ADA INSTRUMENTS GroundHammer-3 Manuel utilisateur
Operating manual
Gasoline jack hammer
Model: GroundHammer-3/4
Manufacturer Address: WWW. ADAINSTRUMENTS.COM
INSTRUMENTS
GroundHammer
INSTRUMENTS
1. Introduction .......................................................................................................................................................................................3
2. Instruction of safe operation............................................................................................................................................................3
3. Name of major part........................................................................................................................................................................5
4. Main use and feature ....................................................................................................................................................................7
5. Prepared work before using.............................................................................................................................................................7
6. Start, run and stop machine.................................................................................................................................................................9
7. Technicaldata.....................................................................................................................................................................................10
8. Failure analysis and troubleshooting methods................................................................................................................................11
9. Technical maintenance......................................................................................................................................................................12
10. Warranty ..........................................................................................................................................................................................15
11. Exceptions from responsibility .......................................................................................................................................................15
Appendix 1. Warranty card
Appendix 2.
Table of contents
MEASUREMENT FOUNDATION
GroundHammer
INSTRUMENTS
3
1. Introduction
Thanks for the purchase of ADA Instruments product. Beforer starting operation read carefully the operating manual. Keep it always at hand.
ADA Instruments product has ergonomic desing. It provides usability, high power and productivity.
Content of the operating manual may not fully correspond to the purchased instrument.
2. Instruction of safe operation
1. Only adults can use ground drill.
2. Users can’t operate ground drill if they didn’t read the operating manual.
4. Ensure that anyone who uses the instrument is familiar wi th all controls and safety precautions.
5. Wear non-slip protective shoes, protective gloves, glasses, earmuffs and helmet .
6. When you use the instrument don´t wear scarfs and jewellery.
8. Never run engine in a poorly ventilated area where the exaust fumes may be trapped and not easily taken away.
9. Move ground drill without power, detach the auger.
10. Replace auger if there are cracks and damages on it.
11. Use the mixture of fuel with octane level 92 and oil for 2 -stroke engines, in the ratio 25:1.
13. Never remove the fuel cap with the engine running. Always keep (min 3m) the instrument (before starting) from the area with spilled fuel.
14. Always keep the handles of the instrument dry and clean.
15. Before starting ensure that auger is not locked.
16. Never touch auger and don´t do servicing with engine running.
17. After you start the engine or before you stop working let the engine work at no load 2-3 min. Never stop suddenly the engine at great speed.
MEASUREMENT FOUNDATION
GroundHammer
INSTRUMENTS
4
19. Move the instrument during operation at no load.
20. Never touch the coating of spark plug or wire if the engine is running. Or electric shock may occur.
21. Store the instrument in an upright position with empty fuel tank.
22. Regularly check, adjust, repair and clean the instrument.
23. Don´t disassemble return starter. You can be seriously hurt.
24. Contact service center for maintenance that is not mentioned in this manual.
25. If your instrument is not suitable for use any more, dispose of it. Make sure that you don´t do damage to the environment.
MEASUREMENT FOUNDATION
GroundHammer
INSTRUMENTS
1
2 3 4 5
6
7
8
9
10
11
12
13
14
15
16 17
18
5
3. Name of major part
GroundHammer 3:
1. Handle
3. Stop Button
4. Throttling Handle
5. Starter Handle
6. Air Filter
7. Tank Cap
8. Spark Plug
9. Gearbox
10. Assist Handle
11. Cylinder Block
12. Drill Seat Installation Set
13. Sliding Sleeve
14. Protect Cover
15. Drill
16. Admitting Switch
17. Carburetor
18. Gearbox Cover
GroundHammer 3
MEASUREMENT FOUNDATION
6
GroundHammer
INSTRUMENTS
GroundHammer 4:
1. Combination switch
2. Stop switch
3. Starter handle
4. Adjust switch
5. Throttle switch
6. Hammer case
7. Hammer socket
8. Piling socket
9. Support plate
10. Grip
11. Damping spring
12. Positioning sleeve
13. Handle
14. Spark plug
15. Intake switch
17. Oil tank cap
18. Oil tank
19. Fuel bubble
20. Steel cover
21. Throttle cable
GroundHammer 4
4
2
1
5
13
12
11
96
10
7
15
8
14 16 17
19
20
21
3
18
MEASUREMENT FOUNDATION
GroundHammer
INSTRUMENTS
7
4. Main use and feature
Use
1. It can be used on building construction, road building project.
2. Break cornerstone for the railway road and tamp sleepers work.
3.In cold water and ice breaking region, do ice-breaking work with digging shovel so as not to destroy the hard ground.
4. It can be used on pipe laying, drainage construction and harbor construction.
Features
1. It is the world’s lightest weight, lowest displacement engine type handheld gasoline hammer.
shovel digging a 360 degree rotation.
3. It can regulate the number of impact energy and impact, apply for a variety of materials suitable for construction.
4. Applications: Our machine is suit in many kinds of situations, such as crashing project in road-building, electric power, telecom, and cable, ditch.
5. The handle of machine has rubber coating. It greatly reduces the recoil force of the machine, and improves the comfortable for the user.
5. Prepared work before using
Installation the drill
1. Lubricating the drill.
2. Clean the chisel and gripping chuck with the cloth to remove
old lubricant with dust.
Important: put the lubricant on the back part of the chisel. Other-
wise it will runout very fast. Move up the gripping chuck, insert
the drill into the drill seat then release the gripping chuck, make
Fuel
The general gasoline and the two-stroke oil mix. Fig.1
MEASUREMENT FOUNDATION
GroundHammer
INSTRUMENTS
8
Fig.2
Recommended mixing ratio:
Conditions gasoline : engine oil
Work within 20 hours 20:1
Work after 20 hours 25:1
1. Prohibit the use of pure gasoline (no refueling
two-stroke engine oil) for fuel.
2. Add fuel in the well-ventilated place.
the neck. If any fuel spill, please completely remove
or evaporate before starting the gasoline engine
4. After refueling, tighten the fuel tank cap.
MEASUREMENT FOUNDATION
9
GroundHammer
INSTRUMENTS
6. Start, run and stop machine
with fuel.
Close the air vent when the engine is in the state of cooling, but
open the air vent only when the engine is heated.
the operation handle with one of your hands and quickly pull
the pulling handle with the other hand. Do not let the pulling
handle go back freely in your repeat pulling, but hold it and put
it down with its resilience to protect the starter.
3. Open the air vent completely when the gasoline engine is
started.
Air vent
Start
Fuel
bubble
Fig.3
Run
1. Let the engine warm up at low speed for at least 5 minutes before the operation.
2. Prohibit use gasoline hammer under the non-breaking with high speed operation.
Stop machine
1. Release the gas handle.
2. Press the red button to stop.
MEASUREMENT FOUNDATION
GroundHammer
INSTRUMENTS
10
7. Technical data
GroundHammer-3 GroundHammer-4
Engine type Single cylinder, air cooling, 2 stroke
LxWxH (mm) 603x280x375
Fuel mixing oil (gasoline 25, two-stroke engine oil 1)
Fuel tank capacity 0.9 L 1.2 L
Weight 10.5 Kg 13 Kg
Displacement 42.5 CC
Max power and speed 0.9 KW/6500 r/min 1.2 KW/6500 r/min
Max torque and speed 1.45 N.m/5000 r/min
Consumption rate
Impact frequency 1700~2230 BpM
Impact energy 25~45 J
Spark plug type L6 L6T
Starter system Hand pull start
Ce manuel convient aux modèles suivants
1
Table des matières
Langues :
