3Com WL-607 Manuel utilisateur

3Com AP9152 802.11n 2.4/5GHz

Single-Band Access Point

Quick Installation Guide

Model WL-607

3CRWE915275 / 3CRWE9152A75

BOM: 3104XXXX

Manual Version:

APW100

www.3com.com

3Com Corporation

350 Campus Drive,

Marlborough, MA,

USA 01752 3064

documentation may be reproduced in any form or by any means or used to make

any derivative work (such as translation, transformation, or adaptation) without

written permission from 3Com Corporation.

3Com Corporation reserves the right to revise this documentation and to make

changes in content from time to time without obligation on the part of 3Com

Corporation to provide notification of such revision or change.

3Com Corporation provides this documentation without warranty, term, or condition

of any kind, either implied or expressed, including, but not limited to, the implied

warranties, terms or conditions of merchantability, satisfactory quality, and fitness for

a particular purpose. 3Com may make improvements or changes in the product(s)

and/or the program(s) described in this documentation at any time.

If there is any software on removable media described in this documentation, it is

furnished under a license agreement included with the product as a separate

document, in the hard copy documentation, or on the removable media in a directory

file named LICENSE.TXT or !LICENSE.TXT. If you are unable to locate a copy,

please contact 3Com and a copy will be provided to you.

UNITED STATES GOVERNMENT LEGEND

If you are a United States government agency, then this documentation and the

software described herein are provided to you subject to the following:

All technical data and computer software are commercial in nature and developed

solely at private expense. Software is delivered as “Commercial Computer Software”

as defined in DFARS 252.227-7014 (June 1995) or as a “commercial item” as

defined in FAR 2.101(a) and as such is provided with only such rights as are

provided in 3Com’s standard commercial license for the Software. Technical data is

provided with limited rights only as provided in DFAR 252.227-7015 (Nov 1995) or

FAR 52.227-14 (June 1987), whichever is applicable. You agree not to remove or

deface any portion of any legend provided on any licensed program or

documentation contained in, or delivered to you in conjunction with, this User

Guide.

Unless otherwise indicated, 3Com registered trademarks are registered in the

United States and may or may not be registered in other countries.

3Com and the 3Com logo are registered trademarks of 3Com Corporation.

All other company and product names may be trademarks of the respective

companies with which they are associated.

ENVIRONMENTAL STATEMENT

It is the policy of 3Com Corporation to be environmentally-friendly in all operations.

To uphold our policy, we are committed to:

Establishing environmental performance standards that comply with national

legislation and regulations.

Conserving energy, materials and natural resources in all operations.

Reducing the waste generated by all operations. Ensuring that all waste conforms to

recognized environmental standards. Maximizing the recyclable and reusable

content of all products.

Ensuring that all products can be recycled, reused and disposed of safely.

Ensuring that all products are labelled according to recognized environmental

standards.

Improving our environmental record on a continual basis.

End of Life Statement

3Com processes allow for the recovery, reclamation and safe disposal of all

end-of-life electronic components.

Regulated Materials Statement

3Com products do not contain any hazardous or ozone-depleting material.

Environmental Statement about the Documentation

The documentation for this product is printed on paper that comes from sustainable,

managed forests; it is fully biodegradable and recyclable, and is completely

chlorine-free. The varnish is environmentally-friendly, and the inks are

vegetable-based with a low heavy-metal content.

About This Manual

Organization

3Com AP9152 802.11n 2.4/5GHz Single-Band Access Points Quick Installation Guide

is organized as follows:

Chapter Contents

1 Product Overview Introduces the hardware specifications, LEDs, and

interfaces of the 3Com AP9152.

2 Preparing for

Installation

Specifies the temperature and humidity

requirements, power supply for installing the 3Com

AP9152.

3 Installing the AP Introduces how to install the 3Com AP9152 and

how to connect the power supply by PoE.

4 Connecting to AP Introduces how to connent to and log into the

3Com AP9152.

Conventions

The manual uses the following conventions:

Symbols

Convention Description

Means reader be extremely careful. Improper

operation may cause bodily injury.

Means reader be careful. Improper operation may

cause data loss or damage to equipment.

Means an action or information that needs special

attention to ensure successful configuration or good

performance.

Means a complementary description.

Means techniques helpful for you to make

Convention Description

configuration with ease.

Obtaining Documentation

You can access the most up-to-date 3Com product documentation on the World Wide

Web at this URL: http://www.3com.com.

iii

Table of Contents

1 Product Overview....................................................................................................... i

Introduction..............................................................................................................i

Hardware Specifications..........................................................................................i

LEDs ...............................................................................................................i

Interfaces .......................................................................................................ii

2 Preparing for Installation ........................................................................................ iii

Unpacking and Inspection.....................................................................................iii

Temperature and Humidity Requirements............................................................iii

Power Supply ........................................................................................................iii

3 Installing the AP ....................................................................................................... iv

Determining the Installation Site ...........................................................................iv

Installing the AP.....................................................................................................iv

Mounting the AP on a Wall...........................................................................iv

Mounting the AP on a ceiling .............................................................................. viii

Mounting the AP to a T-Rail ..................................................................................ix

Power Supply by PoE............................................................................................xi

4 Connecting to the AP ............................................................................................. xii

Approved Channels..............................................................................................xii

Finding the IP Address on Networks with a DHCP Server(FIT AP) ....................xii

Finding the IP Address on Networks Without a DHCP Server(FAT AP).............xii

Log into the AP.....................................................................................................xii

Converting your Managed AP (FIT) to a Stand-alone AP (FAT)........................ xiii

Converting your Stand-alone AP (FAT) to a Managed AP (FIT)........................ xiii

Appendix A Product Overview

Introduction

The 3Com AP9152 is an 802.11n access point (AP) product developed by 3Com

Corporation. The AP9152 ships as a FAT AP to provide wireless access independently

without any access controller or serve as a FIT AP (managed) and operate with

wireless local area network (WLAN) switches or access controllers to provide wireless

access for WLAN users. The factory default configuration is FAT mode, and it can

easily be switch between the FIT mode.

Hardware Specifications

The physical dimensions and weight of the AP9152:

Physical dimensions (diameter × thickness) Weight

Φ190 × 60 mm (Φ7.48 × 2.36 in.)

Note: Φmeans diameter 0.5 kg (1.10 lb.)

The basic configurations of the AP9152:

Protocols and chassis material Internal antenna Power

consumption

IEEE 802.11a/b/g/n,

single-RF, plastic mold design

2.4 GHz, gain: 6 dBi

5 GHz, gain: 6 dBi 5.9 W to 7 W

LEDs

When the AP is connected to power, LEDs indicate activities as follows:

LED Color State Description

POWER Green

Steady on The power supply is normal.

Off The power supply is poorly connected or is

working abnormally.

10/100M

(Ethernet

interface

LED)

Green

Steady on The Ethernet interface is in the link-up state.

Off The Ethernet interface is in the link-down

state.

Blinking Data is being transmitted or received at

10/100 Mbps.

1000M

(Ethernet

interface

LED)

Green

Steady on The Ethernet interface is in the link-up state.

Off: The Ethernet interface is in the link-down

state.

Blinking Data is being transmitted or received at

1000 Mbps.

2.4G

(Wireless

link LED)

Green

Off The wireless link is not initialized or the link

is faulty.

Blinking

slowly The wireless link is working normally

Blinking

rapidly Data is being transmitted or received.

(Wireless

link LED)

Green

Off The wireless link is not initialized or the link

is faulty

Blinking

slowly The wireless link is working normally

Blinking

rapidly Data is being transmitted or received.

Interfaces

The AP9152 provides a console interface and an Ethernet interface.

iii

Note: The AP9152 provides a reset button and a security slot.

Descriptions of the interfaces on the AP9152:

Interface

silkscreen

Standards and

protocols Description

CONSOLE RS/EIA-232 The console interface is used for device

configuration and management.

ETHERNET

IEEE802.3

IEEE802.3u

IEEE802.3af

The Ethernet interface can serve as an uplink

interface to access the Internet and as a PoE

interface at the same time.

Caution: When connecting a cable to an interface, pay attention to the interface

silkscreen to avoid connection mistakes.

Appendix B Preparing for Installation

Unpacking and Inspection

Before unpacking the unit, make sure that the package is intact, without any sign of

damage. When unpacking the unit, avoid excessive force, otherwise, the unit inside

the package may get damaged.

After unpacking the unit, check that all items listed on the packing list are contained. If

any of the items are missing, contact your local dealer immediately.

Temperature and Humidity Requirements

The operating temperature and humidity requirements are as follows:

Specification Range

Operating temperature 0°C to 45°C (32°F to 113°F)

Storage temperature –40°C to +70°C (–40°F to +158°F)

Relative humidity (non-condensing) 5% to 95%

Power Supply

The AP9152 supports PoE power supply.

Appendix C Installing the AP

Note:

1) Make sure that no metal particles (such as screws) fall into the Ethernet or

console interfaces during installation.

2) Before installing the AP9152 to the wall-mounting bracket, connect the

network cable. The network cable can only be UTP cat-5.

3) Before connecting the console cable to the AP9152 for debugging or

pressing the reset button, you need to remove the device from the

wall-mounting bracket.

Determining the Installation Site

Determine the installation site by observing the following principles:



Install the AP in an area away from obstacles that can cause

interference.



Keep the AP far away from electronic devices (such as microwave

ovens) that may generate RF noise.



Ensure that the installation site will not cause any inconvenience or

nuisance.

Note:

1) Make sure the ceiling is strong enough and the structure is suitable in case of

ceiling mounting. Reinforce the ceiling if needed.

2) Us a Kensington lock if physical security is required to protect the AP from

being stolen.

Installing the AP

The AP9152 support three installation methods:



Mounting the AP on a wall



Mounting the AP on a ceiling



Mounting the AP to a T-rail

Mounting the AP on a Wall

The following describes how to mount an AP9152 on a wall:



Installing the wall-mounting bracket on the wall



Installing the AP on the wall-mounting bracket



Locking the AP onto the wall-mounting bracket (optional)

Installing the wall-mounting bracket on the wall

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels 3Com Point d'accès sans fil

3Com

3Com 8250 Manuel utilisateur

3Com

3Com WL-455 Manuel utilisateur

3Com

3Com 3CRWE820096A - Wireless LAN Access Point... Manuel utilisateur

3Com

3Com AP7760 Manuel utilisateur

3Com

3Com 3CRWE825075A Manuel utilisateur

3Com

3Com 3CRWE675075 - 11a/b/g Wireless LAN Workgroup... Manuel utilisateur

3Com

3Com 7760 - Wireless 11a/b/g PoE Access Point Manuel utilisateur

3Com

3Com OfficeConnect 3CRWE454A72 Manuel utilisateur

3Com

3Com OfficeConnect 3CRWE454G72 Manuel utilisateur

3Com

3Com OfficeConnect 3CRWE454A72 Guide de référence

3Com

3Com 3CRWE870075A - Wireless LAN Access Point... Manuel utilisateur

3Com

3Com AP9552 Manuel utilisateur

3Com

3Com 3CRWE20096A - Wireless LAN Access Point 2000 Manuel utilisateur

3Com

3Com MAP 2750 Manuel utilisateur

3Com

3Com 8500 Manuel utilisateur

3Com

3Com AP9152 Manuel utilisateur

3Com

3Com 3CRWEASYA73 / WL-575 Manuel utilisateur

3Com

3Com 3950 Manuel utilisateur

3Com

3Com 3CRWX395075A - Wireless LAN Managed Access Point... Manuel utilisateur

3Com

3Com 3CRWX275075A - Wireless LAN Managed Access Point... Manuel utilisateur

3Com

3Com Wireless 11n USB Adapter Manuel utilisateur

3Com

3Com LANplex 6000 Manuel utilisateur

3Com

3Com OfficeConnect 3CRWE41196 Manuel utilisateur

3Com

3Com OfficeConnect 3CRWE454A72 Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur