ActronAir Serene 2 RC-02 Manuel utilisateur
IMPORTANT NOTE:
Please read this manual carefully before operating your new remote control and keep it near the unit for future reference.
That’s better. That’s Actron.
SERENE SERIES 2
REMOTE CONTROLLER
Operation Manual
Suitable for
Serene Series 2
WRE-026CS
WRE-035CS
WRE-050CS
WRE-072CS
WRE-085CS
Humidity
Boost
Operation Manual - Serene 2 Remote Controller
Document: 9590-4010 Ver. 1 200819
Operation Manual Remote Controller
2
Table of Contents
01. Remote Controller Specifications .................................................................... 3
02. Handling the Remote Controller ..................................................................... 3
03. Button and Functions ...................................................................................... 4
04. Remote Screen Indicators................................................................................ 5
05. Basic Functions ............................................................................................... 6
. Mode Operation.............................................................................................................
. Setting the Timer............................................................................................................
06. How To Use Advanced Function ................................................................... 11
. Swing Function .............................................................................................................
. LED Display ..................................................................................................................
. Quiet Function .............................................................................................................
. Freeze Protection (FP) Function ..................................................................................
. LOCK Function .............................................................................................................
. BOOST Function ..........................................................................................................
. ECO/GEAR Function .....................................................................................................
. Proximity Sensor...........................................................................................................
. SET Function.................................................................................................................
Operation Manual - Serene 2 Remote Controller
Document: 9590-4010 Ver. 1 200819
Operation Manual Remote Controller
3
. Remote Controller Specifications
Model RC-02
Rated Voltage 3.0V( Dry batteries 1.5V AAA × 2)
Signal Receiving Range 8m
Environment -5°C~60°C
. Handling the Remote Controller
Inserting and Replacing Batteries
Your air conditioning unit comes with two batteries. Put the batteries in the remote control before use.
1. Slide the back cover from the remote control downward, exposing the battery compartment.
2. Insert the batteries, paying attention to match up the (+) and (-) ends of the batteries with the symbols inside the
battery compartment.
3. Slide the battery cover back into place.
BATTERY NOTES
For optimum product performance:
• Do not mix old and new batteries, or batteries of different types.
• Do not leave batteries in the remote control if you don’t plan on using the device for more than 2 months.
• Do not use rechargeable batteries.
BATTERY DISPOSAL
Waste Electrical & Electronic Equipment Disposal Guideline
• Do not dispose off the waste electrical & electronic equipment with local council waste. These must be disposed off
through the council designated hazardous waste collection centre.
• The equipment may contain hazardous substances, improper or incorrect disposal may have a negative effect on
human health and on the environment.
• Remove batteries and separated from the rest of the product before disposing.
CAUTION
When the batteries are removed, the remote controller erased all settings. After inserting new batteries, remote controller
and the Air conditioning may have a different settings.
To sync their settings, press any button or adjust the settings from remote controller. The Air conditioning will follow the
new remote controller settings.
Tips For Using Remote Control
1. Use the remote controller within a distance of 8 metres from the appliance, pointing it towards the unit. Reception
is confirmed by a beep.
2. The air conditioner will not receive the command if curtains, doors, other materials and direct sunlight block the
signals from the remote controller to the indoor unit.
3. Remove batteries if the remote will not be used more than 2 months.
Operation Manual - Serene 2 Remote Controller
Document: 9590-4010 Ver. 1 200819
Operation Manual Remote Controller
4
. Button and Functions
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote control. The
following is a brief introduction to the remote control itself. For instructions on how to operate your air conditioner,
refer to the Basic Functions section of this manual.
1ON/OF
This button turns the air conditioner On or Off.
2TEMP UP
Increases temperate in 0.5°C increments. Maximum
temperature is 30°C.
3SET
Scrolls through operation functions as follows:
Breeze away Active Clean Fresh
Sleep Follow Me AP Mode
Breeze away ......
The selected symbol will flash on the display area,
press the OK button to confirm.
4TIMER
Set timer to turn unit On or Off.
5TEMP DOWN
Decreases temperature in 0.5OC increments. Min.
temperature is 16OC.
6FAN SPEED
Selects fan speeds in the following order: Au (auto)
20% 40% 60% 80% 100%.
7Boost
Enables unit to reach preset temperature in shortest
possible time
8LED
Toggles the LED display and buzzer of the air
conditioner buzzer to On and Off.
9Humidity Mode
Adjust the room humidity during Dry in a range of 35%
~ 85%. Press this button to increase the humidity in 5%
increments.
NOTE: After setting, the humidity settings will display
on the screen.
10 EGO/GEAR
Press this button to enter the energy efficient mode in
a sequence of following:
ECO GEAR (75%) GEAR (50%) Previous
setting mode ECO ......
11 Swing
Starts and stops the horizontal louver movement.
Hold down for 2 seconds to initiate vertical louver auto
swing feature.
12 OK
Used to confirm the selected functions.
13 Eco Intelligent Eye
Used to detect the occupancy in the room to save
energy.
14 Mode
Scrolls through operation modes as follows:
AUTO COOL DRY HEAT FAN AUTO
15 Screen
Displays the setting, indicators and operation
conditions.
Humidity
Boost
1
2
5
14
12
11
6
78
13
10
9
15
4
3
Operation Manual - Serene 2 Remote Controller
Document: 9590-4010 Ver. 1 200819
Operation Manual Remote Controller
5
. Remote Screen Indicators
1Transmission Indicator
Lights up when remote sends signal to indoor
unit.
2ECO
Displays when ECO feature is activated.
3TIMER ON/OFF
Timer On display.
Timer Off display.
4Quiet
Quiet feature display.
5HORIZONTAL LOUVER
Swing feature displays.
6VERTICAL LOUVER
Auto Swing feature displays.
7FAN SPEED
Displays selected fan speed:
Quiet I 1%
II 2% - 20%
LOW IIII 21% - 40%
MED IIIIII 41% - 60%
HIGH IIIIIIII 61% - 80%
IIIIIIIIII 81% - 100%
AUTO IIIIIIIIII AUTO
This fan speed can not be adjusted in AUTO or
DRY mode.
8BOOST MODE
Boost feature displays.
9TEMPERATURE/TIMER/FAN/SPEED
Displays the set temperature by default or fan
speed or timer setting when using TIMER ON/OFF
functions.
• Temperature range: 16oC - 30oC
• Timer setting range: 0-24 hrs
• Fan speed setting range: Au - 100%
• Humidity setting range: 35% - 85%
This display is blank when operating is FAN mode.
10 LOCK
Displays when LOCK feature is activated.
11 GEAR
Displays when GEAR feature is activated.
12 Mode
Displays the current mode including:
13 Information
Information is displayed when the functions are in
use.
- Breeze Away Display
- ECO Intelligent Eye Display
- Low Battery Detection Display (If flashes)
- Active Clean Feature Display
- Fresh Feature Display
- Sleep Mode Display
- Follow Me Feature Display
- Access Point Mode (AP Mode)
3
7
4
65 8
11
2
1
10
9
12
13
Operation Manual - Serene 2 Remote Controller
Document: 9590-4010 Ver. 1 200819
Operation Manual Remote Controller
6
. Basic Functions
05.01. Mode Operation
NOTE
Setting Temperature Operation
• The operating temperature range for units is 16-30OC.
• You can increase or decrease the set temperature in 0.5OC increments.
AUTO Mode
In AUTO mode, the unit will automatically select the COOL, FAN, HEAT or DRY
function based on the set temperature.
1. Press the button to select AUTO.
2. Set your desired temperature using the or buttons.
3. Press the button to start the unit.
NOTE
FAN SPEED is disabled in AUTO mode.
COOL Mode
In COOL mode, the unit will cool the room to the desired temperature.
1. Press the button to select COOL mode.
2. Set your desired temperature using the or buttons.
3. Press the button to select the fan speed in a range of Au-100%.
4. Press the button to start the unit.
HEAT Mode
1. Press the button to select HEAT mode.
2. Set your desired temperature using the or buttons.
3. Press the button to select the fan speed in a range of Au-100%.
4. Press the button to start the unit.
NOTE
As outdoor temperature drops, the performance of your unit’s HEAT function may
be affected.
DRY Mode (Dehumidifying)
1. Press the button to select DRY mode.
2. Set your desired temperature using the or buttons.
3. Press the button to start the unit.
NOTE
The Fan Speed is automatically set to AUTO while in the DRY mode.
Operation Manual - Serene 2 Remote Controller
Document: 9590-4010 Ver. 1 200819
Operation Manual Remote Controller
7
FAN Mode
1. Press the button to select FAN mode.
2. Press the button to select the fan speed in a range of Au-100%.
3. Press the button to start the unit.
NOTE
Set temperature is disabled in FAN mode. As a result, the remote control’s LCD
screen will not display temperature.
CAUTION
Do not put your fingers in or near the blower and suction side of the unit. The high-speed fan inside the unit may cause
injury.
05.02. Setting the Timer
Timer ON (Auto-On Operation)
The TIMER ON feature is useful when you want the unit to turn off automatically at desired time.
Example:
To start the air conditioner in 6 hours.
Start
Off
6 hours later
Set
1. While the unit is OFF, press the button.
2. Press the or buttons to adjust the time.
3. Point the remote controller to the indoor unit and wait for 1 second. The indicator will show in the remote
controller and in the indoor unit panel to indicate that this function is activated.
ON Indicator
Operation Manual - Serene 2 Remote Controller
Document: 9590-4010 Ver. 1 200819
Operation Manual Remote Controller
8
Timer OFF (Auto-OFF Operation)
The TIMER OFF feature is useful when you want the unit to turn off automatically at desired time.
Example:
To turn OFF the air conditioner in 10 hours.
Stop
On
Set 10 hours later
1. While the unit is ON, press the button twice until timer indicator is shown.
2. Press the or buttons to adjust the time.
3. Point the remote controller to the indoor unit and wait for 1 second. The indicator will show in remote
controller and in the indoor unit panel to indicate that this function is activated.
OFF Indicator
Combined Timer (Setting both ON and OFF timers simultaneously)
TIMER OFF TIMER ON (On Stop-Start operation)
This feature is useful when you want to stop the air conditioner after you go to bed, and start it again in the morning
when you wake up or when you return home.
Example:
To stop the air conditioner 2 hours after setting and start it again 10 hours after setting.
On
Stop
2 hours later
after setting
Set
Start
10 hours later
after setting
Operation Manual - Serene 2 Remote Controller
Document: 9590-4010 Ver. 1 200819
Operation Manual Remote Controller
9
1. While the unit is ON, press the button twice until timer indicator is shown.
2. Press the or buttons to adjust the time.
3. Point the remote controller to the indoor unit and wait for 1 second. The indicator will show in remote
controller and in the indoor unit panel to indicate that this function is activated.
4. Press the button until timer indicator is shown.
5. Press the or buttons to adjust the time.
ON Indicator
6. Point the remote controller to the indoor unit and wait for 1 second. Both the and indicators swill show,
this means that the function is activated.
TIMER ON TIMER OFF (Off – Start – Stop operation)
This feature is useful when you want to start the air conditioner before you wake up and stop it after you leave the
house.
Example:
To start the air conditioner in 2 hours after setting, and stop it 5 hours after setting.
Off Stop
Start
2 hours later
after setting
5 hours late
r
after setting
Set
Operation Manual - Serene 2 Remote Controller
Document: 9590-4010 Ver. 1 200819
Operation Manual Remote Controller
10
1. While the unit is OFF, press the button until timer indicator is shown.
2. Press the or buttons to adjust the time.
3. Point the remote controller to the indoor unit and wait for 1 second. The indicator will show, means that the
function is activated.
4. Press the button until timer indicator is shown.
5. Press the or buttons to adjust the time.
OFF Indicator
6. Point the remote controller to the indoor unit and wait for 1 second. Both the and indicators will show,
means that the function is activated.
NOTE
When setting the TIMER, the adjustable increment is 30 minutes up to 10 hours. After 10 hours the increment will be 1
hour up to 24 hours.
NOTE
Indoor unit must show on or OF when button is pressed. If this does not happen timers will show as set on remote
control but will not function on the unit.
Table des matières
Autres manuels ActronAir Télécommande
Manuels Télécommande populaires d'autres marques
Panasonic
Panasonic EUR7622KB0 Manuel utilisateur
Bang & Olufsen
Bang & Olufsen Beo4 Manuel utilisateur
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur
Multiplex
Multiplex PROFI TX 9 Manuel utilisateur
One Remote
One Remote RMB4 Manuel utilisateur
FUTABA
FUTABA 9ZAP - PART2 Manuel utilisateur
