3TO COMBIped Guide de configuration

SET OF INSTRUCTIONS - COMBIped



TABLE OF CONTENT

INTRODUCTION 4

COMBIPED BRACE AND ACCESSORIES 5

INSTALLING THE COMBIPED BRACE 6

1. Prep r tions 6

2. Adjusting the br ce 7

3. Cle ning n il nd br ce 10

4. Adhering the COMBIped br ce 11

5. Cutting off the locking pin nd smoothing 13

REMOVING THE COMBIPED BRACE 14

PRODUCT INFORMATION 15

SAFETY INSTRUCTIONS 15

INTRODUCTION

Scope of applications

Our COMBIped

br ce c n be used s remedy g inst deformed,

ingrown nd rolled-

in n ils th t c use p in. The br ce will help to use

wire br ce, even if one side of the n il edge is ccessible only.

Depending on the type of pplic tion, the br ce c n be fixed to pply

tension on either both sides of the n il or one side only.

> If you need to pply tension on both sides

the br ce should be s long s possible nd

should stretch ccross the entire width of the

n il. You m y lso set two COMBIped

br ces

one

fter the other ( lso with different wire

sizes).

> If the effect is required on one side

only,

the br ce will be m de shorter nd the

dhesive p d ffixed in the middle. The effect

will then be focused on the wire side.

> In order to cure he vily rolled-

in n il, the

COMBIped

br ce should be inserted s f r to

the re r s possible.

> In n cute p in scen rio, ple se pl ce the

COMBIped br ce pprox. 2 mm

behind the

p in re .

COMBIped



BRACE AND ACCESSORIES

Your st rter set comes with ll the products nd instruments you

need in order to use the COMBIped br ce:

1 COMBIped br ces in three different sizes

2 Adhesive with brush

3 Alcohol sw b for cle ning n il nd br ce

4 3TO combin tion pliers

5 COMBIped fix tion pliers

6 Side-cutting nippers

7 S ndp per file

INSTALLING T E COMBIped



BRACE

> The brace thickness “hard“ should be used for very thick and

rigid nails only, therefore, please use “soft“ and “medium“ for

most of the applications!

CAUTION: There is d nger of the n il

to come off when using br ce

with too much tension. Th t is why moder te tension should be pplied

only. If the p tient feels too much tension, remove the br ce nd repl ce

it by the next lower tension level.

1. Preparations

Preparing the nails and cleaning the nail fold

Remove ny non-

dhesive p rts from the n il

surf ce. Smoothen extremely rough n ils or slightly

roughen extremely smooth n ils.

Cle n the n il fold nd prep re the re such s to

en ble the hook to be fixed under the n il edge

before inst lling the COMBIped br ces.

Disinfecting the brace

Disinfect the wire of the COMBIped

br ce before

bending the hook nd lso e

ch time before you

inst ll it by wiping with the lcohol sw b.

Selecting the right brace

Ple se choose the right br ce size depending on the

n il thickness (force needed).

soft:

Wire thickness of 0.25 mm – for soft nd norm l

n ils

medium:

Wire thickness of 0.30 mm – for norm l nd thick

n ils

hard:

Wire thickness of 0.35 mm – for extremely rigid nd

thick n ils

Bending the hooks

Use the combin tion pliers nd bend rough hook t the defined spot.

> Alw ys bend round the round m ndrel of the combin tion pliers!

2. Adjusting the brace

Grab the brace

Fix the br ce on both pins using the COMBIped

fix tion pliers (see photo)

> A cle r nce between the p d nd the COMBIped

fix tion plie rs will keep the br ce flexible.

Defining the brace length

Define the br ce length ccording to the n il width.

The br ce should be s long s possible.

Use one of the four bores

depending on the desired

hook size. The bores –

i.e.

the hooks –

will become

sm ller tow rds the pe k of

the pliers.

Pl ce the pre-

bent hook in

the bore of the combin tion

pliers in n upright position

nd then press the pliers

together completely.

> The hook should not

protrude on the other side

of the pliers.

Cut off the hook short with

the side-

cutting nippers.

The fl t side of the nippers

will show tow rds the

rem ining hook!

> Ple se protect both your

eyes nd those of your

p tients by we ring

protective spect cles!

Deburr the hook using

n il

file. While doing so, support

the wire with your finger.

wrong right

For inst llin

g the br ce,

ple se st rt by inserting

the hook into the n il fold,

turn the hook under the

n il edge nd then press

the p d with the fix tion

pliers onto the n il.

Slightly pull the pliers to

void the hook to jump off.

> If the tension is too

strong,

the wire m y be

pulled out of the p d

thereby destroying the

br ce

Check brace tension and optimse

Do not bend the wire of the COMBIped br ce, le ve it str ight first.

Ple se gree the level of tension with your p tient.

> Your p tient should not feel ny unple s nt tension!

RIG T ANGLE

Only this w y c n the

hook be turned under

the n il fold properly

WRONG ANGLE

The hook c nnot be

turned under the n il edge

nd will c use injury of

the n il fold

Cleaning the nail and brace

Cleaning the nail

Cle n the n il with the lcohol sw b.

Cleaning the brace

Cle n the dhesive surf ce of the br ce p d with

the lcohol sw b.

> Allow n il nd br ce to dry off well fter

cle ning to ensure th t the dhesive will hold.

It is recommended to always use a lower brace tension,

rather than bending the brace.

Ple se pre-

bend the br ce

with your fingers or using

the 3TO combin tion pliers

ccording to the n il

sh pe,

only if your p tient feels too

much tension.

Table des matières

Autres manuels 3TO Produit de soins personnels

3TO

3TO podofix Manuel utilisateur

Manuels Produit de soins personnels populaires d'autres marques

Pretika

Pretika ST102 Mode d’emploi

Beurer

Beurer FC 76 Manuel utilisateur

Pebble Grey

Pebble Grey 500.40.70-75 Manuel utilisateur

PUSH

PUSH ortho Manuel utilisateur

Dermlite

Dermlite DL3N Manuel utilisateur

DERMAPEN

DERMAPEN SEMI Manuel utilisateur

HiB

HiB Spectre 50 Manuel utilisateur

Carex

Carex SunLite Manuel utilisateur

Roper Rhodes

Roper Rhodes Intense Manuel de la liste des pièces

Interacoustics

Interacoustics Titan IMP440 Instructions d'utilisation et de sécurité

ReTrak

ReTrak VS001 Manuel utilisateur

LED Technologies

LED Technologies dpl PAIN RELIEF Joint Wrap Manuel utilisateur

Casa Lusso

Casa Lusso MVL1000x450PR Manuel utilisateur

Quoizel

Quoizel QR3326 Instructions de montage

Beurer

Beurer EM 37 Manuel utilisateur

BERTSCHAT

BERTSCHAT HEATED HOODIE PRO - DUAL HEATING Manuel utilisateur

ACP

ACP OMNISTAND Manuel utilisateur

Scarlett

Scarlett VitaSpa SC-CA304PS11 Manuel utilisateur