Safety Instructions
Always ensure the equipment is operated by trained staff.
Always ensure the mains electricity is switched on.
Always keep users hands away from moving parts.
Always ensure that the bather’s hands and feet are kept away from the cut outs in the platform.
Always check the position of the bather on the platform before raising/lowering the bath.
Always have the equipment serviced regularly (see Service Level Agreement).
Always ensure the shower head is returned to its holder when not in use.
Never use the bath for any purpose other than that for which it has been designed.
Never leave the bath with the platform in a raised position.
Never allow other equipment such as hoists to contact the bath forcibly as this may cause damage.
Never allow items such as the shower head to remain beneath the platform when raising the bath.
Regularly clean the bath using non-abrasive cleaners.
Always fit the headrest
In instances where access is required to the underside of the bath platform, always remove platform
accessories (i.e. headrest, footrest) prior to manually lifting bath platform.
Where access to the underside of the platform is required, always ensure the platform is in its highest
position prior to manually lifting the platform.
When filling the bath, only fill to the halfway point prior to introducing the bather. Once the bather is
comfortably seated top up the bath if required.
Maintenance
After each use: Dissolve a sterilising tablet into the bath water and then run the system prior to
sending the water to waste
.
Clean the bath and fittings using a soft cloth and non abrasive cleaner with anti-bacterial agent.
Monthly: Test RCDs.
Annually: Servicing by an approved company in accordance with the manufacturer’s instructions.
Gemini 2000 User Manual v1.3 4
