AccuAir SwitchSpeed Manuel utilisateur

WARNING: Extended valve pulsing MAY reduce the life of your

valves.

Thank you for purchasing the revolutionary SwitchSpeed™ Controller by

AccuAir.

This air suspension controller manages up to 4 Air Springs as an intelligent

switchbox with user-adjustable control of valve speed. The AccuAir

SwitchSpeed™ also manages your Air Compressor(s) to keep onboard air

at an ideal pressure for your application (If Optional Electronic Tank Pressure

Sensor is connected).

To maximize functionality, the AccuAir SwitchSpeed™ allows you to select

from three distinct valve speeds:

1.) Full Speed.

2.) Medium Speed (Adjustable).

3.) Precision Speed (Adjustable).

The exact settings for each of these speeds is User Adjustable

(see page 10 in your Operation Manual).

At AccuAir, we pride ourselves on thorough customer service, quality

products, and a better driving experience through technologically

superior design.

Operation Manual

SwitchSpeed™ Controller:

Congratulations!

Description Page Number

Table Of Contents

Terms & Conditions

Service Disable & General Understanding

General Operation

Setup Programming

Operation Trouble Indication & Diagnosis

System Diagram

5-8

9-13

14-15

16-17

- Page 3 -

Terms & Conditions:

AccuAir Control Systems, L.L.C. is hereby referred to as ACCUAIR. The Pur-

chaser, end-user, or installer is hereby referred to as CUSTOMER.

Warranty

ACCUAIR will repair or replace any failed components for the life of the vehicle

given that the components were installed and operated as intended by

ACCUAIR. Upon the return of a failed component(s), ACCUAIR will determine

the cause of failure. If it is due to improper installation, or misuse of the system,

a repair charge will be assessed and the customer will be contacted before

work is performed or replacement parts are shipped. If the failure is due to faulty

parts, then ACCUAIR will repair or replace the failed components at their own

discretion and in a timely manner.

Legal Disclaimer

•ACCUAIR’s products must be installed by a qualied professional installation

facility as recommended by ACCUAIR.

•System operation and installation is at the CUSTOMER’s own risk. ACCUAIR

accepts no liability for damage of property or persons caused by its products,

components, accessories, installation instructions or otherwise.

•ACCUAIR accepts no responsibility for systems, products or components

provided by other manufacturers for use with or around the ACCUAIR system.

For components other than ACCUAIR’s, follow the manufacturer’s instructions

for installation and operation.

WARNING: No part of the vehicle should be able to contact the

ground when all air is out of the air springs.

- Page 4 -

General Understanding:

For simplicity of use and understanding we refer to the four wheels of a vehicle by

number. Instead of using “Left Front”, or “Right Front” etc. Refer to the following

diagram for labeling:

FRONT

CAUTION: For all under vehicle maintenance, you must rst

disable the air system by removing the main system fuse located near

the battery.

Service Disable:

- Page 5 -

Speed Selection #3:

While driving or parked, you may choose to

press the Speed #3 “ ” Button momentarily.

The Speed #3 “ ” Indicator will be lit solid. Now

use the Manual Adjustment Buttons to move the

vehicle at this selected speed.

Speed Selection #2:

While driving or parked, you may choose to

press the Speed #2 “ ” Button momentarily.

The Speed #2 “ ” Indicator will be lit solid. Now

use the Manual Adjustment Buttons to move the

vehicle at this selected speed.

Speed Selection #1:

While driving or parked, you may choose to

press the Speed #1 “ ” Button momentarily.

The Speed #1 “ ” Indicator will be lit solid. Now

use the Manual Adjustment Buttons to move the

vehicle at this selected speed.

General Operation:

- Page 6 -

All-Down:

While parked, you may choose to automatically

lower all four Air Springs to zero height. The system

will adjust at the currently Selected Speed. There

are two modes for this function:

(See page 11 for selecting Mode Type.)

TIMER:

Press the All-Down “ ” Button for 3 seconds.

The All-Down “ ” Indicator Light will ash while

lowering the vehicle and turn off based on a timer.

MOMENTARY:

Press the All-Down “ ” Button until the vehicle

is as low as you desire.

General Operation:

NOTE: This sequence can be stopped

immediately by pressing any of the Arrow

Buttons on the right side of the controller.

- Page 7 -

Manually Raise/Lower:

To Adjust Front Air Springs Together (1&2):

Press the Combination #1 & #2 UP “ ”

Button to FILL both Air Springs #1 & #2

together.

Press the Combination #1 & #2 DOWN “ ”

Button to EMPTY both Air Springs #1 & #2

together.

To Adjust Rear Air Springs Together (3&4):

Press the Combination #3 & #4 UP “ ”

Button to FILL both Air Springs #3 & #4

together.

Press the Combination #3 & #4 DOWN “ ”

Button to EMPTY both Air Springs #3 & #4

together.

General Operation:

- Page 8 -

Manually Raise/Lower, Cont:

General Operation:

To Adjust Air Spring #2:

Press the #2 UP “ ”

Button to FILL the

#2 Air Spring.

Press the #2 DOWN “ ”

Button to EMPTY the

#2 Air Spring.

To Adjust Air Spring #1:

Press the #1 UP “ ”

Button to FILL the

#1 Air Spring.

Press the #1 DOWN “ ”

Button to EMPTY the

#1 Air Spring.

To Adjust Air Spring #3:

Press the #3 UP “ ”

Button to FILL the

#3 Air Spring.

Press the #3 DOWN “ ”

Button to EMPTY the

#3 Air Spring.

To Adjust Air Spring #4:

Press the #4 UP “ ”

Button to FILL the

#4 Air Spring.

Press the #4 DOWN “ ”

Button to EMPTY the

#4 Air Spring.

- Page 9 -

Setup Programming:

Choosing Which Speed To Adjust

Select which speed you wish to

modify. The selected speed will

ash to display the rate that the

valves will be pulsed at.

(Description on Pg. 10)

150 200175

ALL-DOWN MODE TYPE.

(Description on Pg. 11)

Tank Pressure Mode: (Optional)

150 psi = White only

175 psi = White & Red alternating

200 psi = Red only

(Description on Pg. 12)

Adjusting Speeds:

(Description on Pg. 10)

DECREASE:

TIMER:

INCREASE:

Valve

ON-Time

INCREASE:

Valve

OFF-Time

MOMENTARY:

To check or change any of the programmed settings during operation, press the

Program “ ” Button momentarily to initiate Programming Mode:

NOTE: Program Mode will exit after 5 seconds or can be exited by pressing

the Program Button again and your changes will be saved.

Adusting Valve Speed:

- Page 10 -

Setting Speed Selections:

To Adjust Speed Selections:

With the Ignition ON, press the Program “ ”

Button momentarily to enter Program Mode.

NOTE: Program Mode will exit after 5 seconds

or can be exited by pressing the Program Button

again and your changes will be saved.

Now select which speed you want to adjust

by pressing the Speed #2 “ ” Button, or the

Speed #1 “ ” Button.

The Selected Speed Button will begin ashing to

indicate the current valve pulse rate.

Use the #1 UP “ ” and #1 DOWN “ ” Buttons

to INCREASE or DECREASE the

Valve ON-TIME Setting.

Use the #2 UP “ ” and #2 DOWN “ ” Buttons

to INCREASE or DECREASE the

Valve OFF-TIME Setting.

NOTE: Use the Paired UP “ ” & Paired

DOWN “ ” Buttons to test the current Speed

Selection while setting the Valve ON / OFF Time.

Setup Programming:

ON-TIME

— VALVE ON

OFF-TIME

— VALVE OFF

ON-TIME OFF-TIME

Table des matières

Autres manuels AccuAir Contrôleurs

AccuAir

AccuAir e-Level+ Manuel d'instructions

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur