Abit SI-2P+ Manuel utilisateur
SI-2P+
Dual Socket 604 Server Board
User’s Manual
4200-0333-02
Rev. 1.00
Copyright and Warranty Notice
The information in this document is subject to change without notice and does not
represent a commitment on part of the vendor, who assumes no liability or
responsibility for any errors that may appear in this manual.
No warranty or representation, either expressed or implied, is made with respect to the
quality, accuracy or fitness for any particular part of this document. In no event shall
the manufacturer be liable for direct, indirect, special, incidental or consequential
damages arising from any defect or error in this manual or product.
Product names appearing in this manual are for identification purpose only and
trademarks and product names or brand names appearing in this document are
property of their respective owners.
This document contains materials protected under International Copyright Laws. All
rights reserved. No part of this manual may be reproduced, transmitted or transcribed
without the expressed written permission of the manufacturer and authors of this
manual.
SI-2P+
Table Of Contents
Chapter 1. Introduction .................................................... 1-1
1.1. Features & Specifications....................................................... 1-1
1.2. Package Checklist (Standard Package) ..................................1-3
1.3. Layout Diagram...................................................................... 1-4
1.4. Jumpers & Connectors Description........................................ 1-5
Chapter 2. Hardware Setup.............................................. 2-1
2.1. Precautions ............................................................................. 2-1
2.2. Installing the Server Board..................................................... 2-2
2.3. Installing the CPU .................................................................. 2-3
2.3.1. Installing Retention Modules..............................................2-3
2.3.2. Installing CPU into Socket .................................................2-4
2.3.3. Installing Heatsink and Wind Tunnel.................................2-4
2.3.4. Installing Fan to Wind Tunnel Assemblies ........................2-5
2.4. System Memory ..................................................................... 2-6
2.4.1. Memory Configuration Table.............................................2-6
2.4.2. Installing and Removing Memory Modules.......................2-6
2.5. Connectors, Headers, and Switches ....................................... 2-8
2.5.1. EPS12V Power Connectors ................................................2-8
2.5.2. FAN Connectors .................................................................2-9
2.5.3. CMOS Memory Clearing Header.....................................2-10
2.5.4. Front Panel Switches & Indicators Headers .....................2-11
2.5.5. Floppy Disk Drive and IDE Connectors...........................2-12
2.5.6. PCI Expansion Slots .........................................................2-13
2.5.7. COM Port Header.............................................................2-14
2.5.8. Additional USB Ports Header...........................................2-15
2.5.9. LAN Active/Link Indicators Headers...............................2-16
2.5.10. Onboard VGA Output Switch ..........................................2-17
2.5.11. Smart Card Reader Connector..........................................2-18
2.5.12. Agilent Management Connector.......................................2-19
2.5.13. IPMB Connector...............................................................2-20
User’s Manual
2.5.14. Ultra 320 SCSI Channels Connectors ..............................2-21
2.5.15. Adaptec Zero Channel RAID (ZCR) SO-DIMM Interface
Riser..................................................................................2-23
2.5.16. External I/O Panel Connectors .........................................2-24
Chapter 3. BIOS Setup...................................................... 3-1
3.1. Main Menu ............................................................................. 3-2
3.2. Advanced Menu ..................................................................... 3-6
3.2.1. Advanced BIOS Features ...................................................3-6
3.2.2. Advanced Chipset Features ................................................3-8
3.2.3. Integrated Peripherals .......................................................3-10
3.2.4. Power Management Setup ................................................3-13
3.2.5. PnP/PCI Configurations ...................................................3-14
3.3. Security Menu ...................................................................... 3-16
3.4. PC Health Menu ................................................................... 3-17
3.5. Clk/Misc. Menu.................................................................... 3-18
3.6. Exit Menu ............................................................................. 3-19
Chapter 4. SCSI Utility ..................................................... 4-1
Chapter 5. Driver Installation .......................................... 5-1
5.1. Setup Items ............................................................................. 5-2
5.2. Installing Ultra320 SCSI Controller....................................... 5-3
5.2.1. Installing Windows 2000 with an Ultra320 SCSI Controller
............................................................................................5-3
5.2.2. Installing the Driver when Windows 2000 is Already
Installed ..............................................................................5-3
5.2.3. Changing SCSI Boot Controllers in Windows 2000 ..........5-4
Appendix A. Trouble Shooting ........................................... A-1
Appendix B. How to Get Technical Support ..................... B-1
SI-2P+
Introduction 1-1
Chapter 1. Introduction
1.1. Features & Specifications
Processor
• Supports dual Intel®Xeon 400MHz/533MHz Processors with 512K L2
Cache up to 2.0GHz ~ 2.8GHz and higher
Chipset
• Intel®E7501 Chipset Memory Controller Hub (MCH)
• 2x 82870P2 64-bit PCI/PCI-X Controller Hub 2 (P64H2)
• 82801CA I/O Controller Hub 3-S (ICH3-S)
Memory
• 6x 184-pin DIMM sockets support 144-bit wide (Dual Channel)
PC2100/PC1600 (DDR266/DDR200) memory
• Up to 12GB, ECC, Registered memory capacity (Chipkill technology
support)
LAN
• Intel®82546 dual ports Gigabit Ethernet controller
• RX and TX IP and TCP/UDP checksum off-loading capabilities
• Front panel LAN Active/Link LED
Graphics
• Onboard ATi RAGE XL PCI interface VGA
• 4MB local SDRAM memory support
PCI Extension Slot
• 4x PCI-X, support 64bit one 133MHz and three 100MHz slots
• 1x PCI 32bit/32MHz
Storage
• Dual Ultra 320 SCSI based on Adaptec 7902 ASIC with optional
Adaptec Zero Channel RAID (ZCR) SO-DIMM interface riser
• Dual ATA 100 IDE port support up to 4 IDE drives
• 1x Floppy Port
Multi I/O Functions
• 2x Serial Ports / 1x Parallel Port
User’s Manual
1-2 Chapter 1
• 1x PS/2 keyboard, 1x PS/2 mouse connector
• 2x USB external, 2x USB internal connectors
System BIOS
• AWARD Plug and Play BIOS supports APM, DMI, and ACPI
• Write-Protect Anti-Virus function, Wake on LAN by AWARD BIOS
• 4M-bit Flash ROM
Form factor
• EEB 3.0 Form Factor: 12in. x 13in. (305mm x 330mm)
• EPS12V PSU Connector
Miscellaneous
• Option for IPMI connector
Specifications and information contained herein are subject to change
without notice.
SI-2P+
Introduction 1-3
1.2. Package Checklist (Standard Package)
(1) SI-2P+ Server Board
(1) Brief Installation Guide
(1) Driver & Utilities CD
(1) 34-pin FDD Cable
(2) 40-pin IDE ATA66 Cable
(1) 68-pin LVD/SE SCSI cable with terminator for (2) Ultra 320 SCSI devices
(2) 603/604-pin Retention Module
(2) 603-pin Retention Module w/Clip
(2) 604-pin Retention Module w/Clip
(1) I/O Shield
User’s Manual
1-4 Chapter 1
1.3. Layout Diagram
SI-2P+
Introduction 1-5
1.4. Jumpers & Connectors Description
Jumpers Description Default Setting
CCMOS1 CMOS Clear Pins 1-2 (Normal)
VGA Onboard VGA Output Switch Pins 1-2 (Enable)
Connectors Description
AMC Agilent Management Connector
COM2 External COM2 Bracket Connector
DIMM 1~6 DDR DIMM Slots
FAN_1 CPU0 Fan
FAN_2 CPU1 Fan
FAN_3/4/5 System Fan
FDC1 Floppy Disk Drive Connector
IDE1/IDE2 Hard Disk Drives Connectors
J14 Adaptec Zero Channel RAID (ZCR) SO-DIMM interface
riser
J17 Ultra 320 SCSI Channel B Connector
J19 Ultra 320 SCSI Channel A Connector
J37A1 24-Pin EPS12V Power Connector
J37B1 8-Pin EPS12V Power Connector
J9 IPMB Connector
LAN_LED LAN Active/Link Indicators Headers
PCI1 PCI 32bit/33MHz
PCI2/4/5 PCI-X 64bit/100MHz
PCI3 PCI-X 64bit/133MHz
PN1 Front Panel Switch & Indicators Headers
SMART CARD Smart Card Reader Extension Cable Connector
USB_2 Additional USB Ports Connector
User’s Manual
1-6 Chapter 1
SI-2P+
Autres manuels pour SI-2P+
1
Table des matières
Autres manuels Abit Carte serveur
Manuels Carte serveur populaires d'autres marques
Intel
Intel S2600KP Manuel utilisateur
Supermicro
Supermicro SUPERSERVER 6026TT-TF Manuel utilisateur
Intel
Intel S2600CO series Manuel utilisateur
Advantech
Advantech ASMB-935 Series Manuel d'installation et d'exploitation
Advantech
Advantech ASMB-784 Manuel utilisateur
Intel
Intel SE7520BD2 Manuel utilisateur
