as a global hot spare. CLI may

continue to display it as a global spare, but the array will

not have a spare attached. ARC (the BIOS utility) displays the

spare attached to the array as expected.

- Attach only new drives to the Adaptec 2810SA. New drives are

either drives that are being used for the first time, or used

drives that have been initialized or low-level formatted.

Attaching used drives may result in problems such as (but not

limited to):

° Existing/rebuilding arrays may go off line

° Interrupted rebuilds may continue on the wrong drive

- Removing and reinserting an array's drive while the array is

still building/clearing may result in unpredictable status

being reported for any and all of the controller's arrays.

- You cannot move drives containing an array/volume from one

controller to another while power is on. Move drives by

powering off both affected controllers; relocating the drives;

and powering on the controller/drives at the new location.

Failure to do this can result in loss of configuration or

data or both.

- When you display information on a physical device,the vendor

and model information may be displayed incorrectly.

- After building or verifying a leg of a second level array,

the status of the second-level array displays as a Quick

Initialized array.

- In a situation where a RAID-10 is degraded, the BIOS reports

an error message that says degraded RAID-0 and degraded

RAID-1 (instead of degraded RAID-10).

- You can not change the priority of a RAID-10 verify. Setting

the priority at the start of a verify has no effect. The

priority is still shown as high. Changing the priority of

a running verify on a raid-10 changes the displayed priority

until a rescan is done, then the priority shows as high again.

- SATA events are displayed with SCSI nomenclature.

- If you experience problems with your video display or mouse

when using the Adaptec CD as the boot media for a system,

you'll need to specify your hardware by typing the following

at the command prompt:

bootcd [options] <Enter> or lowres [options] <Enter>

lowres forces the bootcd to use a generic framebuffer of 640x480

fbdev forces the bootcd to use a generic framebuffer of 800x600

options:

° m=<mouse type>

° s=<video server type>

° mon=<monitor value>

° p=<port> fbdev

° <mouse type>

man (for manual configuration, or

serial: generic, thinking, logitech, logitechcc, msnew,

msintelli, mousesystems, mmseries, mmhittab

non-serial: alpsps/2, atibm, geniusnmps/2, geniusnsps/2,

thinkingps/2, logibm, logimman+ps/2,

msintellips/2, msbm, usb

° <port> is a number from 1 to 4 representing com1..com4

for serial mice)

° <video server type>

man (for manual configuration), or

vga16 svga s3 mach32 mach8 8514 p9000 agx w32 mach64 i128

s3V 3dlabs

° <monitor value> can be a number from 0 to 11:

0 - 640x480 @ 60 Hz

1 - 800x600 @ 56 Hz

2 - 1024x768 @ 87 Hz int (no 800x600)

3 - 1024x768 @ 87 Hz int, 800x600 @ 56 Hz

4 - 800x600 @ 60 Hz, 640x480 @ 72 Hz

5 - 1024x768 @ 60 Hz, 800x600 @ 72 Hz

6 - 1024x768 @ 70 Hz

7 - 1280x1024 @ 60 Hz

8 - 1280x1024 @ 74 Hz

9 - 1280x1024 @ 76 Hz

10 - 1600x1200 @ 70 Hz

11 - 1600x1200 @ 76 Hz

--------------------------------------------------------------------

4. ACU (Adaptec Configuration Utility)

In the ACU, a RAID 10 created using CLEAR mode shows as

"UNPROTECTED" until it is cleared. Drive status is also

shown as Not Busy, even though they are clearing.

--------------------------------------------------------------------

5. AFU (Adaptec Flash Utility)

- The Adaptec 2810SA's AFU.EXE does not support the

/reset command.

- AFU does not display the correct Build number of firmware that

is flashing. It always displays build 0 during flashing,

verifying, and displaying flash information.

- When you execute AFU and choose the "Save Flash Image" you'll

see a message that asks you to insert the disk labelled AA2161

firmware. Please insert a "blank" disk and label it "AA2161

Firmware Disk 1. Ensure that the blank disk is formatted and

has enough space. If it is not formatted you will receive an

error message telling you that the disk cannot be opened. If

disk does not have enough space to save the flash image, the

error message will tell you that an error occurred while

saving the image and will save an incomplete image file.

--------------------------------------------------------------------

6. CLI (Command Line Interface)

CLI, a command line storage management utility, allows you to

create and manage your disk arrays from a command prompt on all

supported operating systems.

- No Readme items for this feature

--------------------------------------------------------------------

7. Adaptec Storage Manager-Browser Edition

- To use Adaptec Storage Manager-Browser Edition in Internet

Explorer (IE), you must have IE's active scripting feature

(Javascript) enabled in its Tools > Internet Options area.

- Adaptec Storage Manager-Browser Edition includes an

enhancement called Down a Drive. This allows you to treat a

drive as if it had failed. By doing so, the firmware behaves

as if the drive had failed on its own. This can be useful to

force failover to a spare, etc.

- Blink LED feature - In situations where SATA devices are

contained in an enclosure that is supported by the Adaptec

2810SA, this feature can be used to blink the LEDs on all

members of an array.

- Starting Adaptec Storage Manager-Browser Edition using

Internet Explorer on a system not attached to a network

results in a dialog box showing:

Work Offline

No connection to the internet is currently available. To

view internet content that has been saved on your computer,

click Work Offline.

Click Try Again to attempt to connect.

[ Work Offline ] [ Try Again ]

Click 'Try Again' to continue using Adaptec Storage Manager-

Browser Edition. 'Work Offline' does not continue as

expected.

- Staying logged on to Adaptec Storage Manager-Browser Edition

and using the Refresh function increases memory comsumption.

Eventually, the application could use up virtual memory,

slowing the system down, and finally causing it to hang. To

avoid this, Adaptec recommends closing the browser window

after every session in which you create or manage arrays.

- When managing a remote system, you'll receive no overt

notification if the remote system has been restarted or

rebooted. This is problematic only if you leave a connection

session open for a period of time while not making use of it.

When managing a remote managed system, Adaptec recommends

re-logging onto that system.

- When running Adaptec Storage Manager-Browser Edition on a

remote client, it is possible that information related to

both physical and logical devices will stop being displayed.

If this happens, you must log out, close the current browser

window, run Adaptec Storage Manager-Browser Edition and then

- Some versions of Internet Explorer may refuse to acknowledge

session cookies when the server name being used to point to a

system is an alias. An alias is a name stored in a nameserver

to associate commonly used names on a network to the actual

name or IP number of a server or system on that network. Use

either the primary name referenced in the nameserver, or an

IP address.

- Adaptec Storage Manager-Browser Edition requires the browser

to have session level cookies enabled. Session cookies do not

store information on your hard drive and are destroyed when you

close the browser window. Adaptec Storage Manager-Browser

Edition uses a session cookie to establish a relationship

between your browser and your system login information on the

web server.

- While Adaptec Storage Manager-Browser Edition does support and

control earlier Adaptec RAID products, it does not operate with

arrays on those products having a stripe size larger than 64kB.

You can not expand arrays using stripe sizes greater than

64kB or smaller than 16kB. To convert older arrays that use

these unsupported stripe sizes:

° back up data on the old arrays while connected to the older

controller

° create new arrays on the new controller

° restore the backed-up data to the new arrays

- It is possible to log onto a Web-server only system that is

part of a RAID controller network. Using a web-server system to

attempt to log on to another system not having Adaptec Storage

Manager-Browser Edition installed will fail as expected, but

the web-server will allow you to log into localhost. The

web-server-only system will show no controllers installed.

- Editing the *.conf files may affect the file's permissions.

This could require overtly setting the owner to

Administrators-Only. Possible impact:

° Web-Server only installations responding to managed system

requests

° Managed-System only responding to web server requests

° Host filter lists being ignored

° Permitted user lists being ignored

- When Adaptec Storage Manager-Browser Edition is installed on

Linux, an icon/shortcut is installed in the root/system folder

hierarchy. It also adds an entry in Mozilla's bookmarks.

- When using Adaptec Storage Manager-Browser Edition on a system

that also uses Adaptec Storage Manager Pro, uninstalling

Adaptec Storage Manager-Browser Edition causes Adaptec Storage

Manager Pro to malfunction. You must uninstall Adaptec Storage

Manager Pro, then reinstall it.

- When a browser window is open and attached to an active Adaptec

Storage Manager-Browser Edition session, opening another window

in the browser creates another browser window automatically

attached to the same Adaptec Storage Manager-Browser Edition

session. If the second session logs off of the Adaptec Storage

Manager-Browser Edition service, other browser sessions lose

their attachments.

- When Adaptec Storage Manager-Browser Edition is installed on

a FAT32 partition that is changed to an NTFS partition,

Adaptec Storage Manager-Browser Edition no longer functions.

To repair it, use the repair function in Add/Remove programs,

or uninstall and reinstall it.

- Performing a Verify or Verify/Fix on an RAID 10 displays the

same message text in the event log. The message is similar to:

Build/Verify started on second level array of array "Array_0"

You may see the message three times for a verify, but only

once for a verify/fix.

- Task priority is not retained after rebooting. If you change

a priority to LOW or MEDIUM, and reboot, the priority always

turns back to the default priority of HIGH.

- When an array fails, the array name returns to its default

name.

- Do not attempt to include a drive that is clearing in a

new array. Doing so causes Adaptec Storage Manager-Browser

Edition to crash and you'll need to restart.

- The Adaptec 2810SA is not listed as a supported controller

in the online Help files. However, Adaptec Storage

Manager-Browser Edition fully supports the Adaptec 2810SA.

--------------------------------------------------------------------

8. Operating System Issues

8.1. Linux (General)

This release supports the following Linux distributions:

Red Hat 8.0 and 9.0

Red Hat Advanced Server 2.1

SuSE 8.1 and 8.2

SuSE SLES 8.0

When you delete an array on Linux, the operating

system can no longer see the last array either. To allow

the operating system to see the last array, reboot your

system.

8.2. Red Hat Linux

Using Adaptec Storage Manager-Browser Edition on RedHat

to create arrays on previous generation Adaptec RAID

controllers is supported. However, the system hangs if you

try to create a size-limited array with that combination.

8.3. Windows

- To format a logical volume in Windows 2000, Windows XP, or

Windows Server 2003, it is recommended that you use the

operating system's Disk Management or Disk Manager tools

instead of right-clicking the drive listed in My Computer.

Formatting using the My Computer function, may result in an

incomplete format which would make it necessary to reformat

the drive.

- On Windows 2000, be sure you have installed the most recent

service pack. At a minimum, you should use Service Pack 3.

- On Windows 2000, more event notificatins are generated

than arrays degraded. For example, in a configuration with

four Raid 5's sharing three drives, failing one drive

produces six notifications--one for each of the arrays

affected, plus two extra for the second array.

- When using Adaptec Storage Manager-Browser Edition on

Windows you may experience significant delays in the

notification of events. In some cases, events are not

reported until another action is performed that affects

the drives or arrays. Also, when you reinsert a failed

or new drive into an array, you may find that the

notification/request to rescan for the new configuration

is either extremely delayed or never occurs. A manual

rescan at this point fails, and you must reboot to

successfully run Adaptec Storage Manager-Browser Edition.

--------------------------------------------------------------------

9.0 Motherboards and System-Specific Compatability Issues

9.1. BBS (BIOS Boot Specification)

On motherboard BIOSes supporting BBS, BBS support is usually

enabled on the Adaptec 2810SA. However, if the system has

problems booting with that configuration, disable BBS.

9.2. ASUS

On the ASUS P4PE motherboard, the system generates many

event 15's. The system operates normally and you ignore it.

However, to avoid filling up the event log, Adaptec

recommends deleting them.

On the ASUS P3C-2000 and P2B motherboard families, the

system will hang during BIOS initialization when an

Adaptec 2810SA is installed.

9.3. HP

On systems running HP's OpenView Network Node Manager, you

can not uninstall Adaptec Storage Manager-Browser Edition

using the regular uninstall script. If you attempt to do so,

you'll see a message indicating that the SNMP service must

be stopped manually. This is because OpenView installs its

own master SNMP agent. Stop the service manually, then

uninstall Adaptec Storage Manager-Browser Edition.

9.4. IBM

If you install the Adaptec 2810SA in a 64-bit slot on an

IBM E-Server XSeries 220 systems, you may experience

problems booting. When installed in a 64-bit slot and the

on-board SCSI controller is enabled, the system freezes

when POST scans the Adaptec 2810SA. The controller card's

banner displays, immediately followed by BIOS NOT INSTALLED,

and the system freezes. Controller card settings do not have

any effect on the failure. To resolve the problem, either

install the Adaptec 2810SA in a 32-bit slot or disable the

onboard SCSI controller.

On the IBM Netfinity 5000, the system generates many

Event 9's. The system will contiunue to operate normally.

However, to avoid filling up the event log, Adaptec

recommends deleting them.

9.5. Microstar

On the Microstar MS-6321, do not install the Adaptec 2810SA

into the PCI 5 slot. Using this slot may result in a system

POST error in which the system stops responding to user

input after displaying the "Controller Started" message.

9.6. Tyan Trinity 400

On these motherboards running Windows Server 2003 (and

possibly other Windows systems), the Adaptec 2810SA can

not be installed in Slot #5 or Slot #6. Also, on Windows

Server 2003 (and possibly other Windows versions), the

Adaptec 2810SA fails to boot from other devices if

installed in either Slot 5 or Slot 6.

9.7 SOYO KT333 Dragon Ultra

The Adaptec 2810SA driver can not coexist wih the

sound driver (system's onboard C-Media 8738). The

system reboots then locks up when the OS is started.

Either do not install the sound driver or disable

sound hardware in the system's BIOS.

9.8 SuperMicro

The Adaptec 2810SA does not support Mode 0 flash on the

SuperMicro P3T-DDE motherboard.

--------------------------------------------------------------------

publication may be reproduced, stored in a retrieval system, or

transmitted in any form or by any means, electronic, mechanical,

photocopying, recording or otherwise, without prior written consent

of Adaptec, Inc., 691 South Milpitas Blvd., Milpitas, CA 95035.

Autres manuels pour RAID 2810SA

Autres manuels Adaptec Contrôleurs

Adaptec

Adaptec ACB-2320B Manuel utilisateur

Adaptec

Adaptec AAR-2420SA Feuille d'instructions

Adaptec

Adaptec PowerDomain 29160 Manuel utilisateur

Adaptec

Adaptec AAR-1420SA Feuille d'instructions

Adaptec

Adaptec 51645 Manuel utilisateur

Adaptec

Adaptec 44300 Manuel utilisateur

Adaptec

Adaptec ICP 5045BL Manuel utilisateur

Adaptec

Adaptec 2930U2 - Storage Controller Ultra2 SCSI 80... Manuel de service

Adaptec

Adaptec AAR-2020SA Feuille d'instructions

Adaptec

Adaptec GDT8546RZ - ICP Vortex RAID Controller Manuel utilisateur

Adaptec

Adaptec RAID 5805Z Manuel utilisateur

Adaptec

Adaptec ASR-2045 Manuel d'utilisation

Adaptec

Adaptec 39320D Manuel utilisateur

Adaptec

Adaptec 1405 Manuel utilisateur

Adaptec

Adaptec 2025ZCR - SCSI RAID Storage Controller Manuel utilisateur

Adaptec

Adaptec ASR-3085 Manuel d'utilisation

Adaptec

Adaptec 2074700-R - ICP Vortex GDT8514RZ RAID... Manuel utilisateur

Adaptec

Adaptec ACB-2322B Manuel utilisateur

Adaptec

Adaptec 2258400-R - 51245 RAID 512MB PCI-Express... Manuel utilisateur

Adaptec

Adaptec 1420SA - Serial ATA II RAID Controller Manuel utilisateur

Adaptec

Adaptec ACB-2070A Manuel utilisateur

Adaptec

Adaptec AAR-2420SA Feuille d'instructions

Adaptec

Adaptec 9803 Guide de l'utilisateur

Adaptec

Adaptec 2120S - SCSI RAID Controller Manuel utilisateur

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur