Acer AL 1916W Manuel utilisateur

Acer LCD Display

Quick Start Guide

Important

Note: This product can only operate with the attached power accessories.

Before installing your LCD display, consider the following with reference to the conditions

under which the display is to be installed:













Make sure that the voltage of the product conforms to the local voltage.

Don’t allow children to operate the product alone.

For more information about safety, read the manual in the attached CD-ROM.

To minimize the reflection of the display, protect your eyes and ensure the premium

quality, don’t install your LCD display near windows or with backlight. Keep the display

away from your eyes by at least 30 cm.

The upper edge of the display should be a little higher than your sight.

Adjust the front and back angles of the display based on your visual angle so that you

can view the display comfortably.

Components and Accessories

LCD Display D-Sub Signal Cable Quick Start Guide User’s Manual (CD-ROM)

Power Cable DVI Signal Cable

(Optional)

Installation

Guide Note: Read the [Important] section carefully before starting the installation

Quick

Installation

Complete the following steps for quick installation: (See the figure)

Assemble the seat of the display

 Take out the seat out of the box and place it on a flat

table.

 Take your LCD display out of the carton and assemble

the display and seat along the rail. You will hear a click

sound when the display and seat are engaged correctly.

Connection to PC

 Make sure that the power supply of your PC is turned off

and the power plug is removed.

 Connect and fasten both ends of the signal cable to

your PC host and LCD display respectively.

 Connect the attached power cable to your LCD display.

 Plug the power cable to the receptacle.

 Turn on the power supplies of your PC and LCD display. XPower Cable

YDVI Signal Cable (Optional)

ZD-Sub Signal Cable

Adjustment of Display

Key Definition

1

Power Source Power On/Off

Green indication: Power is on and normal

Orange indication: Sleep status in the energy-saving

mode

Colorless indication: Power off

2 Menu OSD Menu Press this button to enter OSD. Press it again to exit OSD.

3 > Plus

4 < Minus

Press this button for selection or adjustment when OSD is

started.

5 Auto Automatic

Adjustment

Press this button to exit the manual when OSD is started.

Press this button for the display to optimize the position,

phase and clock pulse automatically when OSD is not

started.

Ce manuel convient aux modèles suivants

1

Table des matières

Autres manuels Acer Moniteur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation

LG

LG M1950D-PZ Manuel utilisateur