Active SE02 Manuel utilisateur
Instruction Manual
MODEL NO. SE02 The Active 2.0 (SE02) is a tool only oering which
can be customized to suit your own accessory
requirements. Kindly note of limitations on
accessories which can be used with the tool as
specified in the user manual.
Congratulations on the purchase of your new
ACTIVE™ pressure washer. In order to ensure you
have the best possible experience, please read
through the following instructions.
If you require any help, please contact the
customer service department at: 1-844-777-4555
1800 PSI 2.0 GPM
Pressure
Washer
Version: 2022 V0
2
Table of Contents
1. IMPORTANT PRECAUTIONS...................................................................................... 3
1.1 Definitions................................................................................................................................................... 3
1.2 Safety Warnings ....................................................................................................................................... 3
1.3 Intended Application............................................................................................................................. 5
2. SAFETY FEATURES AND ELECTRICAL INFORMATION ........................................... 5
2.1 Extension Cords....................................................................................................................................... 5
3. EXPLODED VIEW......................................................................................................... 6
4. PARTS LIST.................................................................................................................. 6
5. ASSEMBLY INSTRUCTIONS....................................................................................... 7
5.1 Surface Preparation .............................................................................................................................. 7
5.2 Water Supply (Cold Water Only)......................................................................................................... 7
5.3 Safety Advice............................................................................................................................................. 7
5.4 Assembly Steps ........................................................................................................................................ 8
6. OPERATING INSTRUCTIONS................................................................................... 10
6.1 Shutting Down and Cleaning Up......................................................................................................10
6.2 Taking Breaks...........................................................................................................................................10
6.3 Warnings.....................................................................................................................................................10
7. WINTERIZING AND LONGTERM STORAGE .......................................................... 11
7.1 Optimum Winterizing Procedure ....................................................................................................11
7.2 Quick Winterizing Procedure............................................................................................................11
8. CLEANING AND MAINTENANCE............................................................................. 12
8.1 Connections .............................................................................................................................................12
8.2 Cleaning the Nozzle ..............................................................................................................................12
8.3 Water Filter Screen ...............................................................................................................................12
9. TECHNICAL SPECIFICATIONS................................................................................. 12
10. TROUBLESHOOTING.............................................................................................. 13
11. WARRANTY............................................................................................................. 15
3
Important Precautions
1. Important Precautions
IMPORTANT, RETAIN FOR FUTURE REFERENCE
AND READ CAREFULLY!
Do not attempt to install or operate this device
until you have read the safety instructions in this
manual. Safety items throughout this manual
are labelled with Danger, Warning, or Caution
depending on the risk type.
Failure to follow or comply with the instruction
manual in product set-up, usage or storage will
void the warranty.
1.1 Definitions
This is the safety alert symbol. It is used to alert
you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid
possible injury or death.
1.2 Safety Warnings
DANGER
Indicates an imminently hazardous situation
which, if not avoided, will result in death or
serious injury.
DANGER
To reduce the risk of fire, electric shock, explosion
or injury to people, read the following:
•This product is intended for domestic outdoor
use only.
•The water spray must never be
directed towards any electric
wiring, devices, or directly towards
the pressure washer itself, or fatal
electric shock may occur.
•The pressure washer should not be used in
areas where gas vapours may be present. An
electric spark could cause an explosion or fire.
•Risk of explosion. When a combustible
liquid is sprayed, there can be danger of
fire or explosion, especially in a closed area.
Therefore, do not spray flammable liquids. Do
not use acids and solvents with this product
either. These products can cause physical
injuries to the operator and irreversible
damage to the device.
•Risk of electric shock. Inspect the cord before
using the device — do not use it if the cord is
damaged.
•Risk of injury. Do not direct the
water flow at people. The high-
pressure jet can be dangerous if
misused, and therefore must not
be directed at people, animals,
electrical devices or the unit itself.
•This device is capable of producing
high pressure as rated in the Technical
Specifications. To avoid rupture and injury, do
not operate this machine with components
rated less than the unit itself (including but
not limited to spray guns, hose, and hose
connections).
WARNING
Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION
Indicates a potentially hazardous situation
which, if not avoided, could result in minor or
moderate injury.
IMPORTANT
Installation, operation, or maintenance information
which is important but not hazard-related.
4
1. Important Precautions (cont.)
1.2 Safety Warnings (cont.)
WARNING — INJECTION HAZARD
• Equipment can cause serious injury if the
spray penetrates the skin. Do not point the
gun at anyone or any part of the body. In case
of penetration, seek medical aid immediately.
CAUTION — DETERGENTS
• This device has been designed for use with
detergents that are specifically approved
for pressure washer use. The use of other
cleaning detergents may aect the operation
of the device and void the warranty.
CAUTION — SPRAY GUN
• The spray gun kicks back, so hold it with both
hands. The trigger gun safety lock prevents
the trigger from being engaged accidentally.
However, the safety feature DOES NOT lock the
trigger in the ON position.
CAUTION — WATER CONNECTIONS
• For use with fresh and clean water only. Do not
use this product with other liquids.
• The water supply system must be protected
against backflow.
• Never use this product with water
contaminated with solvents (e.g. paint
thinners, gasoline, oil, etc.).
• Always prevent debris from being drawn into
the product by using a clean water source and
an additional water filter, if required.
• If this device is connected to a potable water
system, the system must be protected against
backflow.
• Suitable water temperature: from 5 to 40 °C (41
to 104 °F).
CAUTION — USE
• Learn how to stop the device and release the
pressure quickly. Familiarize yourself with the
controls.
• Keep all connections dry and o the ground.
• Avoid accidental starts. Shut power OFF before
connecting or disconnecting the power cord.
• Never carry the pressure washer by the cord.
• Do not pull on the cord to disconnect from
the outlet.
• To allow for free air circulation, the pressure
washer should not be covered during
operation.
• Do not operate the product when tired or
under the influence of alcohol or drugs.
• Do not stand on unstable surfaces. Stand with
both feet balanced at all times.
• Keep the operating area clear of people
and pets.
IMPORTANT — MAINTENANCE
• Any assembly, use or maintenance of the
product must be carried out by adults only.
• Follow the maintenance instructions specified
in the manual.
• If replacement of the power plug or cord is
needed, use only identical replacement parts.
• Repairing and replacing parts should be done
by a certified technician.
• Before servicing, cleaning or removal of any
parts, shut the power OFF and release the
pressure.
IMPORTANT — GROUNDING
• In a double-insulated product, two systems of
insulation are provided instead of grounding.
No grounding is provided on a double-
insulated product, nor should a means for
grounding be added to the product. Servicing
a double-insulated product requires extreme
care and knowledge of the system, and should
be done only by qualified service personnel.
Replacement parts of a double-insulated
product must be identical to the parts they
replace. A double-insulated product is marked
with the words “DOUBLE INSULATION” or “DOUBLE
INSULATED”. The symbol may also be marked
on the product.
Important Precautions
5
1. Important Precautions (cont.)
1.3 Intended Application
This product is designed for specific residential
applications. Do not modify or use this product
for any application other than the one it was
designed for. This equipment was not designed for
industrial use. Please refer to the icons below for
suggested applications. For questions regarding
other uses, please refer to our website at www.
activeproducts.com or call us at 1-844-777-4555.
2. Safety Features
and Electrical Information
The pressure washer is equipped with a stop
device that senses when the trigger on the spray
gun is released. It will open the power circuit to
the motor and cause the pressure washer motor
to stop. The motor will start again when the trigger
is pulled.
WARNING
• The pressure washer is also equipped with a
main power ON/OFF switch. It should always be
moved to the OFF position when the pressure
washer is not being used to prevent possible
injury or damage.
CAUTION — USE A SUFFICIENT GAUGE
• Maximum cable length: 50’ (15 m). Only use 14
AWG rated extension cords.
• Only use extension cords that are intended
for outdoor use. These extension cords are
identified by a marking that reads “Acceptable
for use with outdoor appliances; store indoors
while not in use.”
• Only use extension cords that have an
electrical rating not less than the rating of the
product (15 A).
• Do not use damaged extension cords. Examine
the extension cord before using and replace
it if damaged. Do not abuse extension cords
and do not pull on any cord to disconnect the
device.
• Keep cord away from heat and sharp edges.
• Always disconnect the extension cord from
the power outlet before disconnecting the
extension cord from the product.
• To reduce the risk of electric shock, keep all
connections dry and o the ground. Do not
touch the plug with wet hands.
IMPORTANT — APPLICATIONS
STAIRS LAWN EQUIPMENT VEHICLE
FENCING DECK OR PATIO GARAGE FLOOR
DRIVEWAY SIDING
2.1 Extension Cords
If possible, do not use extension cords with this
product. However, if you must use one, observe all
warnings and instructions listed below:
Important Precautions /
Safety Features and Electrical Information
6
Exploded View / Parts List
4. Parts List
Item # Part Name Qty. Part #
A Main unit 1 SE01-001-0000
B Tips kit (4 pcs) 1 VE50-020-0004
Item # Part Name Qty. Part #
N/A Water filter 1 Pre-attached on
the machine
N/A Clean needle 1 Pre-attached on
the machine
A
B
* Attached Velcro strap to power cord for easy storage
Tips kit
0º15º
40º25º
0° (Red): For tough spots and grimes (e.g.,
concrete surfaces).
15° (Yellow): For medium and heavy duty cleaning
tasks (e.g., driveway).
25° (Green): For general cleaning around the
house (e.g., patios, patio furniture, decks, siding).
40° (White): For light duty jobs (e.g., stucco walls,
glossy surfaces).
7
5. Assembly Instructions
5.1 Surface Preparation
Before beginning any cleaning task, it is important to inspect the area for objects that could create
a hazard. Remove any objects from the work area that could be tripped over, such as toys or outdoor
furniture. Ensure that all doors and windows are closed tightly.
5.2 Water Supply (Cold Water Only)
Only draw water through the unit. The device must be used with cold water supply only. The water hose
must be at least 1/2” (13 mm) in diameter. The water flow rate must not fall below 2 GPM (7.6 LPM). The
flow rate can be determined by running water for one minute into an empty container. The water supply
temperature must not exceed 40 °C (104 °F).
5.3 Safety Advice
CAUTION
• Never use the pressure washer to draw in water contaminated with solvents (e.g. paint thinners,
gasoline, oil, etc.).
• Dirt in the water inlet will damage the unit. To avoid this risk, we recommend checking the water filter
(located inside the water inlet. To clean it out, refer to the Cleaning and Maintenance section).
• Always prevent debris from being drawn into the unit by using a clean water source and an additional
accessory water filter, if required.
• To prolong the life of the unit, let it rest for 5 minutes aer every 30 minutes of use.
• Check to make sure you have all the parts.
Assembly Instructions
8
5. Assembly Instructions (cont.)
5.4 Assembly (cont.)
Plug GFCI into power receptacle. Firmly press and release
the TEST button, then press and release the RESET button.
The light on the GFCI should be illuminated.
RESET
TEST
5
WARNING
Make sure your hands are dry. Plug the unit into an outlet.parts.
Assembly Instructions
1
3
6
2
4
Attach high-pressure hose to the gun and the
pump outlet (hand tighten only, do not use any
tape to secure connections). Ensure the hose
adapter to the pressure washer pump outlet is
a m22-14mm connection!
Connect garden hose to the inlet adapter.
(hand tighten only)
Release the safety trigger if it is locked.
Attach garden hose to water supply and turn
water on.
Attach the desired spray tip to the wand and
the wand to the pressure washer gun. secure
tightly (hand tighten only)
NOTE
High pressure hose can be an M22-14mm
hose of any length. Recommended hose
diameters are 3/8 and 1/4 inch
NOTE
Provided nozzles orifice size is 3.7
(Recommended aer market nozzles are
between 3.5 and 4.0)
The gun if possess a threaded connection
should be m22-14mm to pressure hose
9
5. Assembly Instructions (cont.)
5.4 Assembly (cont.)
Assembly Instructions
10 11
Purge air by squeezing the trigger on the gun
until there is a steady stream of water.
Push ON/OFF button, switch is set in ON position,
machine is ready to operate.
CAUTION
Drain unit aer each use (for storage):
remove water connection, turn ON the
machine for a few seconds and press gun
trigger to drain remaining water in the pump.
Turn OFF immediately.
PURGING
ON / OFF button
10
6. Operating Instructions (cont.)
6.1 Shutting Down and Cleaning Up
1Turn o water supply and disconnect the
garden hose from the water inlet on the
pressure washer.
2Pull the trigger to release any remaining
water pressure.
3Set the ON/OFF switch to the OFF position.
4Unplug the power cord from the outlet.
5Engage the safety lock on the spray gun.
1Engage the safety lock on the the
spray gun.
2Set the ON/OFF switch to the OFF position.
3Unplug the power cord from the outlet.
WARNING
Turn o the water supply and pull the trigger to
depressurize the device. Failure to do so might
result in personal injury due to discharge of
high-pressure water.
CAUTION
Failure to clean this product properly will cause
the detergent injection system to become
clogged and inoperable.
WARNING
Never use:
• Bleach, chlorine products or other
corrosive chemicals
• Liquids containing solvents
(i.e., paint thinners, gasoline, oils, etc.)
• Tri-sodium phosphate products
• Ammonia products
• Acid-based products
These chemicals will harm the unit and will
damage the surface being cleaned.
6.2 Taking Breaks
If taking a five minute or longer break while using the
pressure washer:
6.3 Warnings
Operating Instructions
Table des matières
Autres manuels Active Nettoyeur haute pression
