3One data 1100 Series Manuel utilisateur

MODEL1100 Series

Media Converter

Quick Installation Guide

3onedata Co., Ltd.

Address:

3/B, Zone 1, Baiwangxin High Technology

Industrial Park, Xili, Nanshan District,

Shenzhen

Website:

www.3onedata.com

Tel:

+86 0755-26702688

Fax:

+86 0755-26703485

【Package Checklist】

Please check whether the package and accessories are intact

while using the media converter for the first time.

Media Converter (equipped with

terminal blocks)

Certification

Quick installation guide

Warranty card

If any of these items are damaged or lost, please contact our

company or dealers, we will solve it ASAP.

【Product Overview】

This series of products are media converters. Its models are

as follows:

Model I MODEL1100-5VDC (1 100M Copper Port + 1 100M

Fiber Port + 1 External 5VDC Power Supply)

Model II MODEL1100-220VAC (1 100M Copper Port + 1

100M Fiber Port + 1 Built-in 220VAC Power Supply)

Model III MODEL1100-48VDC (1 100M Copper Port + 1

100M Fiber Port + 1 Built-in 48VDC Power Supply)

【Panel Design】

Front view

Model I

Model II, Model III

Top view

Model I

Model II, Model III

Bottom view

Model I

Model II

Model III

Side view

Model I

Model II, Model III

1. Copper port rate status indicator

2. Fiber port rate status indicator

3. Copper port connection status indicator

4. Fiber port connection status indicator

5. Power supply indicator

6. Copper port working mode indicator

7. Hanger

8. 100M fiber port

9. 100M copper port

10. External DC round head power supply input

terminal

11. AC outlet

12. AC outlet switch

13. Built-in 48VDC power supply input terminal

【Mounting Dimension】

Unit: mm

Model I

Model II, Model III

Notice before mounting:

Don't place or install the device in area near water or

moist, keep the relative humidity of the device

surrounding between 5%~95% without condensation.

Before power on, first confirm the supported power

supply specification to avoid over-voltage damaging the

device.

The device surface temperature is high after running;

please don't directly contact to avoid scalding.

【Wall-mounting the Device】

Step 1 Put the device on the wall it will be mounted as

reference or to refer to its mounting dimension, and

mark the locations of 2 expansion screws.

Step 2 Put the device on the marked wall and tighten the

screws toward the marked locations, mounting

ends.

【Disassembling the Device】

Step 1 Device powers off

Step 2 Hold the device steady and unscrew the nuts on

the wall.

Step 3 Take out the device, disassembling ends.

Notice before powering on：

Power ON operation: first connect power line to the

connection terminal of device power supply, then power

on.

Power OFF operation: first unpin the power plug, then

remove the power line, please note the operation order

above.

【Power Supply Connection】

External 5VDC power supply

Model I provides external 5VDC power supply, DC

round head.

Built-in 220VAC power supply

Model II provides built-in 220VAC power supply,

and AC outlet with switch.

Power supply range: 85~265VAC.

Built-in 48VDC power supply

Model III provides 3-pin 5.08mm pitch

terminal blocks and built-in 48VDC power

supply.

【Checking LED Indicator】

The device provides LED indicators to monitor its operating

status, which has simplified the overall troubleshooting

process. The function of each LED is described in the table as

below:

LED

Status

Description

PWR

PWR is connected and running

normally

OFF

PWR is disconnected and running

abnormally

Link/Act

（TX）

Copper port has established valid

connection

Blinking

Copper port is in an active

network status

OFF

Copper port hasn’t established

valid connection

Link/Act

(FX)

Fiber port has established valid

connection

Blinking

Fiber port is in an active network

status

OFF

Fiber port hasn’t established valid

connection

100(TX)

Copper port rate is 100Mbps

OFF

Copper port rate is 10Mbps or it is

not connected

100(FX)

Fiber port rate is 100Mbps

OFF

Fiber port is not connected

FDX

Copper port is in full duplex mode

OFF

Copper port is in half duplex mode

【Specification】

Panel

100M copper port

10Base-T/100Base-TX

self-adaption

100M fiber port

100Base-FX fiber port

Indicator

Power supply indicator, fiber

port rate status indicator,

copper port rate status

indicator, fiber port connection

status indicator, copper port

connection status indicator,

copper port duplex indicator

Power supply

Model I

External 5VDC power supply,

DC round head

Model II

Built-in 220VAC (85~265VAC)

power supply, AC outlet with

switch

Model III

Built-in 48VDC power supply,

3-pin 5.08mm pitch terminal

blocks

Operating

environment

Operating temperature

-10~60℃

Storage temperature

-20~70℃

Operating humidity

5%~95% (no condensation)

Protection grade

IP30

Ce manuel convient aux modèles suivants

Autres manuels 3One data Convertisseur de média

3One data

3One data 1200 Manuel utilisateur

3One data

3One data PD101G Series Manuel utilisateur

3One data

3One data 3010 Manuel utilisateur

3One data

3One data IMC100-2T1F-1D Manuel utilisateur

3One data

3One data E232 Manuel utilisateur

3One data

3One data 485P Manuel utilisateur

3One data

3One data IPMC101 Series Manuel utilisateur

3One data

3One data 3012SS Manuel utilisateur

3One data

3One data 277 Manuel utilisateur

3One data

3One data USB4485 Manuel utilisateur

3One data

3One data E485 Manuel utilisateur

3One data

3One data 1200 Manuel utilisateur

3One data

3One data 1100SS Manuel utilisateur

3One data

3One data 1100SS Manuel utilisateur

3One data

3One data 277/B Manuel utilisateur

3One data

3One data Model277 Manuel utilisateur

3One data

3One data USB8232I Manuel utilisateur

3One data

3One data USB8485I Manuel utilisateur

3One data

3One data 1200 Series Manuel utilisateur

3One data

3One data IPMC100 Series Instructions d'utilisation et d'entretien

3One data

3One data IMC101GT Series Manuel utilisateur

3One data

3One data SW485GI Manuel utilisateur

3One data

3One data 7210 Series Manuel utilisateur

3One data

3One data CAN232 Manuel utilisateur

Manuels Convertisseur de média populaires d'autres marques

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuel utilisateur

SPROLINK

SPROLINK VA1 Manuel utilisateur

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuel utilisateur

Nikon

Nikon AF-S TC-20E III Manuel utilisateur

Axis

Axis AXIS Q7406 Manuel utilisateur

Omega

Omega TAC80B-J Manuel utilisateur

Zoom

Zoom Thunderbolt TAC-2R Manuel utilisateur

OST

OST iConverter 10/100M Manuel utilisateur

Vertiv

Vertiv Netsure Manuel utilisateur

birddog

birddog MINI Manuel utilisateur

Roland

Roland GI-10 Manuel utilisateur

Wallenstein

Wallenstein WX310 Manuel utilisateur

Pace

Pace MSS 200-1 Manuel utilisateur

Solar Converters

Solar Converters EQ 12/24-50 Manuel utilisateur

CYP

CYP EL-7400V Manuel utilisateur

TIE

TIE MIDI 1i1o Manuel utilisateur

DCS

DCS Vivaldi Upsampler Manuel utilisateur

Westermo

Westermo MCW-211 SERIES Manuel utilisateur