Abus Eyseo TV7057 Manuel utilisateur

Eyseo 35x Auto Focus

Camera Day / Night

TV7057

Contents

1. Preface ..........................................................................................................30

2. Scope of delivery...........................................................................................32

3. Features ........................................................................................................32

4. Precautions....................................................................................................33

5. Installing instructions ....................................................................................35

6. Description of the rear side of the camera.....................................................36

7. Display of the on-screen menu......................................................................39

8. Programming menu.......................................................................................42

9. Connecting a control unit...............................................................................52

10. Installation......................................................................................................53

11. Technical data ...............................................................................................54

1. Preface

Dear Customer,

Thank you for purchasing this Eyseo auto focus camera. You made the right

decision in choosing this state-of-the-art technology, which complies with the current

standards of domestic and European regulations. The CE has been proven and all

related certifications are available from the manufacturer (www.abus-sc.com) upon

request.

To maintain this status and to guarantee safe operation, it is your obligation to

observe these operating instructions.

The Eyseo auto focus camera is equipped with a 1/4” SONY Super HAD CCD image

sensor and digital signal processor. The all state circuitry provides extremely long life

and a high level of reliability. The cameras use class A microelements that are

resistant to external electromagnetic fields. They offer cutting-edge technology for

advanced video surveillance.

©ABUS Security-Center GmbH, August 2008

Every effort has been made to ensure that the contents of this manual are correct.

However, neither the authors nor ABUS Security-Center accept any liability for loss

or damage caused or alleged to be caused directly or indirectly by this manual. The

contents of this manual are subject to change without notice.

2. Scope of delivery

xEyseo auto focus camera

xFixing plate for camera holder incl. screws

xInstallation instructions

3. Features

The Eyseo 35x Autofocus day/night camera has following features:

x35x optical zoom and 16x digital zoom (total 560x zoom)

xAutomatic day/night switching due to electromechanical IR cut filter (ICR)

xAuto-Iris-Function (AI), Backlight compensation (BLC), automatic gain control

(AGC), automatic white balance (AWB), flickerless function (FL) and autofocus-

function

xOSD menu

xZoom control and menu access through RS485 (Protocols Pelco D, Native, LG)

4. Precautions

To reduce the risk of electric shock and to ensure that your guarantee remains valid,

do not remove cover (or back).

Avoid rain and humidity. Do not use the camera in damp places. This camera is

designed for indoor use only. If the camera becomes wet, the power supply must be

switched off immediately. The camera should then be checked by a service

technician before being used again.

Clean the glass lens of the integrated motor zoom lens. For cleaning, use only

lint-free cloth or a cotton-tip moistened with ethanol (alcohol). Never use corrosive or

abrasive cleaning substances.

Never point the camera towards the sun. Whether the camera is in use or not,

never aim the lens at the sun or other very bright objects (laser light). This can

damage the CCD element and create white dots on the monitor, a sign that CCD

pixels are destroyed.

Operate the camera only within the specified temperature, humidity and power

ranges. Operating the camera outside the prescribed ranges can lead to reduced

product life and early malfunction. Greatly exceeding the specified operating ranges

can also result in immediate failure of the camera. All specifications can be found in

the technical data.

Handle the camera with care. When installing the camera, make sure it is not

subject to excessive physical stress (shocks, vibrations, etc.). It should be installed

in a place that is free from shocks and vibration. Incorrect handling and transport can

lead to damage to the camera.

5. Installation instructions

This camera is designed for indoor use only. If the camera is used outdoors, damage

may occur as a result of dampness and temperatures outside the prescribed range.

Outdoors the camera should be installed in appropriate protective housing so that it

is suitably protected against outside weather influences and remains in compliance

with the ambient operating conditions. This camera is equipped with an IR-cut and

can be used in combination with IR illumination.

First-class video pictures are largely dependent on the illumination used. When

using artificial light, make sure you use lights with a colour spectrum as near as

possible to daylight, since colour distortion can otherwise occur with colour cameras.

The reason for poor picture quality is often bad-quality cabling. Make sure the

connections are properly crimped, avoid passive video signal distributors, and

always choose the shortest possible cable route between the camera and video

processing devices.

6. Description of the rear side of the camera

(T) Zoom NEAR (TELE +/S)

Enlarges the detail view and reduces the image framing. In the menu this key

causes the cursor to move upwards.

(W) Zoom WIDE (WIDE -/T)

Enlarges the image framing to the maximum horizontal angle. In the menu this key

causes the cursor to move downwards.

(N) Focus Near / +

Press to focus in / increase value (+).

(F) Focus Far / -

Press to focus out / decrease value (–).

(MENU)

Press to access the programming menu. Press again to exit the programming menu.

(Power) (+12V / GND-)

12V DC voltage supply. Approved for DC voltage are class 2 power supply units

only. Ensure the polarity is correct.

Autres manuels pour Eyseo TV7057

Table des matières

Autres manuels Abus Caméra de sécurité

Abus

Abus Security-Center Ecoline TV7065 Manuel utilisateur

Abus

Abus TVCC51000 Manuel utilisateur

Abus

Abus TVAC19100B Manuel utilisateur

Abus

Abus HDCC78551 Manuel utilisateur

Abus

Abus HDCC68551 Manuel utilisateur

Abus

Abus HDCC62560 Manuel utilisateur

Abus

Abus TVIP52501 Manuel utilisateur

Abus

Abus tvip21551 Manuel utilisateur

Abus

Abus TVIP61550 Manuel utilisateur

Abus

Abus Security-Center Ecoline TV7018 Manuel utilisateur

Abus

Abus TVIP52500 Manuel utilisateur

Abus

Abus HDCC72510 Manuel utilisateur

Abus

Abus TVCC20000 Manuel utilisateur

Abus

Abus eyseo. TV7600 Manuel utilisateur

Abus

Abus TVIP10000 Manuel utilisateur

Abus

Abus Eyseo TVCC40000 Manuel utilisateur

Abus

Abus IPCB42500 Manuel utilisateur

Abus

Abus TVIP42562 Manuel utilisateur

Abus

Abus Security Center Eyseo TV7140 Manuel utilisateur

Abus

Abus HDCC62500 Manuel utilisateur

Abus

Abus IPCS84511 Manuel utilisateur

Abus

Abus Eyseo TV7110 Manuel utilisateur

Abus

Abus TVAC19000C Manuel utilisateur

Abus

Abus TVIP82561 Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur