ACU-RITE 06024 Manuel utilisateur

User Manual of Product 1:

AcuRite Multi-Room Weather Station with Wireless

Indoor/Outdoor Thermometer and Digital Color Display with

Weather Forecaster (02082M), Full Color

Instruction Manual

Home Environment Display

models 06024/06036

auto

This product requires at least one AcuRite Monitor or Sensor

(sold separately) to be operational.

CONTENTS

Unpacking Instructions ........... 2

Package Contents .................. 2

Features & Benets................. 2

Setup .................................... 6

Display Setup ........................ 6

Set the Time, Date & Units ...... 7

Backlight Settings..................11

Placement Guidelines ............11

Using the Display..................12

Programmable Alarms...........13

Troubleshooting ....................14

Calibration ...........................16

Specications........................17

FCC Information ...................17

Customer Support .................18

Warranty..............................18

Questions? Contact Customer Support at

(877) 221-1252 or visit www.AcuRite.com.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

Congratulations on your new AcuRite product. To ensure the best

possible product performance, please read this manual in its entirety

and retain it for future reference.

Unpacking Instructions

Remove the protective lm that is applied to the LCD screen prior to using this

product. Locate the tab and peel off to remove.

Package Contents

1. Display

2. Power adapter

3. Instruction Manual

Features & Benets

FRONT OF DISPLAY

1. Backlight Button

Activates momentary backlight

during battery power. Acts as a dimmer

control while using power adapter.

2. Color-coded Location Buttons

For setup and viewing location data.

3. Button

For alarm setup. Press and HOLD to

disable all alarms.

auto

3 4 5 4 6

▲

and

▼

Buttons

For setup preferences and menu

navigation.

5. SET Button

For setup preferences and menu

navigation.

6. Button

For settings and viewing location high

and low records.

BACK OF DISPLAY

1 1

2 5

1. Integrated Hang Holes

For easy wall mounting.

2. Battery Compartment

3. Plug-in for Power Adapter

4. RESET Button

Press and release for full reset to

factory defaults.

5. CLEAR Button

For resetting the high and low records

that are stored for the location(s) that

the display is tracking.

6. Fold-out Stand

For tabletop use.

7. Battery Compartment Cover

HOTTU] 1,111 L]RSEMENT1a

...62' e-> «(•»)sq°F

f 103~ 29%

+SENSOR 1, 1, 1, 1, I f'+SENSOR,NOWATERPRESENT!

□

UT]

□□

w KITCHEN

f «r•»)YBoF ,2°F f :::I.L

·35pm

«r•1» I ~1

" I Sr. 29%

DISPLAY SCREEN

1 2 3 4 5 6

auto

14 13 12

-tJ:

AUTO

I/a

1. “Learning Mode” Icon

Disappears after weather forecast

self-calibration is complete (see page

12).

2. 12 to 24 Hour Weather Forecast

Self-Calibrating Forecasting pulls data

from your backyard to generate your

personal forecast.

3. Barometric Pressure

Arrow icon indicates direction pres-

sure is trending.

4. Wireless Signal Strength

Signal strength detected for the

external Monitor or Sensor (sold

separately) that is reporting data for

the location (#5).

5. Location Name

Label your data readings by location

name (see page 8).

6. Indicator

Indicates style of monitor during moni-

tor setup (see page 10).

7. Alarm ON Indicator

Indicates alarm is activated to emit an

audible alert when conditions exceed

your presets (see page 13).

8. Low Battery Indicator

For the product that is reporting data

for the corresponding location.

9. Water Detector Icon

Indicates Water Detector (sold

separately) is reporting data.

10. Temperature Icon

Temperature reading reported by the

product that is installed in the location

indicated (“Kitchen” in the example

shown).

11. Humidity Icon

Humidity reading reported by the

product that is installed in the location

indicated.

12. Clock

13. Indicator

Indicates display is in auto-dimming

brightness mode (see page 11).

14. Date

15. +SENSOR Icon

Indicates a Wired Sensor (sold

separately) is reporting data to the

display. Shown with temperature,

humidity and water detector icons

when displaying wired sensor data

(#8, #9 and #10).

• •

SETUP

Display Setup

1 Install External Monitor or 3 Install or Replace Backup

Sensor Batteries Batteries (optional)

BEFORE powering on the display, 1. Remove the battery

install batteries for all external compartment cover.

Monitors and/or Sensors (sold 2. Insert 3 x AAA alkaline

separately) that you would like batteries into the battery

to synchronize with the display. compartment, as shown. Follow

If you wish to perform this step at the polarity (+/-) diagram in the

a later time, please see “Add On battery compartment.

a Monitor/Sensor” directions on 3. Replace the battery cover.

page 10.

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE

WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.

BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to

2 Plug Power Adapter into

Electrical Outlet

For the best performance, plug

in the power adapter as the main

power source for this product.

IMPORTANT: Batteries are a backup power source to

preserve records in the event of a power outage.

Power adapter is required as the primary power

source to enjoy the full functionality of this product.

2 Plug in

Power Adapter

3 Install Backup Batteries

3 AAA batteries (optional)

Install Batteries

2 AA Batteries

be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of

used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries

in re, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT

recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.

Set the Time, Date & Units

Press and release the “SET” button, located on the front of the display, to enter

SET MODE. Once in set mode, the preference you are currently setting will

blink on the display.

To adjust the currently selected (ashing) item, press and release the “

▲

“

or “

▼

“ buttons (press and HOLD to fast adjust). To save your adjustments,

press and release the “SET” button again to adjust the next preference. The

preference set order is as follows:

TIME ZONE (EST, AST, NST, HAT, AKT, PST, MST, CST)

AUTO DST* (Daylight Saving Time ON or OFF)

CLOCK HOUR

CLOCK MINUTE

CALENDAR MONTH

CALENDAR DATE

CALENDAR YEAR

TEMPERATURE SCALE (°F or °C)

BAROMETRIC PRESSURE SCALE (inHg or hPa)

*If you live in an area that observes Daylight Saving Time, DST should be set

to ON, even if it is not currently Daylight Saving Time.

You will automatically exit SET MODE if no buttons are pressed for 10 seconds.

Enter SET MODE at any time by pressing the “SET” button.

Expand the System

The display features built-in sensors for measuring temperature and humidity

at its location. The display can be expanded to track additional conditions by

using compatible Monitors and Sensors (optional; sold separately). Add up

to 3 indoor and/or outdoor Monitors and Sensors to observe conditions in

additional locations within 330 ft (100 m).

Compatible Monitors and Sensors are available at: www.AcuRite.com

Compatible Monitors Perfect for:

Temperature & Humidity Monitor

Model 00275RM

• Outdoor applications

18 32

Room Monitor, Model 00276RM

• Indoor applications

Compatible Monitors

(continued) Perfect for:

Temperature & Humidity Sensor

Model 06002RM

• Indoor and outdoor applications

Monitor + Wired Sensor Perfect for:

Water Detector, Model 06010RM

• Basement ooding

• Roof leaks

• Leaky appliances

• Sump pump failure

• Track high or low water level

18 32

Liquid & Soil Temperature Sensor

Model 06011RM

• Indoor pool, spa, pond or fountain

temperature

• Prevent frozen pipes

• Seeding, potting and gardening

Spot Check Temperature &

Humidity Sensor

Model 06012RM

• Monitor conditions in hard to reach

places (attic, basement, etc.)

• Pet areas

• Evaluate heating and cooling efciency

and coverage in your home

• Monitor conditions in nursery or child’s

room

Setup a Location Name on the Display

For easy home environment monitoring, label data readings on the display

using the following directions. Simply select the name from a preset list that

most closely matches the location where the display, Monitor or Sensor that is

reporting data for the location is installed:

1. Press and release the color-coded button next to the location you want to

update on the display.

2. Press and release the “ ” button.

3. Press and release the “

▲

“ or “

▼

“ buttons until “EDIT NAME” is showing.

4. Press and release the “SET” button.

5. Press and release the “

▲

“ or “

▼

“ buttons to cycle through the available

location names.

6. Press and release the “SET” button to conrm a name selection.

Location Names

AQUARIUM BEDROOM 4 HOT TUB OTHER

ANIMALS CELLAR HUMIDOR OUTDOOR

ATTIC COOLER INDOOR POOL

BARN DINING RM KITCHEN PORCH

BASEMENT FAMILY RM LAUNDRY SPA

BATHROOM FREEZER LIVING RM STORAGE

BATHROOM2 FRIDGE MASTER BR SUMP PUMP

BATHROOM3 GARAGE MUSIC RM UPSTAIRS

BEDROOM GARDEN NURSERY UTILITY

BEDROOM 2 GUEST RM OFFICE WINE

BEDROOM 3

Remove a Location from the Display

Remove a location’s data readings and disconnect from the display by accessing

the “DELETE” screen:

1. Press and release the color-coded button next to the location you want to

delete from the display..

2. Press and release the “ ” button.

3. Press and release the “

▲

“ or “

▼

“ buttons until “DELETE” is showing.

4. Press and release the “SET” button. “DELETE MONITOR” will ash.

5. Press and release the “SET” button to remove the location from the display.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ACU-RITE Moniteur

ACU-RITE

ACU-RITE 06017RM Manuel utilisateur

ACU-RITE

ACU-RITE 06043 Manuel utilisateur

ACU-RITE

ACU-RITE 06057 Manuel utilisateur

ACU-RITE

ACU-RITE Atlas 06104 Manuel utilisateur

ACU-RITE

ACU-RITE DRO10 Series Manuel utilisateur

ACU-RITE

ACU-RITE Atlas 06104 Manuel utilisateur

ACU-RITE

ACU-RITE Iris 06102M Manuel utilisateur

ACU-RITE

ACU-RITE 6024 Manuel utilisateur

ACU-RITE

ACU-RITE VUE Manuel utilisateur

ACU-RITE

ACU-RITE Iris Nano 06090 Manuel utilisateur

ACU-RITE

ACU-RITE Atlas 06099 Manuel utilisateur

ACU-RITE

ACU-RITE Iris 06101 Manuel utilisateur

ACU-RITE

ACU-RITE Atlas 06104M Manuel

ACU-RITE

ACU-RITE 06037M Manuel utilisateur

ACU-RITE

ACU-RITE 01057RM Manuel utilisateur

ACU-RITE

ACU-RITE 06021RM Manuel utilisateur

ACU-RITE

ACU-RITE Iris 06102M Manuel

ACU-RITE

ACU-RITE Atlas Direct-To-Wi-Fi Manuel

ACU-RITE

ACU-RITE acu-rite III Manuel utilisateur

ACU-RITE

ACU-RITE Iris 06103M Manuel

ACU-RITE

ACU-RITE 06020RM Manuel utilisateur

ACU-RITE

ACU-RITE 06039M Manuel utilisateur

ACU-RITE

ACU-RITE 06039M Manuel utilisateur

ACU-RITE

ACU-RITE 06016RM Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation