Switch the appliance off and unplug it before cleaning.
When the appliance is not in use switch it off and unplug it. Place the appliance out of reach of children.
Do not use the radiator near bath-tubs, showers, wash-basins or swimming-pools (minimum distance 1 meter).
Do not put the cable on top of the appliance when it is still warm.
The appliance will operate correctly when it is installed vertically.
Do not use the appliance near liquids or flammable materials.
Never operate the appliance immediately below an power outlet.
ATTENTION: Do not connect the appliance to a device such as a thermostat or a time switch to avoid
overheating risks when the heater is moved or covered.
Do not cover the appliance when it is running to avoid overheating risks.
In case the power cord is damaged send it to the nearest after sale service center recommended by the
manufacturer for the replacement.
Children, old people and disabled people are not often aware of the dangers, which can arise from improper
use of the appliance. The appliance should never be used without adult supervision.
Do not connect the appliance to extension cords or multi-plug outlets.
Do not damage or kink the power cord.
Before cleaning the appliance or carrying out any maintenance switch off the whole system.
If the appliance is malfunctioning, switch it off immediately. If any repair is required please contact only the after sale
service centers approved by the manufacturer and ask for original spare parts. Otherwise safety of the appliance
can be compromised.
COMPONENTS
1- Body frame
2- Base plate
3- Tip-over safety switch rod
4- Power cord
ASSEMBLY
Assemble the body frame and the base plate in the following sequence:
1. Remove the butterfly nuts from the lower part of the body frame.
2. Insert the power cord through the slot placed in the middle part of the base plate and then assemble the
body frame to the base plate.
3. Secure the body frame to the base plate by means of the two butterfly nuts previously removed. Insert the
power cord through the suitable slots and then fix it using the clamp.
OPERATION
Plug in the appliance. Check that the outlet has at least a 10 ampere current carrying capacity.
Models with switches
Select the power by operating the relevant switch.
The radiator can be activated manually by pressing the handle situated in the rear part of the appliance.
