E. Installation
Attach the bottom of the camera to the mounting base
using the provided thumbscrew (Fig.3). Select the lo-
cation for the camera (transmitter) NOTE: The location
must be within 100 feet of the monitor (receiver) Place
the camera in your selected location. You can attach
the camera to walls or other flat surfaces by the use of
screws (two holes provided, screws not included),
double sided tape or fastening method.
F. External Signal Sources Input
Besides the built-in camera as a signal source, there
is anAV Input Jack on the transmitter for external signal
source such as DVD Player, Video Cassette Player,
game console, etc.
G. Camera Setup
1. Make sure the transmitter and receiver are set at
the same channel (1, 2, 3 or 4). The channel can
be customized corresponding to any signal source.
With the channel switch, the receiver can receive
the 2.4GHz wireless audio/video signals from up
to 4 cameras (transmitters) in order to monitor a
series of rooms for maximum supervision of the
home (or office).
2. Connect the AC adapter to the camera and switch
the transmitter ON.
3. Adjust the angle and focus for the camera lens for
best image.
7
