Access Security Products DJ4M Manuel utilisateur

DJ4M

User Manual

Audio Handset

Read this manual carefully before using the product, and keep it well for future use

ACCESS SECURITY PRODUCTS LTD

1. Parts and Functions

Side View

187

150

Handset

Call button/Unlock 2nd button

Speaker

handset curve

Unlock button

Handset Pick up to communicate with the visitor

Handset cord Connect receiver with handset base

Unlock button Press to release the door lock

Call button/Un-

lock 2nd button

In standby mode, pick up the receiver, then press Call

button to activate the inner call; (Intercom)

During calling/talking state, press Unlock 2nd button

to release the second door lock (If installed)

Speaker Receive audio from the visitor

Key functions

ACCESS SECURITY PRODUCTS LTD

2. Terminal Descriptions

L2 L1

SW+SW-

1 2 3 4 5 6

ON DIP

1 2 3

DIP2

DIP1

L2 L1

SW+SW-

1 2 3 4 5 6

ON DIP

1 2 3

SW+,SW-

L1, L2

SW+,SW-: External door bell connection port

L1,L2: Bus line connection

K4: To change ring tone setting

K3: To change ring tone volume

DIP1(Bit1-6): To set the User Code of each handset

DIP2(Bit1-3): To set Slave Handset Address

3. Unit Mounting

1) Fix 2 screws to the wall at an appropriate height

2) Connect the system correctly

3) Attach the audio phone to the bracket

ACCESS SECURITY PRODUCTS LTD

4. Operation Instructions

5. Setup Instructions

1) Door release function: When a visitor calls from the door panel, the handset rings,

pick up the receiver to talk with the visitor, then press the Unlock button to open the

door. If the system is connected with 2 lock releases, press Unlock 2nd button to open

the second door release

2) Inner call:(Intercom) Pick up the receiver, then press CALL button to activate

the inner call, all handsets connected to the system will ring at the same time. Pick up

any handset and the others will stop ringing immediately. (Note that the user code must

be the same for all handsets to activate the inner call function)

3) Door Bell Call Button:An additional door bell button can be connected to the

handset, so that the visitors can ring the door bell again in front of the user’s apartment

5.1 User Code Setting (DIP1 required)

Each apartment must have a unique identification called a User Code. The DIP1

switches are used to congure the User Code for each handset

• Bit-1-5 of DIP1 are used to create the User Code setting. The value is from 1 to 32,

which have 32 different codes for 32 apartments

• Bit-6 of DIP1 is used as an end of line termination

Note: DIP1 is NOT required with the single button audio entry system

Bit state User Code Bit state User Code Bit state User Code

1 2 3 4 5 6

Code=1

1 2 3 4 5 6

Code=12

1 2 3 4 5 6

Code=23

1 2 3 4 5 6

Code=2

1 2 3 4 5 6

Code=13

1 2 3 4 5 6

Code=24

1 2 3 4 5 6

Code=3

1 2 3 4 5 6

Code=14

1 2 3 4 5 6

Code=25

1 2 3 4 5 6

Code=4

1 2 3 4 5 6

Code=15

1 2 3 4 5 6

Code=26

1 2 3 4 5 6

Code=5

1 2 3 4 5 6

Code=16

1 2 3 4 5 6

Code=27

ACCESS SECURITY PRODUCTS LTD

5.2 Slave Address Setting (DIP2 required)

When multi handsets are installed in one apartment, these handsets have to use the

same User Code setting, and the Master/Slave mode should be set on each handset

• Bit-1-2 of DIP2 are used to set the slave address setting

Bit state User Code Bit state User Code Bit state User Code

1 2 3 4 5 6

Code=6

1 2 3 4 5 6

Code=17

1 2 3 4 5 6

Code=28

1 2 3 4 5 6

Code=7

1 2 3 4 5 6

Code=18

1 2 3 4 5 6

Code=29

1 2 3 4 5 6

Code=8

1 2 3 4 5 6

Code=19

1 2 3 4 5 6

Code=30

1 2 3 4 5 6

Code=9

1 2 3 4 5 6

Code=20

1 2 3 4 5 6

Code=31

1 2 3 4 5 6

Code=10

1 2 3 4 5 6

Code=21

1 2 3 4 5 6

Code=32

1 2 3 4 5 6

Code=11

1 2 3 4 5 6

Code=22

5.2.1 When Bit-3 of DIP2 set to OFF, the Bit-1-2 of DIP2 are used to set the master/

slave address setting:

DIP2 state Master/Slave type

1 2 3

Master handset

1 2 3

Slave handset 1

1 2 3

Slave handset 2

1 2 3

Slave handset 3

ACCESS SECURITY PRODUCTS LTD

5.3 Ring Tone Setting

There are four groups ring tones to choose from:

Group name Items Tunes

Group 1

Door Panel DINGDONG

Intercom Call TELEPHONE_RING

Door Bell DINGDONG

Group 2

Door Panel JINGLE_DELL

Intercom Call CARMAN

Door Bell FOR_ALICE

Group 3

Door Panel HAPPY_BIRTHDAY

Intercom Call SONATINE

Door Bell CONGRATULATE

Group 4

Door Panel DOREME

Intercom Call RHYTHM_OF_THE

Door Bell EDELWEISS

ACCESS SECURITY PRODUCTS LTD

2) Pick up the receiver in standby mode and press the K4 switch to replace a group of

ring tones. Four groups of ring tones cycle:

Group1 Group2 Group3 Group4

press K4 press K4 press K4

press K4

3) Put the receiver down to exit the settings

5.4 Ring tone Volume Setting

1) There are three kinds of ring tone volume (low-range, mid-range and high-range) to

choose from

2) Pick up the receiver in standby mode and press the K3 switch to adjust the volume

Low-range Mid-range High-range

press K3 press K3

press K3

3) Put the receiver down to exit the settings

6. Specication

●Power Supply: DC24V

●Power Consumption: standby 2.1mA, working 75.9mA

●Wiring: 2 wires, non-polarity

●Dimension: 187(H) X 97(W) X 33(D) mm

The design and specications can be changed without notice to the user. Right to interpret and copyright of this manual are preserved.

ACCESS SECURITY PRODUCTS LTD

Table des matières

Autres manuels Access Security Products Système d'interphone

Access Security Products

Access Security Products DE-596/KP Manuel utilisateur

Manuels Système d'interphone populaires d'autres marques

Bticino

Bticino LINEA 3000 Manuel utilisateur

MSI

MSI MSI-140 Manuel utilisateur

golmar

golmar Stadio Plus Manuel utilisateur

CyberData

CyberData 011211 series Manuel

Vidos

Vidos duo M1021 Manuel utilisateur

Vimar

Vimar ELVOX 7539/E Manuel utilisateur

SSS Siedle

SSS Siedle BTSV 850-03 Manuel utilisateur

Dahua

Dahua VTO Series Manuel utilisateur

Elvox

Elvox 5651 Manuel utilisateur

Videx

Videx VIDEOKIT Series Manuel utilisateur

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuel utilisateur

Viking

Viking E-35-EWP Manuel utilisateur

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuel utilisateur

SSS Siedle

SSS Siedle BFCV 850 Series Manuel utilisateur

GRD

GRD MAX V2 Manuel utilisateur

Alecto

Alecto ADI-250 Manuel utilisateur

Aiphone

Aiphone IE-8MD Manuel utilisateur

Perel

Perel EDB4 Manuel utilisateur