aci CLASSIC Fibre Manuel utilisateur
Mark your territory...
LASER MARKING SYSTEMS
Operating Instructions
Workstation CLASSIC Fibre
Workstation CLASSIC Fibre XL
This product conforms to the requirements of the Directive 2006/42/EC on machinery.
The CE symbol is located on the type plate.
Manufacturer: ACI Laser GmbH
Steinbrüchenstraße 14
D-99428 Grammetal OT Nohra
Germany
Phone: +49 3643 4152-0
Fax: +49 3643 4152-77
www.ACI-Laser.de
We are constantly working on further developments.
Therefore, please understand that we must reserve the right to change the scope of the delivery in respect
of the form, equipment and technology at any time.
Reprinting, copying or translating this document in whole or in part is forbidden without the express written
permission of ACI Laser GmbH!
All rights under the copyright laws are expressly reserved by ACI Laser GmbH.
The manufacturer shall only be responsible for the safety characteristics of this device within the scope of
the legally applicable regulations if it is operated by the user in accordance with the operating instructions
and repaired by ACI Laser GmbH itself or someone appointed by and acting under the instructions of ACI
Laser GmbH.
© ACI Laser GmbH
Last update: 08/2019-03
Table of Contents
3
Table of Contents
1 Introduction ..................................................................................................................7
2 Important Information .................................................................................................. 7
2.1 Intended Use ................................................................................................................................. 8
2.2 Improper Use ................................................................................................................................ 8
2.3 Notices in the Document ............................................................................................................. 9
2.4 Warranty ...................................................................................................................................... 10
2.5 Technical Customer Service ..................................................................................................... 11
3 Safety .......................................................................................................................... 12
3.1 Basic Safety Instructions .......................................................................................................... 12
Laser safety .................................................................................................................................. 12
Emissions ..................................................................................................................................... 13
General ......................................................................................................................................... 13
Start up ......................................................................................................................................... 13
Operation ...................................................................................................................................... 14
Maintenance/care ......................................................................................................................... 14
3.2 Labels at the Device ................................................................................................................... 15
Warning signs ............................................................................................................................... 15
Type plate ..................................................................................................................................... 16
4 Description ................................................................................................................. 17
4.1 Intended Purpose ....................................................................................................................... 17
4.2 Views of the Device .................................................................................................................... 18
Front side ..................................................................................................................................... 18
Rear side ...................................................................................................................................... 19
4.3 Technical Specifications ........................................................................................................... 20
Laser marking system .................................................................................................................. 20
Table of Contents
4
Usable mounting area of the T-slot plate ..................................................................................... 20
Adjusting the height with the focus finder function ....................................................................... 20
Positioning and repetition accuracy ............................................................................................. 20
Safety door ................................................................................................................................... 20
Max. component heights and marking fields ................................................................................ 20
Maximum working areas .............................................................................................................. 20
Laser protection screen ................................................................................................................ 21
Lighting ......................................................................................................................................... 21
Extraction ..................................................................................................................................... 21
Operation ..................................................................................................................................... 21
Laser protection class .................................................................................................................. 21
Interfaces ..................................................................................................................................... 21
Electrical data ............................................................................................................................... 21
Operating conditions .................................................................................................................... 22
Weight without laser ..................................................................................................................... 22
Options ......................................................................................................................................... 22
4.4 Scope of Delivery ....................................................................................................................... 22
5 Installation ..................................................................................................................23
5.1 Unpacking ................................................................................................................................... 23
5.2 Setting Up ................................................................................................................................... 24
5.3 Assembly .................................................................................................................................... 25
5.3.1 Connections ................................................................................................................................. 25
Rear side ...................................................................................................................................... 25
Workroom ..................................................................................................................................... 25
5.3.2 Laser Marking Device Assembly .................................................................................................. 26
5.3.3 Extraction Assembly ..................................................................................................................... 26
5.3.4 Power Connection ........................................................................................................................ 26
5.3.5 Connection of Supply Cable and Fiber Laser Cable .................................................................... 27
5.3.6 Connection with PC ...................................................................................................................... 28
Table of Contents
5
5.4 Checking the Installation ........................................................................................................... 28
6 Operation .................................................................................................................... 29
6.1 Operating and Display Elements ..............................................................................................29
Control panel ................................................................................................................................ 29
Emergency stop button ................................................................................................................ 30
6.2 Start ............................................................................................................................................. 31
6.3 Handling ...................................................................................................................................... 31
6.4 Fault Finding ............................................................................................................................... 32
7 Maintenance, Repair, Care ........................................................................................ 33
Cleaning ....................................................................................................................................... 33
8 Scrap Disposal ........................................................................................................... 34
9 Appendix ..................................................................................................................... 35
9.1 Wiring Diagram ........................................................................................................................... 35
9.2 Drawing of the T-Slot Plate ........................................................................................................ 37
9.3 Assembly Dimensions ............................................................................................................... 38
9.4 Drawing of the Axis Stroke ........................................................................................................ 40
9.5 Illustration of the Rotary Module .............................................................................................. 41
9.6 Illustration of the Working Areas .............................................................................................. 42
9.7 EC Conformity Declaration ........................................................................................................ 43
10 Index ............................................................................................................................ 45
Table of Contents
6
Introduction
7
1 Introduction
Dear customer,
Thank you for the confidence which you have shown in us by purchasing our quality prod-
uct. We would like to wish you every success with the use of the devices.
Make yourself familiar with these operating instructions before starting use. It tells you
how to use the new devices correctly and safely, and takes you step by step through the
actions which have to be performed before using it for the first time.
You will find more detailed information on the enclosed CD-ROM.
2 Important Information
Our products are developed and manufactured under strict quality monitoring to give a
long and fault-free service life.
This guarantees:
•highest quality and a long life,
•easy and safe operation,
•functional design,
•optimization for the intended purpose.
The Workstation CLASSIC Fibre is state-of-the-art. The Declaration of Conformity con-
firms that the manufacturer has complied with the relevant directives. The CE mark is lo-
cated on the type plate.
Please read these operating instructions carefully from the beginning in order to avoid er-
rors and risks.
Reference is made to residual hazards at the relevant places in the operating instructions.
Please also take note of the warning notice stickers on the device.
Important Information
8
2.1 Intended Use
•The Workstation CLASSIC Fibre is intended exclusively for use with the following la-
ser marking devices and the associated Magic Mark software:
Economy/Business Fibre DFL Ventus Marker
•Usage for the intended purpose includes observance of these operating instructions,
the operating instructions of the laser marking device, the instructions in the software
manual and the warning stickers on the device.
2.2 Improper Use
All other uses other than use for the intended purpose shall be deemed to be improper
use!
The workstation must not be used by:
•persons who have not read or understood these operating instructions,
•persons who have not been instructed in the proper operation,
•persons who are under the influence of alcohol and or drugs, or
•persons whose alertness is impaired by medicines or other influences.
The workstation must not be used:
•if protective/safety devices are bridged, defective or if they cannot reliably fulfil their
function,
•if there is a suspicion that direct or leakage radiation can emanate.
The supplier/manufacturer shall not be liable for personal injury or material damage result-
ing from improper use of the workstation itself or the safety devices.
Important Information
9
2.3 Notices in the Document
Take note of the warning notices, take the specified actions and observe the prohibitions.
A warning notice warns of a possible hazard and contains recommendations for prevent-
ing the hazard occurring. Key words indicate the type of hazard, symbols emphasise this
visually.
Follow the stated measures for preventing hazards to the operator or tangible material as-
sets.
The following classification of dangers are used in these safety instructions:
Additional information on working with the device and protection of the environmental are
emphasised as follows:
DANGER
RISK OF DEATH OR SERIOUS INJURIES!
Indication of an imminent danger, which will result in death or serious injuries if
the appropriate precautionary measures are not taken.
WARNING
DANGER OF INJURIES AND/OR RISK OF PROPERTY DAMAGE.
Indication of an immediately impending hazard which can cause serious injuries
or property damage if the appropriate precautionary measures are not taken.
CAUTION
RISK OF PROPERTY DAMAGE.
Indication of a possible hazard which may cause damages of the equipment if
the appropriate precautionary measures are not taken.
!
!
!
Important Information
10
2.4 Warranty
The manufacturer guarantees that the product does not have any manufacturing or mate-
rial defects.
The warranty period shall be 12 months from the dispatch date in as far as no other con-
tractual ruling has been made.
The scope of warranty is limited to the repair or replacement of the product supplied by
the manufacturer.
The manufacturer is responsible for returning repairs under warranty to the customer, the
customer is responsible for returning the device to the manufacturer.
The manufacturer does not accept any liability,
•if the product has been damaged by incorrect handling or operation, or as a result of
improper use,
•if seals on the device have been broken,
•for damage caused by use under unauthorized environmental conditions,
•for consequential damage.
NOTICE
Useful additional information and tips!
ENVIRONMENT
Protect the environment!
Instructions for observing environmental protection regulations!
Ce manuel convient aux modèles suivants
1
Table des matières
