ADA INSTRUMENTS ROBOT-60 Manuel utilisateur

Operating manual

Laser distance meter

Model: ROBOT-60

Manufacturer: ADAINSTRUMENTS Address: WWW.ADAINSTRUMENTS.COM

MEASUREMENT FOUNDATION

ROBOT 60

Table of contents

1. Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

2. Prohibited use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3. Start up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

4. Menu functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

5. Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

6. Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

7. Message codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

8. Techical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

9. Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

10. Care and cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11





14. Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

15. Exceptions from responsibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12





MEASUREMENT FOUNDATION

ROBOT 60

Congratulations on the purchase of laser distance meter ADA ROBOT-60!

Permitted use

· Measuring distances

· Computing functions, e.g. areas, volumes, subtractions, Pythagorean calculation

· Storing measurements

The safety regulations and instructions along with the operating manual should be read carefully before initial operation.The

person responsible for the instrument must ensure that equipment is used in accordance with the instructions. This person is also

accountable for the deployment of personnel and for their training and for the safety of the equipment when in use.

Safety instruction

Please follow up instructions given in operators’ manual.

Do not stare into beam. Laser beam can lead to eye injury (even from greater distances).

Do not aim laser beam at persons or animals.

The laser plane should be set up above eye level of persons.

Use the instrument for measuring jobs only.

Do not open instrument housing. Repairs should be carried out by authorized workshops only. Please contact your local dealer.

Do not remove warning labels or safety instructions.

Keep instrument away from children.

Do not use instrument in explosive environment.

MEASUREMENT FOUNDATION

ROBOT 60

Prohibited use

- Using the instrument without instruction

- Using outside the stated limits

- Using the instrument in explosive environment (gas station, gas equipment, chemical industry and so on)

- Deactivation of safety systems and removal of explanatory and hazard labels





- Don’t shoot at others with the laser intentionally

- Don’t stare at the laser directly.

- Aiming directly into the sun

- Inadequate safeguards at the surveying site (e.g. when measuring on roads, construction sites, etc.)

- Using the instrument on the plane, near manufacturers, technological objects



The instrument is a laser class 2 laser product with power < 1 mW and wavelength 635 nm.

START UP

Keypad

1 ON / Single measure / Continuous measure

2 Area / Volume / Pythagorean measure

3 Plus / Minus / Units

4 Reference / Illumination

5 Clear / OFF

6 Data storage key

MEASUREMENT FOUNDATION

ROBOT 60

Display

1 Laser ON

2 Reference (front/rear)

3 Area / volume/ Pythagorean

4 Hardware error

5 Battery display

6 Data storage

7 Data storage quanity

8 Fixed timing measure

9 Wall space measure

10 Units with exponents ( 2/3 )

11 Auxiliary Display 1

12 Auxiliary Display 2

13 Main display

Inserting / Replacing Batteries

Remove the battery cover, insert the battery correctly. Pay attention to cor-

rect polarity.

Close the battery compartment.

Replace the battery when symbol constantly blinks in the display.

Batteries should be removed in case of danger of corrosion, if the device

will not be used for a long time.

MENU FUNCTIONS

Swtich on and off

Press the button (1) to switch on the instrument and laser.

Press and hold key for about 2 seconds to start continuous measuring.

The device also switches off automatically after 3 minutes of inactivity i.e.

no key is pressed within that interval.

To switch off the instrument press and hold button (5) 2 sec.

Reference Setting

Default reference setting is from the rear of the device.

Press the button (4) to set the reference the front or the rear.

When the end-piece is folded out fully, the reference rear is set.

You will see the reference symbol on the display.

5 6 7 8 9

MEASUREMENT FOUNDATION

ROBOT 60

Selecting Units

Press and hold the button (3) for 2 sec. until the desired unit is displayed.

Illumination

Press and hold the button (4) for 2 seconds to switch the illumination on or off.

Clear-Key

Cancel the last action. Press button (5).

MEASUREMENTS

Single distance measurement

Press button (1) to activate the laser. When in continuous laser mode, press this button to trigger the distance measurement directly.

Press again to trigger the distance measurement. The result is displayed immediately.

Continuous Measurement

Press and hold the button (1) for about 2 seconds to start continuous measuring.

Minimum/ Maximum measurement



diagonals (maximum values) or horizontal distances (minimum values).

Press and hold down the button (1). Then slowly sweep the laser back and forth and up and down over the desired target point-(e.g. into the corner of

a room).

Press to stop continuous measurement. The values for maximum and minimum distances are shown on the display as well as the last measured value

in the summary line.

MEASUREMENT FOUNDATION

ROBOT 60

FUNCTIONS

Addition / Subtraction

Distance measuring.

Press button (3): next measurement is added to the previous one. Press button (3): next measurement is substracted from the previous one.

The result is displayed in the second line. Previous value is displayed in the previous line.

Area

Press the button (2) once.The symbol is displayed.



Press button to take the second measurement (for example, width). Measured value is displayed in the second line. First measurement is displayed in



Addition / Subtraction of areas

Area measuring – see Area.

Press button (3) to enter into the Addition / Subtraction mode. Area value is displayed in the second line.



After the completion of area, press button (1), the result of substraction of areas is displayed in the main display area.



Volume

For volume measurements, press button (2) twice until the indicator for volume measurement appears on the display.



Press button (1) to take the second measurement (for example, width). Measured value is displayed in the second line. First measurement is displayed







MEASUREMENT FOUNDATION

ROBOT 60

Indirect measurement



surface and can’t be measured directly.

Make sure you adhere to the prescribed sequence of measurement:

All target points must be in a horizontal or vertical plane.



instrument placed on a wall) or the instrument is mounted on a tripod.

The minimum / maximum function can be used. The minimum value must be used for measurements at right angles to the target; the

maximum distance for all other measurements.

Indirect measurement – determing a distance using 2 auxilary measurements.

E.g. When height and distance can’t be measured directly.

Press button (2) 3 times. The symbol is displayed. The distance to be measured is blinking in the symbol triangle.



Press button (2) to take distance measuring.



Indirect measurement – determing a distance using 3 measurements.

Press button (2) 4 times. The symbol is displayed. The distance to be measured is blinking in the symbol triangle.

Press button (1) to take distance measuring (side of the triangle) . The result of the function is displayed in the second line.



Press button (1) to take distance measuring (side of the triangle) . The result of the function is displayed in the second line.

The result of the measurement is displayed in the second line.

MEASUREMENT FOUNDATION

ROBOT 60

Storage of constant / historical storage

Storage of constant

You can store and recall a frequently used val-

ue (e.g. height of a room). Measure the desired

distance, press and hold the button (6) until



Recalling the constant

Press the button (6) once to recall the constant

and then press the button (1) to enter it into

your calculation.

History storage

Press the button (6) twice and the previous 20

results (measurements or calculated results)

are shown in reverse order. Use button (3) to

navigate through the records. Press the button

(1) to use the result from the summary line for

further calculations.

INFO CAUSE REMEDY

204  Repeat procedure

252 Temperature too high Cool down instrument

253 Temperature too low Warm up instrument

255 Receiver signal too weak Use target plate

256 Received signal too

strong

Use target plate (grey

side)

257 Wrong measurement Use target plate (brown

side)

258 Wrong initialization Switch on – off the

instrument

ERROR CAUSE REMEDY

Error Hardware error Switch on/off the device

several times and check if

the symbol still appears. If

so please call your dealer

for assistance.

MESSAGE CODES



Following mistakes can be corrected.

MEASUREMENT FOUNDATION

ROBOT 60

TECHNICAL DATA

Range, without target, m 0.05 to 60

Accuracy, mm ±1.5*

Smallest unit displayed 1 mm

Laser class 2

Laser type 635 nm, <1 mW

IP rating IP 54

Automatic switch off 3 minutes of inactivity

Display illumination yes

Battery life, 2 x AAA > 5000 measurements

Dimensions, mm 116×54×35

Weight 155g

Temperature range:

Storage

Operating

-25º to +70º

0º to +40º

* In favourable conditions (good target surface properties, room temperature).



surfaces.

Table des matières

Autres manuels ADA INSTRUMENTS Instrument analytique

ADA INSTRUMENTS

ADA INSTRUMENTS ZVE 150SD Manuel utilisateur

ADA INSTRUMENTS

ADA INSTRUMENTS COSMO MINI Manuel utilisateur

ADA INSTRUMENTS

ADA INSTRUMENTS Cosmo 100 Manuel utilisateur

ADA INSTRUMENTS

ADA INSTRUMENTS COSMO 120 video Manuel utilisateur

ADA INSTRUMENTS

ADA INSTRUMENTS COSMO 60 GREEN Manuel utilisateur

ADA INSTRUMENTS

ADA INSTRUMENTS Metrix 60 Manuel utilisateur

ADA INSTRUMENTS

ADA INSTRUMENTS COSMO 150 VIDEO Manuel utilisateur

Manuels Instrument analytique populaires d'autres marques

Cocraft

Cocraft NLT04 Manuel utilisateur

M&C

M&C GENTWO PMA1000 Manuel utilisateur

MICRO-EPSILON

MICRO-EPSILON optoncdt 1700 Manuel utilisateur

CONDTROL

CONDTROL XP4 PRO Manuel utilisateur

Extech Instruments

Extech Instruments BR200 Manuel utilisateur

Dewetron

Dewetron DEWE-30-16 Manuel du produit

EXTOL PREMIUM

EXTOL PREMIUM 8820043 Instructions d'installation et d'utilisation

RIDGID

RIDGID SeeSnake Compact Manuel utilisateur

Teledyne

Teledyne 3000PA Manuel utilisateur

YDLIDAR

YDLIDAR TIA Manuel utilisateur

Olympus

Olympus IPLEX FX Series Manuel utilisateur

Bosch

Bosch GLM 50 C Professional Manuel utilisateur

Reflecta

Reflecta DigiEndoscope Manuel utilisateur

Chinavision

Chinavision CVACZ-G696 Instructions de montage

Fuji Electric

Fuji Electric ZKMA Manuel utilisateur

Teledyne

Teledyne 3300TA Manuel utilisateur

VOLTCRAFT

VOLTCRAFT IC-100HD Manuel utilisateur

RIDGID

RIDGID micro CA-25 Manuel utilisateur