ACTiSYS ACT-IR204UN Manuel utilisateur

48511 Warm Springs Blvd., Suite 206, Fremont, CA 94539, USA

Tel: +1-510-490-8024

ax:+1-510-623-7268

Web: http://www.actisys.com E-mail: [email protected]

ACT-IR204UN

USB To Raw SIR Serial Adapter

Driver Software

User’s Manual

April 21, 2006

Version 1.3.2.1

The Wireless Connectivity Expert ACT-IR204UN

Driver Software User’s Manual

ACTiSYS Confidential Information

Page 2 of 28 Apr.21, 2006

Version 1.3.2.1

TABLE OF CONTENTS

REVISION HISTORY ............................................................................................... 3

1. FEATURES................................................................................................................ 4

2. PACKAGE CONTENT.............................................................................................. 4

3. GENERAL SETUP PROCEDURE ........................................................................... 4

4. INSTALL DRIVER FOR WINDOWS 2000 & WINDOWS 98SE .......................... 5

4.1 Install Driver For The First Time & Detection.........................................................................5

5. UNINSTALL DRIVER FROM WINDOWS XP, WINDOWS 2K & WINDOWS

98SE............................................................................................................................8

5.1 Method 1- UnInstall From Device Uninstaller .........................................................................8

5.2 Method 2- Uninstall From “Add/Remove Programs”...............................................................8

6. INSTALL DRIVER FOR WINDOWS-XP ............................................................. 10

7. TROUBLESHOOTING DRIVER INSTALLATION ............................................. 15

8. COMPORT UTILITY .............................................................................................. 22

9. OPERATION OF ACT-IR204UN ........................................................................... 23

9.1 Establishing IR Connection With Another PC ........................................................................24

9.2 Symptom & Solution...............................................................................................................24

10. ACT-IR204UN ADAPTER DIMENSIONS............................................................ 25

11. WARRANTY INFORMATION.............................................................................. 26

12. CONTACT INFORMATION .................................................................................. 28

The Wireless Connectivity Expert ACT-IR204UN

Driver Software User’s Manual

ACTiSYS Confidential Information

Page 3 of 28 Apr.21, 2006

Version 1.3.2.1

REVISION HISTORY

Revision History

Revision Date Comment

1.0 11/15/2004 • Initial release.

1.1 01/15/2005

• Modified cover and added index

1.2 04/06/2005

• Added usage

1.3 08/10/2005

• Added release note & a chapter for Appendix

1.3.1 03/13/2006

• Modified the dongle picture & added WEEE logo

• Deleted all the dongle name of ACT-IR404UN & overall reformat

• Added Troubleshooting Chapter and merged Appendix Chapter into it.

1.3.2 04/07/2006

• Added Chapter 2 Package Content, Chapter 3 General Setup Procedure

& Chapter 8 COMPort utility

• Revised Chapter 11 Characteristics & Specification

1.3.2.1 04/21/2006

• Consolidated Chapter of Characteristics & Specification into Data Sheet

Release Note For Driver Of ACT-IR204UN

Version Date Note

1.0.0.5 10/19/2004

• Original release.

1.0.0.7 06/06/2005

• This driver addresses the issue of COM port receiving the data when it is

disconnected and connected back. Basic validation of this driver has been

carried out on Win XP/SP2.

1.0.0.9 03/08/2006

• Fixed the installation problem caused by MCS7703 driver (for WinXP).

• Solved the Operating System crashed issue(for some model of Dell PC)

The Wireless Connectivity Expert ACT-IR204UN

Driver Software User’s Manual

ACTiSYS Confidential Information

Page 4 of 28 Apr.21, 2006

Version 1.3.2.1

1. FEATURES

ACT-IR204UN is an USB-to-RAW SIR serial adapter which will generate a virtual COM port in

Windows system, let user send/receive Raw IR data to/from other IR devices without IrDA protocols

needed.

And its driver will help user make IR connection without the need to change any Application Software in

their PC without RS-232 COM-port support. The ACT-IR204UN Windows driver will create one or two

virtual COM-port for user’s PC with USB port (USB Spec 1.1 compliant). So that user can transfer files

or data with Windows connection program, e.g. “HyperTerminal”, to set up serial UART connection of

COM-port # and baud rate.

For details of its characteristics and specification, please refer to Chapter 5 of ACT-IR204UN Hardware

Data Sheet.

2. PACKAGE CONTENT

ACT-IR204UN package contains the following items:

1). ACT-IR204UN USB to Serial SIR Adapter x1

2). Installation CD x1, which includes:

a. Device Installation Driver: USirSetup.exe

b. Device Uninstallation Driver: UsirUnst.exe

c. Com Port Detecting Utility: ACT-IR204UN_ComUtility.exe

d. Data sheet

e. User’s Manual

3. GENERAL SETUP PROCEDURE

Please observe the following steps to set up your ACT-IR204UN adapter:

a) Insert the installation CD and it will run Driver Installation into your PC automatically. (Please refer

Chapter 4 & 6 for installation procedure).

b) Plug your ACT-IR204UN adapter into USB port of PC. It will lead you to a “Found New Hardware”

procedure to complete the installation. ( Please also refer Chapter 4 & 6 for the details.)

c) Run COM port detecting utility: “ACT-IR204UN_ComUtility.exe” if and only if your PC is under

Windows 2000 or Windows XP. Without normally going to the Device Manager checking

procedure, this utility could be much simpler and easier to detect the COM port for you.

The Wireless Connectivity Expert ACT-IR204UN

Driver Software User’s Manual

ACTiSYS Confidential Information

Page 5 of 28 Apr.21, 2006

Version 1.3.2.1

4. INSTALL DRIVER FOR WINDOWS 2000 & WINDOWS 98SE

4.1 Install Driver For The First Time & Detection

a) Make sure that the USB dongle is NOT plugged into your PC at this time. Please do not plug the

USB dongle into your PC until you are instructed to do so.

b) Put the ACT-IR204UN CD-ROM in your PC CD/DVD Drive. In most cases this should start to

install automatically. If it does, proceed to STEP c). If it does not, open up your “My Computer”

window, and Explore the CD contents.

Following contents can be seen in the driver disk of ACT-IR204UN:

Double click “USirSetup.exe” in above window to install the drivers.

c) A popup screen appears. Click “Install” to proceed further.

The Windows system will install ACT-IR204UN device driver on your computer.

The Wireless Connectivity Expert ACT-IR204UN

Driver Software User’s Manual

ACTiSYS Confidential Information

Page 6 of 28 Apr.21, 2006

Version 1.3.2.1

d) When this installation completed, click “Exit”

e) Reboot your computer!

f) Now connect ACT-IR204UN IR adapter to USB port of your PC. The Windows system will display

a pop-up “Found New Hardware” window with two messages.

The first message is ”ACTiSYS ACT-IR204UN USB Serial IR Adapter” and then the second

message is “ACT-IR204UN USB Serial IR Port “. Below is the second message window.

g) Now this completes the installation of ACT-IR204UN Serial IR driver. And you can see the

installation driver being installed from “Add / Remove Program” under “Control Panel” as

follows:

The Wireless Connectivity Expert ACT-IR204UN

Driver Software User’s Manual

ACTiSYS Confidential Information

Page 7 of 28 Apr.21, 2006

Version 1.3.2.1

h) To confirm if the installation is successful, look at the window from Device Manager as follows:

• Click Windows toolbar startControl Panel{control Panel window}

• select “System”{System Properties window}

• select “Device Manager” {Device Manager Window}

• Select “Ports (COM & LPT)”

You should see the device installed under Ports (COM & LPT) and Universal Serial Bus

Controllers.

i) If you have two USB Ports , and you have two ACT-IR204UN IR adapters to plug into the same

PC, you can see two new USB serial Ports－＞ (COM & LPT) in “Device Manager” under “Control

Panel”. But in order to identify which port applied to which adapter, you had better check the first

adapter’s COM port before you plug in the second adapter into PC.

Note: You could also run the utility program ACT-IR204UN-ComUtility.exe to detect the COM Port if

your PC runs under Windows 2000/Windows XP. Please refer Chapter 8 COMPORT UTILITY for

detecting the COM port number of ACT-IR204UN device.

The Wireless Connectivity Expert ACT-IR204UN

Driver Software User’s Manual

ACTiSYS Confidential Information

Page 8 of 28 Apr.21, 2006

Version 1.3.2.1

5. UNINSTALL DRIVER FROM WINDOWS XP, WINDOWS 2K & WINDOWS

98SE

5.1 Method 1- UnInstall From Device Uninstaller

Please execute the “UsirUnst.exe” from the ACT-IR204UN driver CD to uninstall the drivers.

5.2 Method 2- Uninstall From “Add/Remove Programs”

a) Double click “Add/Remove Programs” under “Control Panel”.

b) Select: “ACTiSYS ACT-IR204UN USB Serial IR Adapter” and click “Change/Remove”.

The Wireless Connectivity Expert ACT-IR204UN

Driver Software User’s Manual

ACTiSYS Confidential Information

Page 9 of 28 Apr.21, 2006

Version 1.3.2.1

c) You should see the screen below. Click OK to continue.

d) You should see the screen below.

e) After uninstallation completed, you should see the screen bleow. Take out the dongle from USB

port. Click “Reboot Now” to reboot. This should complete the uninstallation.

The Wireless Connectivity Expert ACT-IR204UN

Driver Software User’s Manual

ACTiSYS Confidential Information

Page 10 of 28 Apr.21, 2006

Version 1.3.2.1

6. INSTALL DRIVER FOR WINDOWS-XP

Please follow the same Steps of a) to c) from Chapter 4, section 4.1.

d). You may see the following Warning message twice: “The software you are installing has not

passed Windows Logo testing to ….”. Select “Continue Anyway” each time.

f) After installation, you should see the screen.below:

g) Click “Exit” to complete the installation. Then reboot your system.

Table des matières

Autres manuels ACTiSYS Adaptateur

ACTiSYS

ACTiSYS IR100SLM Manuel utilisateur

ACTiSYS

ACTiSYS IR303FM Manuel

ACTiSYS

ACTiSYS IR4000US Manuel utilisateur

ACTiSYS

ACTiSYS ACT-WF8000U Manuel utilisateur

ACTiSYS

ACTiSYS ACT-IR100UD Manuel utilisateur

ACTiSYS

ACTiSYS ACT-IR100UD-MDT Manuel utilisateur

ACTiSYS

ACTiSYS IR220Li Mode d’emploi

ACTiSYS

ACTiSYS BT5900US Manuel utilisateur

ACTiSYS

ACTiSYS ACT-IR100MU Manuel utilisateur

ACTiSYS

ACTiSYS ACT-IR220L Manuel utilisateur

ACTiSYS

ACTiSYS ACT-IR100M+ Manuel utilisateur

ACTiSYS

ACTiSYS ACT-IR320L Manuel utilisateur

ACTiSYS

ACTiSYS ACT-IR100SD OBEX Server Manuel utilisateur

ACTiSYS

ACTiSYS ACT-IR220L Manuel utilisateur

ACTiSYS

ACTiSYS ACT-IR100SD OBEX Server Manuel utilisateur

ACTiSYS

ACTiSYS BT5100US Manuel utilisateur

ACTiSYS

ACTiSYS ACT-IR200L Manuel utilisateur

ACTiSYS

ACTiSYS RS232 Manuel utilisateur

ACTiSYS

ACTiSYS ACT-IR100UD Manuel utilisateur

ACTiSYS

ACTiSYS ACT-IR210L Manuel utilisateur

ACTiSYS

ACTiSYS ACT-IR8250SW Manuel utilisateur

ACTiSYS

ACTiSYS ACT-IR100MU Manuel utilisateur

ACTiSYS

ACTiSYS BT5701S Manuel utilisateur

ACTiSYS

ACTiSYS IR100M Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur