ABB REF630 Manuel utilisateur
Relion® 630 series
Feeder Protection and Control
REF630
Product Guide
Contents
1. Description...........................................................3
2. Application...........................................................3
3. Preconfigurations.................................................5
4. Protection functions.............................................8
5. Control................................................................12
6. Fault location......................................................12
7. Measurement.....................................................12
8. Disturbance recorder..........................................12
9. Event log.............................................................13
10. Disturbance report............................................13
11. Circuit-breaker monitoring................................13
12. Trip-circuit supervision......................................13
13. Self-supervision.................................................14
14. Fuse failure supervision.....................................14
15. Current circuit supervision................................14
16. Access control...................................................14
17. Inputs and outputs............................................14
18. Communication.................................................15
19. Technical data...................................................16
20. Front panel user interface.................................61
21. Mounting methods............................................61
22. Selection and ordering data..............................63
23. Accessories.......................................................67
24. Tools..................................................................68
25. Supported ABB solutions..................................69
26. Terminal diagram...............................................70
27. References........................................................73
28. Functions, codes and symbols.........................73
29. Document revision history.................................76
Disclaimer
The information in this document is subject to change without notice and should not be construed as a commitment by ABB Oy. ABB Oy assumes
no responsibility for any errors that may appear in this document.
© Copyright 2009 ABB Oy.
All rights reserved.
Trademarks
ABB and Relion are registered trademarks of ABB Group. All other brand or product names mentioned in this document may be trademarks or
registered trademarks of their respective holders.
Feeder Protection and Control 1MRS756380 A
REF630
Product version: 1.0 Issued: 15.09.2009
2 ABB
1. Description
REF630 is a comprehensive feeder
management IED for protection, control,
measuring and supervision of utility and
industrial distribution substations. REF630 is
a member of ABB’s Relion®product family
and a part of its 630 protection and control
product series characterized by functional
scalability and flexible configurability.
REF630 also features necessary control
functions constituting an ideal solution for
feeder bay control.
The 630 series IEDs support the new IEC
61850 substation automation standard
including horizontal GOOSE communication
and the DNP3 communication protocol
offering seamless connectivity to station
automation and SCADA systems.
2. Application
REF630 provides main protection for
overhead lines and cable feeders of
distribution networks. The IED fits both
isolated neutral networks and networks with
resistance or impedance earthed neutral. Four
pre-defined configurations to match typical
feeder protection and control requirements
are available. The pre-defined configurations
can be used as such or easily adapted or
extended with freely selectable add-on
functions, by means of which the IED can be
fine-tuned to exactly satisfy the specific
requirements of your present application.
Feeder Protection and Control 1MRS756380 A
REF630
Product version: 1.0 Issued: 15.09.2009
Revision: A
ABB 3
GUID-EBE462A5-7366-467A-BA18-583E75428EDB V1 EN
Figure 1. RET630 and REF630 IEDs applied for the incoming feeder and primary switchgear
in a double busbar arrangement. The RET630 with preconfiguration A is used for
protection and control of the power transformer, the REF630 with preconfiguration B
protects and controls the outgoing feeder and the REF630 with preconfiguration D is
used for the bus sectionalizer.
Feeder Protection and Control 1MRS756380 A
REF630
Product version: 1.0 Issued: 15.09.2009
4 ABB
3. Preconfigurations
The 630 series IEDs are offered with optional
factory-made application preconfigurations.
The preconfigurations contribute to faster
commissioning and less engineering of the
IED. The preconfigurations include default
functionality typically needed for a specific
application. Each preconfiguration is
adaptable using the Protection and Control
IED Manager PCM600. By adapting the
preconfiguration the IED can be configured
to suit the particular application.
The adaptation of the preconfiguration may
include adding or removing of protection,
control and other functions according to the
specific application, changing of the default
parameter settings, configuration of the
default alarms and event recorder settings
including the texts shown in the HMI,
configuration of the LEDs and function
buttons, and adaptation of the default single-
line diagram.
In addition, the adaptation of the
preconfiguration always includes
communication engineering to configure the
communication according to the functionality
of the IED. The communication engineering
is done using the communication
configuration function of PCM600.
If none of the offered preconfigurations fulfill
the needs of the intended area of application
the 630 series IEDs can also be ordered
without any preconfiguration. This option
enables full flexibility to configure the IED
from the ground up.
Table 1. REF630 preconfigurations
Description Preconfiguration
Preconfiguration A for open/closed ring feeder A
Preconfiguration B for radial overhead/mixed line feeder B
Preconfiguration C for ring/meshed feeder C
Preconfiguration D for bus sectionalizer D
Number of instances available N
Feeder Protection and Control 1MRS756380 A
REF630
Product version: 1.0 Issued: 15.09.2009
ABB 5
Table 2. Supported functions
Functionality A B C D N
Protection
Three-phase non-directional overcurrent, low stage 1 1 1 1 1
Three-phase non-directional overcurrent, high stage 2 2 2 2 2
Three-phase non-directional overcurrent, instantaneous stage 1 1 1 1 1
Three-phase directional overcurrent, low stage 2 - - - 2
Three-phase directional overcurrent, high stage 1 - - - 1
Non-directional earth fault, low stage - 1 - 1 1
Non-directional earth fault, high stage 1 1 1 1 1
Non-directional earth fault, instantaneous stage - 1 - 1 1
Directional earth fault, low stage 2 1 3 - 3
Directional earth fault, high stage 1 - 1 - 1
Transient/intermittent earth fault 1 - - - 1
Negative-sequence overcurrent 2 2 2 2 2
Three-phase thermal overload for feeder 1 1 1 - 1
Phase discontinuity 1 1 1 - 1
Three-phase current inrush detection 1 1 1 1 1
Three-phase overvoltage - - 3 - 3
Three-phase undervoltage - - 3 - 3
Positive-sequence overvoltage1) - - - - 2
Positive-sequence undervoltage1) - - - - 2
Negative-sequence overvoltage 1) - - - - 2
Residual overvoltage - - 3 - 3
Frequency gradient - - - - 5
Overfrequency - - - - 5
Underfrequency - - - - 5
Load shedding - - - - 6
Fault locator1) - - - - 1
Circuit-breaker failure 1 1 1 1 2
Autoreclosing 1 1 1 - 2
Tripping logic 1 1 1 1 2
Feeder Protection and Control 1MRS756380 A
REF630
Product version: 1.0 Issued: 15.09.2009
6 ABB
Table 2. Supported functions, continued
Functionality A B C D N
Distance protection1) - - 1 - 1
Automatic switch-onto-fault logic - - 1 - 2
Protection related functions
Local accelerat. logic - - 1 - 1
Communication logic for residual OC - - 1 - 1
Scheme communic. logic - - 1 - 1
Current reversal and WEI logic - - 1 - 1
Current reversal and WEI logic for residual OC - - 1 - 1
Control
Bay control 1 1 1 1 1
Interlocking interface 4 4 4 1 10
Circuit-breaker/disconnector control 4 4 4 1 10
Circuit breaker 1 1 1 1 2
Disconnector 3 3 3 - 8
Local/remote switch interface - - - - 1
Synchrocheck1) - - - - 1
Supervision and monitoring
Circuit-breaker condition monitoring 1 1 1 1 2
Fuse failure supervision 1 1 1 - 2
Current-circuit supervision 1 1 1 - 2
Trip-circuit supervision 3 3 3 3 3
Station battery supervision - - - - 1
Energy monitoring - - - - 1
Generic measured values - - - - 3
Measured value limit supervision - - - - 9
Measurement
Three-phase current 1 1 1 1 1
Three-phase voltage, phase-to-earth 1 1 1 1 1
Three-phase voltage, phase-to-phase - - - - 1
Residual current 1 1 1 1 1
Feeder Protection and Control 1MRS756380 A
REF630
Product version: 1.0 Issued: 15.09.2009
ABB 7
Table 2. Supported functions, continued
Functionality A B C D N
Residual voltage 1 1 1 - 1
Power monitoring with P, Q, S, power factor, frequency 1 1 1 1 1
Sequence current 1 1 1 1 1
Sequence voltage 1 1 1 1 1
Metering
Pulse counter for energy metering - - - - 4
Disturbance recorder function
Analog channels 1-10 (samples) 1 1 1 1 1
Analog channel 11-20 (samples) - - - - 1
Analog channel 21-30 (samples) - - - - 1
Analog channel 31-40 (calc val) - - - - 1
Binary channels 1-16 1 1 1 1 1
Binary channels 17-32 1 1 1 1 1
Binary channels 33-48 1 1 1 1 1
Binary channels 49-64 1 - 1 - 1
1) Optional functions, to be specified at ordering
4. Protection functions
The IED offers selective short-circuit and
overcurrent protection including three-phase
non-directional overcurrent protection with
four independent stages, and three-phase
directional overcurrent protection with three
independent stages. In addition, the IED
includes three-phase current inrush detection
for blocking selected overcurrent protection
stages or temporarily increasing the setting
values. The included thermal overload
protection function uses thermal models of
overhead lines and cables. The negative-
sequence overcurrent protection, with two
independent stages, is used for phase-
unbalance protection. In addition, the IED
offers phase discontinuity protection.
Further, the IED features selective earth-fault
and cross country fault protection for isolated
neutral, and for resistance and/or impedance
earthed neutral systems including solidly
earthed neutral systems. The earth-fault
protection includes non-directional earth-fault
protection with three independent stages and
directional earth-fault protection with four
independent stages.
The included transient/intermittent earth-fault
protection is based on detection of earth-fault
transients related to continuous or
intermittent faults. Intermittent earth-fault is
special type of earth-fault encountered in
compensated networks with underground
cables. In solidly earthed or compensated
networks the transient earth-fault protection
function detects earth-faults with low fault
resistance. The residual overvoltage
Feeder Protection and Control 1MRS756380 A
REF630
Product version: 1.0 Issued: 15.09.2009
8 ABB
protection, with three independent stages, is
used for earth-fault protection of the
substation bus and the incoming feeder, and
for back-up protection of the outgoing feeders.
The IED offers distance protection including
both circular (mho) and quadrilateral (quad)
zone characteristics, three independent zones
with separate reach settings for phase-to-
phase and phase-to-earth measuring elements
and two zones for controlling auto-reclosing
of circuit breakers. Further, the IED offers
automatic switch onto fault logic with voltage
and current based detection options.
The IED offers voltage protection functions
including three-phase undervoltage and
overvoltage protection with three
independent stages each, both with phase-to-
phase or phase-to-earth measurement. The
IED offers overfrequency, underfrequency
and rate-of-change of frequency protection to
be used in load shedding and network
restoration applications.
In addition the IED offers three-pole multi-
shot autoreclose functions for overhead line
feeders.
The IED incorporates breaker failure
protection for circuit breaker re-tripping or
back-up tripping for the upstream breaker.
GUID-8D94ABFF-3F94-4C26-BDF5-2F4DD4B906FB V1 EN
Figure 2. Protection function overview of preconfiguration A
Feeder Protection and Control 1MRS756380 A
REF630
Product version: 1.0 Issued: 15.09.2009
ABB 9
GUID-4460293F-E493-4876-8B35-EA12DD21B7BD V1 EN
Figure 3. Protection function overview of preconfiguration B
Feeder Protection and Control 1MRS756380 A
REF630
Product version: 1.0 Issued: 15.09.2009
10 ABB
Table des matières
Autres manuels ABB Dispositif de protection
ABB
ABB RELION RET670 Instructions d'utilisation
ABB
ABB Relion 615 series Manuel utilisateur
ABB
ABB REG650 ANSI Manuel utilisateur
ABB
ABB Relion 615 series Instructions d'utilisation
ABB
ABB AutoLink Manuel utilisateur
ABB
ABB Relion REB500 Manuel utilisateur
ABB
ABB REG316 4 Series Manuel utilisateur
ABB
ABB REG670 2.0 IEC Guide de démarrage rapide
ABB
ABB PCM600 Manuel utilisateur
ABB
ABB Relion REG650 Guide de démarrage rapide
ABB
ABB RELION REX640 Manuel utilisateur
ABB
ABB VE5-1 Manuel utilisateur
ABB
ABB REA 105 Manuel utilisateur
ABB
ABB Relion REQ650 Instructions d'utilisation
ABB
ABB Relion 650 series RET650 Manuel utilisateur
ABB
ABB Relion 670 series Instructions d'utilisation
ABB
ABB Relion 615 series Manuel utilisateur
ABB
ABB RED670 Relion 670 series Manuel utilisateur
ABB
ABB Relion 670 series Manuel utilisateur
ABB
ABB RELION REL670 Mode d’emploi
Manuels Dispositif de protection populaires d'autres marques
nxt
nxt BIA-nXt-DPC 1-22 Manuel utilisateur
TFortis
TFortis SG-Switch Manuel utilisateur
BERNINI DESIGN
BERNINI DESIGN Be172 Manuel utilisateur
Rayleigh Instruments
Rayleigh Instruments RI-ENERGYSET-3P-ESS-50-100 Manuel utilisateur
GE
GE Multilin 3 Series Manuel utilisateur
E.K.T.
E.K.T. ke-DP01 Manuel utilisateur
