ADAPT SOLUTIONS SP-HDA18 Manuel utilisateur
SPEEDY-LIFT
INSTALLATION MANUAL
SP-HDA18
HONDA ODYSSEY
2018 & UP
SCALE 1:5
1 of 4
ITEM
PART NUMBER
QTY
DESCRIPTION
1
SP000-01
1
Mechanism Assembvly
2
SP600B
1
Housing Cover Assembly -Black-
3
SP700B
1
Hook Assembly -Black-
4
SP740
2
Wheelchair support
5
SL800
1
Electrical Kit -Alone-
6
SP-HDA18-00
1
SPEEDY-LIFT Kit Honda Odyssey 2018 & Up
7
PRD 110-104
4
Round washer head tapping screw #8 x 1/2
8
PRD 337-211P
10
Button Head Socket Cap Screw Zinc Plated 5/16-18 x 1/2
9
PRD 2946
4
Flange Locknut Zinc Plated 5/16-18
SP-HDA18
ADAPT SOLUTIONS
|[email protected]|866.641.0419|418.889.9838 fax
PART NUMBER
SPEEDY-LIFT Honda Odyssey 2018 & Up
DESCRIPTION
SPEEDY-LIFT HONDA ODYSSEY 2018+
SCALE 1:5
14
9
10
3
7
10
1
2
14
6
8
4
5
12 13
11
SCALE 1:9
2 of 4
ITEM
PART NUMBER
QTY
DESCRIPTION
1
SP000-01
1
Mechanism Assembvly
2
SP-HDA18-01
1
Floor Adapter
3
SP-HDA18-02
1
Floor Adapter
4
SP-HDA18-03
1
Floor Adapter Fixing
5
SP-HDA18-04
1
Floor Adapter Fixing
6
SP600B
1
Housing Cover Assembly -Black-
7
SL-UNI-07
4
Nut for SPEEDY-LIFT rail
8
SL-UNI-08
4
Rail Spacer
9
SL-UNI-09
4
Rail Spacer Washer
10
PRD 110-104
4
Round washer head tapping screw #8 x 1/2
11
PRD 302-140P
2
Hex Cap Bolt Zinc Plated 5/16-18 x 1 G5
12
PRD 333-107
2
Nylon Insert Locknut 5/16-18
13
PRD 341-105P
4
Flat Washer Zinc Plated I.D. 1/4 USS
14
PRD BSHCS51618114P
4
Button Head Socket Cap Screw Zinc Plated 5/16-18 x 1 1/4
SP-HDA18
ADAPT SOLUTIONS
|[email protected]|866.641.0419|418.889.9838 fax
PART NUMBER
SPEEDY-LIFT Honda Odyssey 2018 & Up
DESCRIPTION
SPEEDY-LIFT HONDA ODYSSEY 2018+
1
2
SCALE 1:6
2
SCALE 1:5
3 of 4
ITEM
PART NUMBER
QTY
DESCRIPTION
1
SP700B
1
Hook Assembly -Black-
2
PRD 337-211P
6
Button Head Socket Cap Screw Zinc Plated 5/16-18 x 1/2
SP-HDA18
ADAPT SOLUTIONS
|[email protected]|866.641.0419|418.889.9838 fax
PART NUMBER
SPEEDY-LIFT Honda Odyssey 2018 & Up
DESCRIPTION
SPEEDY-LIFT HONDA ODYSSEY 2018+
12
SCALE 1:4
SCALE 1:6
3
SCALE 1:4
4 of 4
ITEM
PART NUMBER
QTY
DESCRIPTION
1
SP740
2
Wheelchair support
2
PRD 337-211P
4
Button Head Socket Cap Screw Zinc Plated 5/16-18 x 1/2
3
PRD 2946
4
Flange Locknut Zinc Plated 5/16-18
SP-HDA18
ADAPT SOLUTIONS
|[email protected]|866.641.0419|418.889.9838 fax
PART NUMBER
SPEEDY-LIFT Honda Odyssey 2018 & Up
DESCRIPTION
SPEEDY-LIFT HONDA ODYSSEY 2018+
1. Remove the driver side second row seat. Slide the seat platform completely towards the door and then
move back one adjustement.
2. Install the adaptor locking bracket # SP-HDA18-03 to the SPEEDY-LIFT floor adaptor # SP-
HDA18-01 using the provided 5/16-18x1’’ bolt, flat washers and lock nut. Install this adaptor on the
outside. Install the adaptor locking bracket # SP-HDA18-04 to the SPEEDY-LIFT floor adaptor #
SP-HDA18-02 using the provided 5/16-18x1’’ bolt, flat washers and lock nut. Install this adaptor on
the inside.
3. Install the two floor adapters to the seat base mounting brackets. Lever down the locking bracket and
then tighten the bolts. NOTE: To avoid rattling, use electrical tape around mounting points of the
floor adapters.
5. Place the SPEEDY-LIFT in the vehicle on the floor adaptors using the plastic shims between the
SPEEDY-LIFT and the floor adapters. Center the SPEEDY-LIFT in the door opening. Place the
SPEEDY-LIFT as close as possible to the door.
6. The SPEEDY-LIFT up/down and in out motors can be disengaged manually to slide the SPEEDY-
LIFT in and out and move the arm up and down. NOTE: When disengaging the arm, it will spring up as
the arm of the SPEEDY-LIFT is aided by a 100-lb gas shock, so, hold the arm firmly when
disengaging. To disengage, move the handle to the right and push down. This will disengage the two
motors and the arm will spring up. To reengage, lift up the lever. You may have to move the arm and the
unit back and forth.
7. Place the washer over the SPEEDY-LIFT track and use the 5/16” X 1 1/4” button head bolts to line
up the washer plate, the SPEEDY-LIFT track and the black plastic shim. Secure the SPEEDY-
LIFT to the floor adaptors using the threaded blocks SL-UNI-07.
8. Install the electrical wiring for the SPEEDY-LIFT. Follow the instructions found in the attached
document entitled: ELECTRICAL INSTALLATION FOR SPEEDY-LIFT.
9. Power the SPEEDY-LIFT all the way out. Attach the wheelchair hook and support assembly SP700 to
the head of the SPEEDY-LIFT. The height of the hook assembly may be adjusted depending on the
height or style of wheelchair. Remove the plastic housing covers.
10. The stop up and stop down height may be adjusted using the bolts in the slotted holes on the up down
gear. NOTE: The stop up bolt is predajusted for maximum travel.
11. Press the ‘OUT’ button on the hand held pendant until the upper wheelchair support bracket is
positioned 1/4” to 1/2” below the rigidizer bar on the wheelchair. Adjust the stop down bolt so that the
arm stops in this position.
STOP UP
STOP DOWN
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels ADAPT SOLUTIONS Accessoires automobiles
ADAPT SOLUTIONS
ADAPT SOLUTIONS ASENTO EV-EXP18R Manuel utilisateur
ADAPT SOLUTIONS
ADAPT SOLUTIONS ASENTO EV-ACA17R Manuel utilisateur
ADAPT SOLUTIONS
ADAPT SOLUTIONS EV-BLZ19R Manuel utilisateur
ADAPT SOLUTIONS
ADAPT SOLUTIONS LINK LK-SILC14L Manuel utilisateur
ADAPT SOLUTIONS
ADAPT SOLUTIONS SPEEDY-LIFT SP-HDA05 Manuel utilisateur
ADAPT SOLUTIONS
ADAPT SOLUTIONS XL-Seat XLS-DAKQ05R Manuel utilisateur
ADAPT SOLUTIONS
ADAPT SOLUTIONS XL-SEAT XLS-COLX04R Manuel utilisateur
ADAPT SOLUTIONS
ADAPT SOLUTIONS ASENTO EV-COLC15R Manuel utilisateur
ADAPT SOLUTIONS
ADAPT SOLUTIONS Power-Pull Manuel utilisateur
ADAPT SOLUTIONS
ADAPT SOLUTIONS XL-SEAT XLS-DAKC05L Manuel utilisateur
