24
11. The Menu
11.1 Navigation in the menu:
Call up menu
Select menu block
Change Setting
Acknowledge setting /
exit the menu
Return to weighing mode
In weighing mode press and at the same time The first
menu item InC 5 will be displayed
• With help of , the individual menu items can be selected
one after the other.
• Switch into the available setting using .
• Either save by pressing or cancel by pressing .
• Press to exit menu .
5
4. Transportation & Storage
4.1 Testing upon acceptance
When receiving the appliance, please check packaging immediately, and the appliance itself when
unpacking for possible visible damage.
4.2 Packaging / return transport
Keep all parts of the original packaging for a possibly required return.
Only use original packaging for returning.
Prior to dispatch disconnect all cables and remove loose / mobile parts.
Reattach transport securing devices. (see chapter 5.2)
Secure all parts such as the glass wind screen, the weighing platform, power
unit etc. against shifting and damage.
5. Unpacking, Setup and Commissioning
5.1 Installation Site, Location of Use
The balances are designed in a way that reliable weighing results are achieved in common
conditions of use.
You will work accurately and fast, if you select the right location for your balance.
Therefore, observe the following for the installation site:
• Place scales on a stable, even surface
• Avoid extreme heat as well as temperature fluctuation caused by installing next to a radiator or
in the direct sunlight;
• Protect the balance against direct draughts due to open windows and doors;
• Avoid jarring during weighing;
• Protect the balance against high humidity, vapors and dust;
• Do not expose the device to extreme dampness for longer periods of time. Non-permitted
condensation (condensation of air humidity on the appliance) may occur if a cold appliance is
taken to a considerably warmer environment. In this case, acclimatize the disconnected
appliance for ca. 2 hours at room temperature.
• Avoid static charge of goods to be weighed or weighing container.
Major display deviations (incorrect weighing results) may be experienced should electromagnetic
fields (e.g. due to mobile phones or radio equipment), static electricity accumulations or instable
power supply occur. Change location or remove source of interference.
