A2b MyM 3T Manuel utilisateur

User manual MyM DVB-3T , rev D eng Page 1

English

MyM 3T

User Manual

•NICAM or A2 stereo

•12-volt power supply

•Low power consumption

•Compact unit with 2 DVB-T tuners

•MPEG-2 and MPEG-4 compliant

•3 analogue modulators

•Two CI for decryption or multidecryption

User manual MyM DVB-3T , rev D eng Page 2

1Contents

1 Contents ...................................................................................................... 2

2 Unpacking Your MyM......................................................................................... 2

3 Introduction .................................................................................................. 3

4 Information about digital terrestrial television ......................................................... 3

5 Installation Part one ........................................................................................ 4

6 Connectors and buttons .................................................................................... 4

7 Installation Part two ........................................................................................ 5

7.1 Connection to one TV ....................................................................................... 5

7.2 Connection to a Cable network ............................................................................ 5

7.3 Automatic installation and channel search .............................................................. 6

7.4 TV channel search ........................................................................................... 6

8 Menu settings................................................................................................. 7

8.1 Basic settings ................................................................................................. 7

8.1.1. Information ................................................................................................. 7

8.1.2 Choosing channels (Channel 1, 2,3) ..................................................................... 7

8.1.3 Channel search ............................................................................................. 7

8.1.4 National...................................................................................................... 8

8.1.5 National – Subtitling ....................................................................................... 8

8.1.6 National – Audio language................................................................................. 9

8.1.7 National – Menu language ................................................................................. 9

8.2 Advanced settings ........................................................................................... 9

8.2.1 Aspect ratio (Picture format)............................................................................10

8.2.2 Output channels ...........................................................................................10

8.2.3 Quality ......................................................................................................10

8.2.5 Channel indicator .........................................................................................11

8.2.6 Output audio type.........................................................................................11

8.2.6.1 TV System for audio ....................................................................................12

8.2.7 Loopthrough................................................................................................12

8.2.8 CI 1 and CI 2 ...............................................................................................12

9 Multiple installation and Factory reset ................................................................13

9.1 Installation of multiple MyM’s............................................................................13

9.2 Connecting a Set-Top-Box with the MyM ...............................................................13

10 Support and trouble-shooting.............................................................................14

10.1 Trouble-shooting ...........................................................................................14

11 Technical specification ....................................................................................15

12 Declaration of Conformity.................................................................................16

2 Unpacking Your MyM

When unpacking the carton following items should be included.

1. MyM

2. Power adaptor

3. User Manual

User manual MyM DVB-3T , rev D eng Page 3

3 Introduction

Thank you for purchasing the MyM Micro Master, a quality product developed and

manufactured by A2B Electronics.

The MyM is a unique solution that allows you to watch digital television on all your

TV sets. The MyM receives all terrestrial digital programs, and re-transmits 3

programs simultaneously to all your TV’s.

This User Manual describes how to install and connect your MyM quickly and easily .

In the unlikely event that you experience any difficulties please refer to Chapter

10, Support and Trouble Shooting.

4 Information about digital terrestrial television

Today there are digital terrestrial channels available, both free to air and

encrypted channels.

The terrestrial digital channels are transmitted in muxes. A mux (or multiplex) is a

package of channels that are transmitted on the same frequency. Each mux

normally contains between 4 and 7 channels. Frequently a mux will contain both

free to air and pay TV channels.

The MyM receives transmissions from 2 muxes, and re-transmits 3 of the digital

channels in analogue with Nicam or A2 stereo to all connected receivers (TV’s,

VCR’s etc.) in the cable TV network. There is also a loop through of the digital

muxes, which makes it possible to connect a Set Top Box (STB) after the MyM.

Kommentar [ DS1] : need to

consider whether to have a

generic support site in English

with links to each country site

– or delete the reference to

the multibox.se

User manual MyM DVB-3T , rev D eng Page 4

5Installation Part one

The MyM should be mounted correctly to ensure excellent performance over a long

period of time.

Please note that it is important to mount the MyM vertically for correct airflow.

Attach the MyM to a suitable surface using the holes on the back side. There is also

a wall mount plate that can be used together with a padlock for protection of the

CA modules.

Install the MyM for easiest connection of the cables. If the MyM is installed in the

attic, mount it close to the aerial. Also, make sure you have a 230V AC power

outlet. For more information about how to install the MyM please refer to Chapter

7 Installation.

6Connectors and buttons

Connectors and buttons

1. Aerial in

2. Antenna loop through

3. TV out

4. DC-power (12 V)

5. RJ-45 for updates 1)

6. LCD operation indicator

7. Arrow up for menu navigation

8. Arrow down for menu navigation

9. OK button for showing menus and

for menu choice

1) See www.a2b.se f or inf ormat ion about new sof t war e.

6 7

Kommentar [ DS2] : need to

consider whether to have a

generic support site in English

with links to each country site

– or delete the reference to

the multibox.se

User manual MyM DVB-3T , rev D eng Page 5

7Installation Part two

7.1 Connect ion t o one T V

If you only want to connect one TV, or one TV combined with a VCR / PVR, the

most straight-forward installation is to mount the MyM on the wall close to the TV.

1. Connect the aerial cable to the aerial

input on the MyM

2Connect the one end of a RF cable to

the RF output on the MyM, and connect

the other end to the aerial in socket on

your TV.

3Connect the power adaptor (only use

the adaptor delivered with the MyM).

4The MyM will now start an automatic

channel search. When the channel

search is finished the LED on the MyM

will turn red or green ( depending on if

the selected services are encoded or

not). You now have to do a channel search on your TV to get the 3 channels

from the MyM. See Chapter 7.3 Automatic installation and channel search,

for more information.

Not e! Do not use any ot her t he power adapt or t han t he or iginal one wit h t he MyM.

7. 2 Connect ion t o a Cable net work

The MyM should be connected close to the aerial, before the signals are split to the

cable network.

If there is an amplifier connected to the

splitter you should first try to install

the MyM without the amplifier, because

the MyM has an embedded amplifier.

If there are long cables in the cable

network, an amplifier can be needed

and should then be connected after the

MyM.

Splitter

MyM

TV TV

User manual MyM DVB-3T , rev D eng Page 6

7. 3 Aut omat ic inst allat ion and channel search

The MyM will automatically start a channel search when it is connected to a TV

aerial and the power adaptor is connected. The MyM will search for the strongest

transmissions, and after that it will start transmitting three channels according to

the table below:

Channel Frequency

S11 231,25 MHz

S13 245,25 MHz

S15 259,25 MHz

The channel search takes about 60 seconds. When the channel search is complete,

the LED on the MyM will turn to red or green depending on if found channels are

FTA or encrypted services.

NOT E! In normal operat ion t he LED f lashes green.

7. 4 TV channel search

Once the channel search on the MyM is complete you will

need to do a channel search on all TV’s and VCR’s in the

cable network. Many TV sets have an automatic channel

search facility - for more information please refer to the

TV and VCR User Manuals. Channels coming from the MyM

will be highlighted by a text box with “MyM 1”, “MyM 2”

and “MyM 3” in the upper right corner. This text box will

disappear automatically after 8 hours. You can also

remove the text box manually via the menu system of the

MyM, see Chapter 8 Menu settings, for more information.

If you need help to install your MyM, please contact your local dealer/installer. You

can also visit our web site for more information: www.a2b.se

LED

User manual MyM DVB-3T , rev D eng Page 7

8Menu settings

The MyM has a menu system for changing

settings and functionality. The menus are shown

on the TV screen. Press the OK button on the MyM

(see Chapter 6 Connectors and buttons) to display

the menus. The picture to the right shows the

main menu. Use the arrow up and arrow down

buttons on the MyM to navigate the menus. Exit

the menu by moving the indicator to “Return” and

then press the OK button on the MyM.

8. 1 Basic set t ings

In the basic settings you can find information about your MyM, choose what

programs are transmitted by the MyM and/or start a new channel search.

8.1.1. Information

The information box displays the hardware

version and the software version of your MyM.

It also displays the serial number of your

MyM.

8. 1. 2 Choosing channels (Channel 1, 2,3)

This menu is used for selecting which digital

television channels are transmitted by the MyM on

Channels 1, 2 and 3.

Move the indicator (using the arrow buttons

on the MyM) to the Channel you want to

change.

NOTE! There could be more channels t han

you can see in t he window. Scroll up or

down t o see all channels

Press the OK button on the MyM to show all

the digital television channels.

Select the digital television channel and

press the OK button again.

8. 1. 3 Channel search

The first time the MyM is installed it will do an

automatic channel search to tune in all available

digital channels. This menu can be used for

User manual MyM DVB-3T , rev D eng Page 8

starting a new channel search, for example if you take the MyM to a new location.

Connect the TV aerial before starting the channel search. To follow the channel

search process tune a TV to channel S11 (231,25 MHz). During the channel search

all the signals that come from the aerial are shown at the bottom of the screen by

individual channels (frequencies) and signal strength. The digital muxes have green

indicators. Other signals have blue indicators. Please refer to Chapter 8.2 Advanced

Installation, for more information about signal quality and how to how to adjust

the TV aerial.

All the channels that are received and identified are

displayed in the background.

8.1.4 National

This menu is used to change the country settings. You can

choose your preferences for Subtitling, Audio language,

and Menu language.

8. 1. 5 Nat ional – Subt it ling

Use this menu to set your preferences for subtitling. It is

possible to set the type of subtitling, choose the subtitle

language and select between DVB or teletext subtitling,

select Auto Conversion and set the teletext character set.

This menu can also be used to switch subtitling off (None).

8. 1.5. 1 Type

Use this menu to choose between normal subtitling or

special subtitling for the hearing impaired. This offers

enlarged subtitles and colour coded text. Alternatively all

the subtitling can be switched off. The MyM is preset to

“Normal”.

8. 1.5. 2 Language

In this menu you select what language that should be used

for subtitling.

NOTE! There are more choices t han you can see in t he

window. Scroll up or down t o see all choices.

Kommentar [ DS3] : Is this

correct if the Auto Mux search

option is switched on?

User manual MyM DVB-3T , rev D eng Page 9

8. 1. 5. 3 Pr iorit y

Subtitling can be transmitted in different formats; via

“Teletext subtitling” or “DVB subtitling”. The format is

automatically selected by the MyM. Sometimes both

formats are transmitted and the MyM then automatically

chooses the format according to the priority set here.

8. 1. 5. 4 Aut o conversion

If Aspect ratio is 16:9 and some of the subtitling is out of

the image area you can get all text within the image area

by select “On” for Auto conversion.

8. 1. 6 Nat ional – Audio language

This menu is used to set your preference for audio

language, when a TV program is broadcast in more than

one language.

8. 1. 7 Nat ional – Menu language

This menu is used to set your preference for the language

used in all menus in the MyM.

8.2 Advanced set t ings

In the advanced settings menu you will find settings for

Aspect ratio, Output channels, Quality, Channel indicator,

Output audio type, Loopthrough, CI1 and CI2.

User manual MyM DVB-3T , rev D eng Page 10

8. 2. 1 Aspect rat io (Pict ure f ormat )

The picture format can be set to 4:3 or 16:9 (Widescreen).

If the main TV is 4:3 choose 4:3 to watch 4:3 programs in

full screen and widescreen programmes (16:9) in the

letterbox format where the full width of the picture is

shown and the top and bottom of the picture are black.

Choose 16:9 if the main TV is widescreen to watch 16:9

programmes in full screen.

8.2.2 Output channels

Use this menu to choose the output frequencies for the

MyM. After automatic installation you will find the preset

channels on VHF output at channels S11, S13 and S15

respectively. This menu allows you to choose between VHF

(S10 to S41) or UHF (E21 to E69) as output channels.

8.2.3 Qualit y

This menu is used to test the signal quality and the aerial

reception quality. It may be necessary to adjust or upgrade

the TV aerial to ensure good picture and sound on all

channels. For more information see Chapter 8.2.3.1

Reception.

The MyM has an inbuilt spectrum analyser to help optimise

the aerial installation. For more information see Chapter

8.2.3.2 Antenna Quality.

8. 2.3. 1 Reception

Use this menu to measure the reception quality of each

channel. If these are not optimal it is possible that the

picture and sound quality will deteriorate in poor reception

conditions and it may be necessary to adjust the aerial.

The information refers to the 2 installed muxes for the 3

channels.

Table des matières

Autres manuels a2b Récepteur TV

a2b

a2b MyM-3T mictro master Manuel utilisateur

Manuels Récepteur TV populaires d'autres marques

NEC

NEC PX-TUAN-01 Manuel utilisateur

Edision

Edision Piccollino Manuel utilisateur

Matsui

Matsui DTR1 Manuel utilisateur

Dyon

Dyon Raptor Manuel utilisateur

Strong

Strong SRT 2401 Mode d'emploi

TerraTec

TerraTec CINERGY DT USB XS DIVERSITY Manuel d'instructions

Haier

Haier 34F9K Manuel utilisateur

TechniSat

TechniSat DigiCom 1 Manuel utilisateur

Haier

Haier LT19A1 Manuel utilisateur

Triax

Triax CR 317 Manuel utilisateur

DirecTV

DirecTV D10-300 Manuel utilisateur

Motorola

Motorola VIP2502W Manuel utilisateur

ActionTec

ActionTec WirelessTV Manuel utilisateur

Motorola

Motorola VIP1200 Series Manuel utilisateur

Xoro

Xoro HRT 1300 Manuel utilisateur

Motorola

Motorola DH6200 Manuel utilisateur

Manhattan

Manhattan Plaza DS-100 Manuel utilisateur

Micro Prose

Micro Prose MPI-500 Manuel utilisateur

a2b MyM 3T Manuel utilisateur

Manuels Récepteur TV populaires d'autres marques